Selectivity changes towards steroids in packed column supercritical fluid chromatography (SFC) induced by temperature and pressure variation

Summary Pressure/temperature variation in SFC was shown to influence selectivity towards steroids. Major changes were observed for polar column packings compared to non-polar packings and variation of the amount of modifier showed that this is valid over the whole investigated range. The effect is underlined by a fall in resolution in the low density range (low pressure/high temperature) for polar stationary phases and appears to be significantly larger than for non-polar phases. Major selectivity shifts induced by variation of the physical properties of the mobile phase are considered to be due to the greater effect of polar modifiers on the nature of polar stationary phases than on non-polar phases.     

Solution of large‐scale weighted least‐squares problems

A sequence of least‐squares problems of the form min_y∥G^1/2(A^T y?h)∥₂, where G is an n×n positive‐definite diagonal weight matrix, and A an m×n (m?n) sparse matrix with some dense columns; has many applications in linear programming, electrical networks, elliptic boundary value problems, and structural analysis. We suggest low‐rank correction preconditioners for such problems, and a mixed solver (a combination of a direct solver and an iterative solver). The numerical results show that our technique for selecting the low‐rank correction matrix is very effective. Copyright © 2002 John Wiley & Sons, Ltd.     

A Noninvasive, on Wafer Method to Determine the Intrinsic Stress of a Polymer Layer

The method described in this paper allows an investigator to determine the intrinsic stress of a polymer layer in a way that does not result in damage to devices or test structures. The method requires that a small area of the polymer be released from the substrate to form a diaphragm. The diaphragm is stimulated with acoustic white noise and the diaphragm movement is monitored with a laser vibrometer. The first few resonance frequencies of the diaphragm are obtained using a laser vibrometer and then those frequencies are used to calculate the membrane intrinsic bi-axial tension.     

Writhing instabilities of twisted rods: from infinite to finite length

We use three different approaches to describe the static spatial configurations of a twisted rod as well as its stability during rigid loading experiments. The first approach considers the rod as infinite in length and predicts an instability causing a jump to self-contact at a certain point of the experiment. Semi-finite corrections, taken into account as a second approach, reveal some possible experiments in which the configuration of a very long rod will be stable through out. Finally, in a third approach, we consider a rod of real finite length and we show that another type of instability may occur, leading to possible hysteresis behavior. As we go from infinite to finite length, we compare the different information given by the three approaches on the possible equilibrium configurations of the rod and their stability. These finite size effects studied here in a 1D elasticity problem could help us guess what are the stability features of other more complicated (2D elastic shells for example) problems for which only the infinite length approach is understood.     

NATA: 50 years experience with accreditation

 Laboratory accreditation is becoming increasingly accepted around the world as a means of identifying technically competent laboratories. It is also being used as a mechanism for the acceptance of test data both nationally and internationally. The concept and mechanisms of accreditation have been developed over the past 50 years. The first national laboratory accreditation system appeared in Australia in 1947. This organisation, known as the National Association of Testing Authorities (NATA), has since taken a leading role in developing accreditation practices that are now used world-wide in evaluating testing, measurement and calibration laboratories. This paper examines the development of the world's first and largest laboratory accreditation system, and looks at the difficulties and triumphs in gaining acceptance and recognition by government and industry of the benefits of laboratory accreditation. Received: 24 June 1996 Accepted: 25 June 1996     

Signal averaging in gas chromatography

Ensemble or signal averaging, and the use of the technique for the solution of some unique problems with minimum sample handling, have previously been reported. The capability of the technique has been evaluated with microbore gas chromatography for the fast handling of a large number of analyses: ca 20–30 replicate injections are easily attainable in a reasonable analysis time. The implementation of the signal averaging technique with other concentration techniques for improving detection limits is also demonstrated.     

Flaked capillary columns with crown ether complexes for gas-liquid chromatography

Flaked capillary columns with an OV-101/CE-Na{in3}PO{in4} hydrophobic-hydrophilic sorbent have been suggested. This sorbent provides for the analysis of polar and nonpolar substances, including amines and aminoalcohols, in aqueous and organic solvents. The efficiency of new columns was demonstrated for the analysis of 25 organic substances of various classes.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2169–2173, December, 1994.The work was financially supported by the Russian Foundation for Basic Research, Project No. 93-03-4969.     

Native ethylene glycol in wine: Application of a dead volume free,very fast “deans heart-cut” system on-line with multi-chromatography

Data about the existence of native HO? CH₂? CH₂? OH (MEG) in natural wines and champagne has led to delicate questions because of legal decisions already made to declare wine or champagne illegal for sale if the MEG concentrations found are above 10 mg/liter. Action has been taken because of the DEG (diethylene glycol) disaster in European wines of 1985…86. An incorrect legal decision was made due to the belief that MEG cannot be produced biochemically by grape vines. A further reason may be lack of correct data on native MEG trace concentrations, as a result of the special behavior of this diol. As first member of a homologous series whose higher members (C₄) are normally found in all wines at quite high concentration levels, MEG shows extremely adsorptive behavior. The solution of the chromatographic problems is summarized in this paper. MEG concentrations in Riesling as example are in the range of 2 to 6 mg/liter and can easily be increased by biotechnological steps to a level of around 10 to 60 mg/liter. This is again due to the specific adsorptive behavior of MEG, which can be enriched on filter surfaces and displaced when the wine acidity changes with changing types. In order to control and guarantee the qualitative and quantitative results of MEG analyses we used a combination of Deans heart cutting on-line with Multi-Chromatography. It was easy to produce false data by many otherwise useful single column or two-dimensional separation processes, etc.     

Overloaded elution band profiles of ionizable compounds in reversed‐phase liquid chromatography: Influence of the competition between the neutral and the ionic species

The parameters that affect the shape of the band profiles of acido‐basic compounds under moderately overloaded conditions (sample size less than 500 nmol for a conventional column) in RPLC are discussed. Only analytes that have a single pK_a are considered. In the buffer mobile phase used for their elution, their dissociation may, under certain conditions, cause a significant pH perturbation during the passage of the band. Two consecutive injections (3.3 and 10 μL) of each one of three sample solutions (0.5, 5, and 50 mM) of ten compounds were injected on five C₁₈‐bonded packing materials, including the 5 μm Xterra‐C₁₈ (121 Å), 5 μm Gemini‐C₁₈ (110 Å), 5 μm Luna‐C₁₈(2) (93 Å), 3.5 μm Extend‐C₁₈ (80 Å), and 2.7 μm Halo‐C₁₈ (90 Å). The mobile phase was an aqueous solution of methanol buffered at a constant _W^WpH of 6, with a phosphate buffer. The total concentration of the phosphate groups was constant at 50 mM. The methanol concentration was adjusted to keep all the retention factors between 1 and 10. The compounds injected were phenol, caffeine, 3‐phenyl 1‐propanol, 2‐phenyl butyric acid, amphetamine, aniline, benzylamine, p‐toluidine, procainamidium chloride, and propranololium chloride. Depending on the relative values of the analyte pK_a and the buffer solution pH, these analytes elute as the neutral, the cationic, or the anionic species. The influence of structural parameters such as the charge, the size, and the hydrophobicity of the analytes on the shape of its overloaded band profile is discussed. Simple but general rules predict these shapes. An original adsorption model is proposed that accounts for the unusual peak shapes observed when the analyte is partially dissociated in the buffer solution during its elution.