Dicyclopentadienyl complexes of titanium,niobium, and tungsten in the controlled synthesis of poly(methyl methacrylate)

Organometallic compounds Cp₂TiCl₂, (EtC₅H₄)₂NbCl₂, and (PrⁱC₅H₄)₂WCl₂ were assessed as additives that control polymer chain growth in the polymerization of methyl methacrylate. In the presence of compounds mentioned in amounts comparable with that of the initiator, a uniform process with no gel-effect occured and respective linear increase in the molecular weight of the polymer up to high degrees of the monomer conversion was observed.     

教学质量的时齐马尔可夫链评估法

本文研究了教学质量评估中的一种定量分析方法──时齐马尔可夫链评估法．阐明了这种方法的理论依据及其实施程序、并指出它较之其他教学质量评估法更显合理．     

Transfer matrix approach of vibration isolation analysis of periodic composite structure

The transmission properties of elastic waves propagating in a three-dimensional composite structure embedded periodically with spherical inclusions are analyzed by the transfer matrix method in this paper. Firstly, the periodic composite structures are divided into many layers, the transfer matrix of monolayer structure is deduced by the wave equations, and the transfer matrix of the entire structure is obtained in the case of boundary conditions of displacement and stress continuity between layers. Then, the effective impedance of the structure is analyzed to calculate its reflectivity and transmissivity of vibration isolation. Finally, numerical simulation is carried out; the experiment results validate the accuracy and feasibility of the method adopted in the paper and some useful conclusions are obtained. Project (No. 50075029) supported by the National Natural Science Foundation of China.     

Generalized KKM Type Theorems in FC-Spaces with Applications (I)

The class KKM(X,Y) (resp., s-KKM(X,Y,Z)) of set-valued mappings with KKM (resp., s-KKM) property is introduced in FC-spaces without any convexity structure. Some generalized KKM (resp., s-KKM) type theorems are proved in FC-spaces under much weak assumptions. As applications, some new section theorems and coincidence theorems are established in FC-spaces. These theorems generalize many known results in literature. The further applications of these results will be given in a follow-up paper.     

强流直线感应加速器中束流质心横向运动初步计算

 “神龙一号”强流脉冲加速器由72个直线感应加速腔和18个用于测试和真空泵接口的多功能腔组成。直线感应加速器的研制建造中磁轴对中偏差和聚焦磁场的自然偏差所引起的束流质心偏移轨道中心是不可避免的，由于束脉冲期间存在能散，使束流产生Corkscrew运动,导致束流品质变坏。而束脉冲期间的能散只能减小到一定水平，因此必需采取一定的措施抑制Corkscrew幅度的增长。在加速器的安装阶段，脉冲悬丝技术被应用于准直加速段聚焦磁场，并在磁轴准直测试的同时对磁场固有倾斜偏差进行初步校正。根据脉冲悬丝测试所得实验数据，采用传输矩阵法对加速段束质心轨迹进行了初步估计，计算中考虑了各加速腔聚焦磁场的倾斜和偏移误差。给出了计算结果和分析。     

Axisymmetric frictionless contact of functionally graded materials

The main interest of this study is a new method to solve the axisymmetric frictionless contact problem of functionally graded materials (FGMs). Based on the fact that an arbitrary curve can be approached by a series of continuous but piecewise linear curves, the FGM is divided into a series of sub-layers with shear modulus varying linearly in each sub-layer and continuous at the sub-interfaces. With this model, the axisymmetric frictionless contact problem of a functionally graded coated half-space is investigated. By using the transfer matrix method and Hankel integral transform technique, the problem is reduced to a Cauchy singular integral equation. The contact pressure, contact region and indentation are calculated for various indenters by solving the equations numerically. An erratum to this article can be found at     

(甲基)丙烯酸酯的基团转移聚合

<正> 基团转移聚合方法自问世以来,由于其突出的优点,受到日益广泛的重视。本文来用丙二酸二乙酯的硅烯醇醚类引发剂3-乙氧基-3-三甲基硅氧基丙烯酸乙酯 (CH_3CH_2O_2CCH=C(OCH_2CH_3)OSiMe_3)和亲核型催化剂四乙基二氯化氢氨((CH_3CH_2)_4NHF_2)进行甲基丙烯酸甲酯(MMA)、丙烯酸丁酯(BA)、丙烯酸乙酯(EA)和丙烯酸甲酯(MA)的基因转移聚合。得到了近     

四烷基锡中性载体推动亚硝酸根离子迁移穿透大块液膜

通过大块液膜体系研究了四烷基锡的碳链长度、载体浓度.NO_2~-浓度及抗衡离子等因素对NO_2~_穿透含四烷基锡的液膜的传质速率的影响,讨论了它们与四烷基锡为载体的离子电极性能间的关系。NO_2~-通过四烷基锡为载体的液膜的迁移规律符合离子对传输模式。     

三磷酸胞苷在Duolite A-30树脂上的交换过程研究

根据CTP在离子交换树脂上的吸附容量和分离因数的大小,确定Duolite A-30树脂适合CTP与CDP,CMP之间的分离.对CTP在Duolite A-30树脂上的吸附动力学和热力学研究表明,在283.15K~303.15K之间,CTP的质量浓度在7.5g/L以上时,Duolite A-30树脂对CTP的吸附主要受颗粒扩散的控制,其有效扩散系数为D=3.47×10-7cm2/s,溶液的质量浓度≤1.0g/L时,CTP与Duolite A-30树脂之间的交换速率主要受液膜控制,其液膜扩散系数为Kf =4.112×10-4/s.同时测定了不同条件下三磷酸胞苷溶液在Duolite A-30树脂固定床离子交换柱中的穿透曲线,研究了进口浓度、进口流速、原料液温度、原料液的pH值及柱高对穿透曲线的影响.用二阶动力学推动力模型描述固定床动态过程,考察了轴向返混对穿透曲线的影响,并从穿透曲线回归得到总传质系数,模型计算值与实验数据符合良好.     

纳米TiO2的光生电荷迁移特性研究

利用场诱导光电压谱(简称FISPS)和瞬态光伏(简称TPV)技术研究了TiO₂的光生电荷的产生和传输机制.发现光生电荷在体块TiO₂上的迁移机制不同于在纳米TiO₂上的迁移机制，也不同于在结界面空间电荷区的迁移机制. 400 ℃处理的TiO₂颗粒表面具有大量的表面态，光生电荷被表面态捕获-释放机制控制着光伏行为的过程是慢过程. 800 ℃处理的TiO₂已经形成了完整的能带结构，光伏响应除了表现带-带跃迁外,还有一个在带边的自由激子带，光生电荷被表面自建场驱动进行传递的过程是快过程. 600 ℃处理的TiO₂混晶由锐钛矿型和金红石型两种构型组成，在两相之间存在着较低势垒的结界面．它的光伏响应受控于两种机制 ：光生电荷在两相间结界面空间电荷区的传输和在表面自建场驱动下的传输.当激发光强较小时，界面空间电荷区的光生电子由于积累的浓度较小而不能隧穿过结界面，这种场助隧穿只有在外场作用下才能发生.