Electrochemical technique for the determination of fractal dimension of dental surfaces

Fractal dimension of a carious tooth surface was determined using an electrochemical method. The method was based on time-dependent diffusion towards electrode surfaces, which is one of the most useful and reliable methods for the determination of fractal dimension of electrode surfaces. For this purpose, the tooth was covered with a gold layer, which acted as an electrode in electrochemical experiments. It is suggested that the fractal dimension can be used as a quantitative measure of the state of dental surfaces. The method presented demonstrates the power of electrochemical techniques for the determination of fractal dimension of surface of non-conducting objects.     

Distorted wave response of ultrasonic annular stator incorporating non-uniform geometry

The traveling wave ultrasonic stator is normally fabricated with teeth. The tooth geometry improves the driving speed, but it creates natural frequency splitting and mode contamination, especially a distorted traveling wave. A dynamic model of a stepped-plate periodic stator is developed to examine the distortion. The stator is treated as an annular supported by a thin mid plate, and the support stiffness is formulated by using equivalent energy principle. The effects of the tooth and mid plate on the natural frequency and vibration mode are examined by using the perturbation method. The rules governing the frequency splitting, frequency perturbation as well as mode contamination are also identified. The traveling wave response and elliptical trace on stator surface are obtained by using the mode superposition method and they are proved to be distorted due to the tooth geometry. The response at the repeated doublets becomes coupled forward and backward traveling waves, but that at the split doublets becomes coupled forward traveling, standing and backward traveling waves. The results indicate that the tooth mass instead of the stiffness decreases the vibration amplitude and driving speed of the dominant wave, but their effects are different at the repeated and split doublets. Inspection of the model implies that the distortion can be suppressed by using a suitable combination of the wavenumber, tooth count, tooth height and occupying fraction. Numerical calculations are carried out to demonstrate the tooth geometry effect on the transient waveform, driving speed and elliptical trace. The optimization of the tooth geometry that can help achieve a purer traveling wave is discussed.     

A modified rheometer for in-situ radial and tangential SAXS studies on shear-induced alignment

A tooth rheometer designed to investigate the influence of large amplitude oscillatory shear on the macroscopic orientation of complex fluids is described. The rheometer allows in-situ two-directional small-angle scattering measurements, making it possible to observe in particular the orientation process of hierarchically structured block copolymers in dynamics. Experiments performed with a linear poly(vinyl methyl ether) show that, despite a considerable gap/width ratio, the rheometer can be used for adequate rheological measurements. In addition we found an unexpected dependence of the dynamic parameters on the rheometer gap. The small amount of sample required favors the use of this rheometer for measuring the rheological characteristics of new compounds.     

Computerized Developments in Design,Generation, Simulation of Meshing,and Stress Analysis of Gear Drives

The paper represents new computerized developments in design, generation, simulation of meshing, and stress analysis of gear drives. The main contents of the paper are: (i) application of a predesigned parabolic function of transmission errors for reduction of noise, (ii) computerized simulation of noise caused by transmission errors, (iii) modification of the basic algorithm of tooth contact analysis, and (iv) application of approaches developed for enhanced design and simulation of meshing of the following gear drives: (a) spiral bevel gear drives, (b) face-gear drives (including an approach for grinding), and (c) modified helical gear drives. The developed theory is illustrated with numerical examples.     

表面解吸常压化学电离质谱法直接分析牙齿微区表面

采用纳升取样表面解吸常压化学电离质谱法(nano-SDAPCI-MS)结合主成分分析(PCA),建立了一种采用具有微米级针尖的金属取样针直接对龋齿不同部位取样并进行快速质谱分析的方法.数据分析结果表明,同一颗龋齿不同部位的质谱指纹谱图之间存在差异;在不需要样品预处理的前提下通过串联质谱快速测定了龋齿中的乳酸、丙酮酸、苯乙酸和丙酸等成分.采用PCA方法可较好地将龋齿病灶位置与邻近正常组织进行区分,也可对不同牙病及健康牙齿进行区分.本方法可方便地对牙齿进行直接微区分析,为鉴别牙齿疾病及观测治疗效果提供了一种快速、简单的方法,为生物体中微细部位的快速取样及直接质谱分析提供了一种可能的解决方案.     

Box-modeling of bone and tooth phosphate oxygen isotope compositions as a function of environmental and physiological parameters*

A time-dependent box model is developed to calculate oxygen isotope compositions of bone phosphate as a function of environmental and physiological parameters. Input and output oxygen fluxes related to body water and bone reservoirs are scaled to the body mass. The oxygen fluxes are evaluated by stoichiometric scaling to the calcium accretion and resorption rates, assuming a pure hydroxylapatite composition for the bone and tooth mineral. The model shows how the diet composition, body mass, ambient relative humidity and temperature may control the oxygen isotope composition of bone phosphate. The model also computes how bones and teeth record short-term variations in relative humidity, air temperature and δ¹⁸O of drinking water, depending on body mass. The documented diversity of oxygen isotope fractionation equations for vertebrates is accounted for by our model when for each specimen the physiological and diet parameters are adjusted in the living range of environmental conditions.     

Optimization of DNA extraction from dental remains

Efficient DNA extraction procedures is a critical step involved in the process of successful DNA analysis of such samples. Various protocols have been devised for the genomic DNA extraction from human tissues and forensic stains, such as dental tissue that is the skeletal part that better preserves DNA over time. However DNA recovery is low and protocols require labor‐intensive and time‐consuming step prior to isolating genetic material. Herein, we describe an extremely fast procedure of DNA extraction from teeth compared to classical method. Sixteen teeth of 100‐year‐old human remains were divided into two groups of 8 teeth and we compared DNA yield, in term of quantity and quality, starting from two different sample preparation steps. Specifically, teeth of group 1 were treated with a classic technique based on several steps of pulverization and decalcification, while teeth of group 2 were processed following a new procedure to withdraw dental pulp. In the next phase, the samples of both group underwent the same procedure of extraction, quantification and DNA profile analysis. Our findings provide an alternative protocol to obtain a higher amount of good quality DNA in a fast time procedure, helpful for forensic and anthropological studies.     

A method for identification of interfering signals in EPR dating of tooth enamel

In this paper, a method for identifying interfering EPR signals in fossil tooth enamel is presented. This method consists of optimizing EPR parameters to enhance spectral resolution of the fossil signals followed by a g-factor and intensity normalized subtraction of a high-dosed, modern tooth enamel sample spectrum. By scanning the modern tooth enamel sample with the same parameters as the fossil sample, the difference spectrum of the fossil and modern irradiated tooth enamel samples can resolve numerous hyperfine and other interfering signals. This method was successfully applied to a fossil sample studied elsewhere (Grün, R., 1998a. Ancient TL 16, 51–55; Grün, R., Clapp, R., 1996. Ancient TL 14, 1–5; Martin Jonas, 1997. Ph.D. Thesis, Cambridge University; Jonas, M., Grün, R., 1997. Radiat. Meas. 27, 49–58; Vanhaelewyn et al., 2000. Appl. Radiat. Isot. 52, 1317–1326). This sample has shown discrepancies in dose estimations obtained from the power absorption curve versus those obtained from the first derivative spectra (Grün, R., 1998b. Radiat. Meas. 29, 177–193). The reason for this, and other discrepancies, are accounted for by the signals resolved using the method presented here.     

高速传输系统CAD/CAM齿形误差最优化算法

本文提出了一种CAD/CAM齿形误差的最优化算法。本算法收敛速度快、拟合误差小,能够按照预定设计要求对齿形精度加以控制,实现最优化自动搜索,同时给出数值计算结果。     

牙齿磷光检测技术研究

本文分析了牙齿磷光测量技术一直不能进一步发展的原因,提出了一种新的检测技术。这种技术利用光纤传输紫外光和磷光,利用光电接收器作为传感器,解决了牙齿磷光现象一直不能定量分析的问题,使得牙齿磷光现象与牙齿疾病之间关系的研究得到了进一步的发展。