Photoinitiators with functional groups. VII. Covalently bonded camphorquinone—amines

Camphorquinone (CQ), a widely used photoinitiator (PI) in dental applications, was covalently bonded to aromatic amines to enhance the rate of electron and proton transfer effect due to the close vicinity of the diketone and the amine group. 10‐bromocamphorquinone and 10‐bromomethylcamphorquinone were selected as suitable precursors for esterification with the carboxyl group containing aromatic amines based on 4‐dimethylaminobenzoic acid. Properties of the new photoinitiating systems were investigated by UV spectroscopy and differential scanning photocalorimetry in lauryl acrylate. Compared to physical mixtures, in all cases similar or even better performance was obtained. Surprisingly, 10‐acetyl derivatives 7 – 9 and 18 especially, were found to be highly reactive. Compared to CQ/ethyl 4‐dimethylaminobenzoate, the rate of photopolymerization was increased by a factor of up to 2. Intramolecular reaction was confirmed by photo‐differential scanning calorimetry experiments with varying PI concentrations. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 4948–4963, 2004     

A novel hyperbranched polyester acrylate used for microfabrications

A novel hyperbranched polyester acrylate (HPEA) was synthesized based upon ethylenediamine tetraacetic acid as a “core” molecule, 5‐hydroxyisophthalic acid as an AB₂ monomer, and 2‐hydroxyethyl acrylate as an endcapping reagent. The obtained oligomer has an unsaturation concentration of 4.10 mmol_C?C g^?1 measured by nuclear magnetic resonance and a wide molecular weight distribution of 1.64 measured by gel permeation chromatography. The two‐photon absorption (TPA) photopolymerization of HPEA under the exposure of a Ti : sapphire femtosecond laser with a wavelength of 800 nm was investigated through laser exposure dose‐dependant spatial resolutions of its resins. The TPA photopolymerization thresholds at the range 1.6–4.3 × 10⁷ mJ cm^?2, and exposure dose windows at the range 3.4–4.3 for three formulations were determined. A spatial resolution of 0.85 μm was obtained through the TPA photopolymerization of the formulation containing 1 wt% photoinitiator and 0.3 wt% photoinhibitor. A diffraction grating and real three‐dimensional coupled gear wheel created by TPA photopolymerization were described to demonstrate the unique capability of HPEA in microfabrications. Copyright © 2004 John Wiley & Sons, Ltd.     

Photoinitiators with functional groups. V. New water‐soluble photoinitiators containing carbohydrate residues and copolymerizable derivatives thereof

The synthesis of new water‐soluble photoinitiators (PIs) based on hydroxyalkylphenones, benzophenones, and thioxanthones with carbohydrate residues such as glucose, cellobiose, and 1‐amino‐1‐deoxy‐D ‐glucitol (glucamine) is described. In addition, selected initiators were reacted with methacryloyl chloride to obtain copolymerizable initiators with improved migration stability. Results from photo differential scanning calorimetry and gel‐content measurements in commercially available water‐thinnable and emulsion‐type resins as well as 2‐hydroxyethyl acrylate are included. Glucose‐modified PIs gave the best results with respect to compatibility with the resin, reactivity, and gel content. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1504–1518, 2002     

Intermolecular hydroamination of vinyl arenes using tungstophosphoric acid as a simple and efficient catalyst

The intermolecular hydroamination of vinyl arene derivatives has been efficiently carried out using a tungstophosphoric acid (TPA) catalyst under solvent free and mild reaction conditions. The present protocol provides an environmentally benign, easy to handle and highly active solid acid catalyst for hydroamination of vinyl arenes. The catalyst yields both hydroamination and hydroarylation products and the selectivity mostly depends on the reaction conditions.     

Development in the area of UV-crosslinkable solvent-based pressure-sensitive adhesives with excellent shrinkage resistance

Solvent-based UV-crosslinkable pressure-sensitive adhesives (PSA) present a new class of products that offers the potential to produce a novel generation of ultraviolet cured self-adhesive products with excellent shrinkage resistance. A variety of solvent-based pressure-sensitive adhesives were prepared by synthesis in ethyl acetate with solid content on 50 wt.% with 2-ethylhexyl acrylate, methyl acrylate, acrylic acid, N-vinyl caprolactam and unsaturated photoinitiators: 4-acryloyloxy benzophenone, allyl benzoine and phenyl-(1-acryloyloxy)-cyclohexyl ketone. The main emphasis is given to the influence of viscosity and molecular mass of synthesized adhesive on their shrinkage. Further trials show the effect of the UV-crosslinking process with UV-lamp and comparison with acrylics PSA crosslinked with metal chelates aluminium acetylacetonate and titanium acetylacetonate on shrinkage. Further examinations describe the influence of various factors such as UV exposure time and UV dose on very relevant PSA performance such as shrinkage on coated PVC carrier.     

Novel pyridinium salts as cationic thermal and photoinitiators and their photosensitization properties

Novel pyridinium salts [N‐(α‐phenylbenzyl)‐, N‐(1‐naphthylmethyl)‐, or N‐cinnamyl p‐ or o‐cyanopyridinium hexafluoroantimonates] were synthesized by the reaction of p‐ or o‐cyanopyridine and the corresponding bromides followed by anion exchange with KSbF₆. These pyridinium salts polymerized epoxy monomers at lower temperatures than previously reported for N‐benzyl‐2‐cyanopyridinium hexafluoroantimonate. The o‐substituted pyridinium salts showed higher activity than the p‐substituted ones, and the crosslinked epoxy polymers cured with these initiators showed higher glass‐transition temperatures. These pyridinium salts photoinitiated radical polymerization as well as cationic polymerization. The photopolymerization was accelerated by the addition of aromatic ketones as photosensitizers. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 1037–1046, 2002     

Development of new high‐performance visible light photoinitiators based on carbazole scaffold and their applications in 3d printing and photocomposite synthesis

In this article, new compounds based on the carbazole scaffold (DMs = DM1 and DM2, constituted by a carbazole unit connected on positions 3 and 6 to a two 4,4′‐dimethoxydiphenylamine groups and differing by the substituent present on the nitrogen heteroatom of the carbazole core) were synthesized and proposed as high‐performance visible light photoinitiators/photosensitizers for both the free‐radical polymerization of methacrylates and the cationic polymerization of epoxides upon visible light exposure using LED@405 nm. Remarkably, DM2 leads to higher final conversions than DM1. In order to study the photophysical and photochemical properties of the carbazole derivatives, different parameters were taken into account such as the light absorption, the steady‐state photolysis, and the fluorescence spectroscopy. Using different techniques such as fluorescence quenching, redox behavior, and cyclic voltammetry, we are able to discuss the photosensitization/photoinitiation reactions providing a full coherent picture of the involved chemical mechanisms. The photosensitization of the carbazole derivatives occurred predominantly via singlet excited states at the rate of the diffusion limit. Upon exposure to laser diode at 405 nm, DMs show high performance in initiating systems for 3D resins. Remarkably, DM2 can also be used in photocomposite synthesis using light‐emitting diode conveyor. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 2081–2092     

Effect of Polymerizable Photoinitiators on the UV‐polymerization behaviors of photosensitive polysiloxane

In this contribution, three polymerizable benzophenone photoinitiators containing maleimide group including 4‐maleimidebenzophenone (MBP), 4‐chlorine‐4′‐maleimide benzophenone (CMBP), and 4‐maleimide‐4′‐[(4‐maleimide)thiophenyl]benzophenone (MMTBP) were designed and synthesized to enhance the polymerization degree of photosensitive polysiloxane containing methacryloxy active groups (MAPSO). The polymerization behaviors of the MAPSO cured by different photoinitiators were investigated using Fourier transform infrared (FTIR). It was noted that the MAPSO initiated by MMTBP showed a high carbon–carbon double bond conversion above 80% because of the existence of thiophenyl group which could generate more radicals from the photolysis reaction at the C? S bond. In addition, the thermal stability of the UV‐cured MAPSO were studied by thermogravimetric analysis (TGA), the result showed that the initial 5% mass loss (T _5%) and residual weight percent at 800 °C in nitrogen of the UV‐cured MAPSO initiated by MMTBP systems was 200 °C and 33.8%. Thus, this work provides a new perspective and efficient strategy to improve the polymerization degree of UV‐curable polysiloxanes with carbon–carbon double bonds. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1696–1705     

Dephosphorylation of intact glycoprotein to greatly improve digestion efficiency coupled with matrix-assisted laser desorption/ionization–Fourier transform ion cyclotron resonance mass spectrometric analysis

Sialylation is essential for a variety of cellular functions. Herein, we used bovine fetuin with three potential N-linked glycosylation sites containing complex-type glycan structures, four potential O-linked glycosylation sites and six potential phosphorylation sites as a model compound to develop a highly-efficient digestion strategy for sialylated glycoproteins and efficient enrichment strategy for sialylated glycopeptides using titanium dioxide. The former according to the process of alkaline phosphatase digestion followed by tryptic digestion and then proteinase K digestion could greatly improve the enzymatic efficiency on fetuin, and the latter could obviously enhance the enrichment efficiency for multisialylated glycopeptides using phosphoric acid solution as elution buffer. The mass spectra of the enriched glycopeptides derived from fetuin reveal that several series of the ion clusters with mass difference of 291 Da correspond to the presence of multisialylated glycopeptides. In addition, the approach was applied to characterize the sialylated status of α2-macroglobulin and transferrin, respectively, from the sera of healthy subjects and sex- and age-matched patients with thyroid cancer, and their spectra indicate that the change in the amount of the glycoforms containing different number of sialic acid (SA) residues from one glycosylation site may be used to differentiate between healthy subjects and cancer cases.