Colloidal ZnO nanostructures and functional coatings: A survey

The past research work devoted to ZnO nanocolloidal sol-gel route is reviewed. It highlights the cluster chemistry of alcoholic ZnAc₂ solutions and the results of ZnO colloid growth investigations performed worldwide. Moreover, the role of doping and co-doping in the processing of functional ZnO coatings is discussed. The possibilities of tuning the optical properties are also reported with a particular attention to luminescence. The last part of this paper deals with electrical and photoelectrochemical properties of ZnO nanocrystals and their aggregates. This contribution is dedicated to the 80th birthday of Prof. Arnim Henglein from the Hahn-Meitner-Institut in Berlin and to the memory of Prof. Jacques Mugnier from the Université Claude-Bernard Lyon 1 in France.     

Transparent carbon nanotube coatings

Thin networks of carbon nanotubes (CNTs) are sprayed onto glass or plastic substrates in order to obtain conductive transparent coatings. Transparency and conductivity at room temperature of different CNT material are evaluated. CNT coatings maintain their properties under mechanical stress, even after folding the substrate. At a transparency of 90% for visible light we observe a surface resistivity of 1 kΩ/sq which is already a promising value for various applications.     

低温和低压下水热合成Na4Zr2(SiO4)3

以ZrOCl_2·8H_2O,Na_2SiO_3·9H_2O和NaOH为原料,在250℃约100bar的条件下,水热晶化合成出Na_4Zr_2(SiO_4)_3,并生长相应的单晶。讨论了水热反应及其条件.产物借助于XRD,Raman,~(29)Si MAS NMR以及阻抗谱技术进行了研究.结果表明产物具有与其他方法制备的Na_4Zr_2(SiO_4)_3相同的性质.     

The surface and materials science of tin oxide

The study of tin oxide is motivated by its applications as a solid state gas sensor material, oxidation catalyst, and transparent conductor. This review describes the physical and chemical properties that make tin oxide a suitable material for these purposes. The emphasis is on surface science studies of single crystal surfaces, but selected studies on powder and polycrystalline films are also incorporated in order to provide connecting points between surface science studies with the broader field of materials science of tin oxide. The key for understanding many aspects of SnO₂ surface properties is the dual valency of Sn. The dual valency facilitates a reversible transformation of the surface composition from stoichiometric surfaces with Sn⁴⁺ surface cations into a reduced surface with Sn²⁺ surface cations depending on the oxygen chemical potential of the system. Reduction of the surface modifies the surface electronic structure by formation of Sn 5s derived surface states that lie deep within the band gap and also cause a lowering of the work function. The gas sensing mechanism appears, however, only to be indirectly influenced by the surface composition of SnO₂. Critical for triggering a gas response are not the lattice oxygen concentration but chemisorbed (or ionosorbed) oxygen and other molecules with a net electric charge. Band bending induced by charged molecules cause the increase or decrease in surface conductivity responsible for the gas response signal. In most applications tin oxide is modified by additives to either increase the charge carrier concentration by donor atoms, or to increase the gas sensitivity or the catalytic activity by metal additives. Some of the basic concepts by which additives modify the gas sensing and catalytic properties of SnO₂ are discussed and the few surface science studies of doped SnO₂ are reviewed. Epitaxial SnO₂ films may facilitate the surface science studies of doped films in the future. To this end film growth on titania, alumina, and Pt(1 1 1) is reviewed. Thin films on alumina also make promising test systems for probing gas sensing behavior. Molecular adsorption and reaction studies on SnO₂ surfaces have been hampered by the challenges of preparing well-characterized surfaces. Nevertheless some experimental and theoretical studies have been performed and are reviewed. Of particular interest in these studies was the influence of the surface composition on its chemical properties. Finally, the variety of recently synthesized tin oxide nanoscopic materials is summarized.     

Structure of the neutral metal complex Pt(dddt)2

A neutral metal complex, [Pt(dddt)₂]° (1), has been obtained by oxidation of the [Pt(dddt)₂]^– anion with excess (Bu₄N)AuBr₄ in nitrobenzene. Crystallographic data for 1a=17.854(9) Å,b=18.409(9) Å,c=4.717(5) Å, =68.83(2)°, space group P2₁/n,Z=4,d _calc=2.55 g/cm³. In1 two independent centrosymmetric [Pt(dddt)₂]° molecules are packed in stacks that form layers parallel to the (110) plane. The molecules of1 in the layers have shortened S...S contacts 3.491(9) Å, and 3.594(10) Å. The average bond lengths Pt-S 2.242(7) Å, S-C 1.71(2) Å and C=C 1.40(3) Å, together with the square-planar coordination of Pt in PtS₄, suggest considerable conjugation in the metal cycles.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1207–1209, July, 1993.     

Hybrid Molecular Materials Based upon Organic π-Electron Donors and Inorganic Metal Complexes. Conducting Salts of Bis(ethylenediseleno)tetrathiafulvalene (BEST) with the Octahedral Anions Hexacyanoferrate(III) and Nitroprusside

The synthesis, structure and physical characterization of three new radical salts formed by the organic donor bis(ethylenediseleno)tetrathiafulvalene (BEDS-TTF or BEST) and the paramagnetic hexacyanoferrate(III) anion [Fe(CN)₆]³⁻ or the photochromic nitroprusside anion [Fe(CN)₅NO]²⁻ are reported: (BEST)₄[Fe(CN)₆] (1), (BEST)₃[Fe(CN)₆]₂·H₂O (2) and (BEST)₂[Fe(CN)₅NO] (3). Salts 1 and 3 show a layered structure with alternating organic (β-type packing) and inorganic slabs. Salt 2 shows an original interpenetrated structure probably due to the unprecedented presence of (BEST)²⁺ dications. The three salts are semiconductors although salt 1 exhibits a high room temperature conductivity and a semiconducting-semiconducting transition at ca. 150 K which has been attributed to a dimerization in the organic sublattice.     

Oxygen transport in La<Subscript>0.6</Subscript>Sr<Subscript>0.4</Subscript>Co<Subscript>1−<Emphasis Type="Italic">y</Emphasis></Subscript>Fe<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript>O<Subscript>3−δ</Subscript>

The surface exchange coefficient and chemical diffusion coefficient of oxygen for the perovskites La_0.6Sr_0.4Co_1–yFe_yO_3– (y=0.2, 0.5 and 0.8) were measured using the conductivity relaxation technique. Measurements were performed between 600 and 800 °C in an oxygen partial pressure range between 10^–4 and 1 bar. Both transport coefficients decrease markedly with decreasing oxygen partial pressure below about 10^–2 bar at all temperatures. This is attributed to ordering of oxygen vacancies. Implications for using La_0.6Sr_0.4Co_1–yFe_yO_3– as an oxygen separation membrane are discussed.Presented at the OSSEP Workshop Ionic and Mixed Conductors: Methods and Processes, Aveiro, Portugal, 10-12 April 2003     

实用化超导材料研究进展与展望

超导技术是21世纪具有重大经济和战略意义的高新技术,在国民经济诸多领域具有广阔的应用前景,如在超导弱电应用中的超导量子干涉器、滤波器;在超导强电应用中的电缆、限流器、电机、储能系统、变压器、磁体技术、医疗核磁共振成像、高能物理实验和高速交通输运等。实用化超导材料是超导技术发展的基础。目前,国际上发现的实用化超导材料主要有低温超导线材、铋系高温超导带材、YBCO涂层导体、MgB₂线带材以及新型铁基超导线带材。文章在简要介绍超导材料发展历程的基础上,重点综述了上述实用化超导材料制备及加工、性能和应用方面的最新研究进展,并对相关领域存在的问题及今后的发展作出展望。     

Towards Single-component Molecular Conductor [Ni(dmit)_2] by Charge Disproportionation:2[Ni(dmit)_2]~(-0.5)[Ni(dmit)_2]+[Ni(dmit)_2]~-

It was commonly thought that a molecular conductor or semiconductor should be composed of at least two components to make the conducting component in partially charged state. However, this idea became questionable by the recent report of the single-component molecular conductor [Ni(tmdt)2]1 as well as several reports about single-component molecular semiconductors such as [Ni(ptdt)2]2 and [Ni(C10H10S8)2]3. In fact, as early as 1985, [Ni(dmit)2] as a by-product in synthesizing TTF[Ni(dmit…     

Transparent poly(bisphenol A carbonate)-based nanocomposites with high refractive index nanoparticles

Transparent organic-inorganic nanocomposites were successfully synthesized from sulfonic acid-modified poly(bisphenol A carbonate) (SPC) and TiO₂ or ZrO₂ nanoparticles. The dispersibility of nanoparticles was significantly improved by both the surface treatment of nanoparticles with phosphoric acid 2-ethylhexyl esters (PAEH) and the introduction of a sulfonic acid moiety into the PC chain. It was found that in some cases, crystallization of the matrix caused a reduction in transparency. Efficient dispersion of nanoparticles and the absence of crystallization resulted in highly transparent nanocomposites with up to 42 wt% TiO₂ and 50 wt% ZrO₂ nanoparticles. The refractive indices of the nanocomposites based on SPC increased with the increasing amount of nanoparticles. Theoretical equation based on Maxwell-Garnett effective medium theory provided reasonably close estimation of the refractive indices to the experimentally observed values. The prepared nanocomposites had lower thermal stability than the host matrix polymers.