Revealing the Effect of Surface Composition on Multiwalled Carbon Nanotubes Supported Pt-Fe Alloy Electrocatalysts for Methanol Oxidation Performance

The designs of efficient and inexpensive Pt-based catalysts for methanol oxidation reaction (MOR) are essential to boost the commercialization of direct methanol fuel cells. Here, the highly catalytic performance PtFe alloys supported on multiwalled carbon nanotubes (MWCNTs) decorating nitrogen-doped carbon (NC) have been successfully prepared via co-engineering of the surface composition and electronic structure. The Pt₁Fe₃@NC/MWCNTs catalyst with moderate Fe³⁺ feeding content (0.86 mA/mg_Pt) exhibits 2.26-fold enhancement in MOR mass activity compared to pristine Pt/C catalyst (0.38 mA/mg_Pt). Furthermore, the CO oxidation initial potential of Pt₁Fe₃@NC/MWCNTs catalyst is lower relative to Pt/C catalyst (0.71 V and 0.80 V). Benefited from the optimal surface compositions, the anti-corrosion ability of MWCNT, strong electron interaction between PtFe alloys and MWCNTs and the N-doped carbon (NC) layer, the Pt₁Fe₃@NC/MWCNTs catalyst presents an improved MOR performance and anti-CO poisoning ability. This study would open up new perspective for designing efficient electrocatalysts for the DMFCs field.     

超临界流体色谱流程设计及其应用

本文设计了多功能超临界流体色谱流程,流程中包括毛细管/微填充柱SFC,GC,计算机控制温度、压力、密度及信号采集、处理,配置有超临界流体萃取池,解决了超临界流体色谱分流口易堵问题。利用该流程,将石腊、DC-200气相色谱固定相、黄油、蜂蜡、救心油、红花油等样品进行超临界流体色谱分离。     

Selectivity changes towards steroids in packed column supercritical fluid chromatography (SFC) induced by temperature and pressure variation

Summary Pressure/temperature variation in SFC was shown to influence selectivity towards steroids. Major changes were observed for polar column packings compared to non-polar packings and variation of the amount of modifier showed that this is valid over the whole investigated range. The effect is underlined by a fall in resolution in the low density range (low pressure/high temperature) for polar stationary phases and appears to be significantly larger than for non-polar phases. Major selectivity shifts induced by variation of the physical properties of the mobile phase are considered to be due to the greater effect of polar modifiers on the nature of polar stationary phases than on non-polar phases.     

Supercritical CO2 as a superior solvent for the cyclization of diallylmalonate catalyzed by palladium-containing zeolites

Palladium-containing zeolites catalyze the cycloisomerization of diethyl diallylmalonate to dimethylcyclopentenes. When the reaction is carried out in toluene, the performance of the palladium catalyst depends on the pore size of the zeolites. At 60 °C, palladium adsorbed on large pore size Beta zeolite (pore size ∼7.4 Å) is more active than medium pore size ZSM-5 (pore size ∼5.4 Å). This lower activity of ZSM-5 compared to Beta is attributable to the restricted diffusion of reagent and products through the ZSM-5 channels as compared to Beta zeolite. However, due to the gas-like diffusion characteristic of the supercritical state, the activity of ZSM-5 increases and becomes identical to that of Beta zeolite using supercritical CO₂ as medium.     

Lithium heptadecafluorooctanesulfonate catalyzed Mannich-type and aza-Diels-Alder reactions in supercritical carbon dioxide

The Mannich-type reaction of imines with (1-methoxy-2-methylpropenyloxy)trimethylsilane and aza-Diels-Alder reaction of imines with Danishefsky's diene can be carried out in scCO₂ in the presence of lithium heptadecafluorooctanesulfonate which offer a way to synthesize β-amino carbonyl compounds and nitrogen-containing six-membered ring compounds under environmentally benign conditions.     

Vapor-liquid equilibrium data at 25°C for six binary systems containing methyl acetate or methanol,with dichloromethane,chloroform, or 1,2-trans-dichloroethylene

Isothermal vapor-liquid equilibrium (VLE) data, at 25° C were determined by a saturation method for each of the six methanol or methyl acetate binary systems with dichloromethane, chloroform, and 1,2-trans-dichloroethylene. The experimental data satisfy the Redlich-Kister consistency test, and were correlated with five Gibbs free energy models. All the binary mixtures of methanol with the chlorinated compounds exhibit strong positive deviations from ideality while the mixtures of methyl acetate with the chlorinated compounds present negative deviations from ideal behavior.Communicated at the Festsymposium celebrating Dr. Henry V. Kehiaian's 60^th birthday, Clermont-Ferrand, France, 17–18 May 1990.     

Investigation on hexamethyldisilazane vapor treatment of plasma-damaged nanoporous organosilicate films

Hexamethyldisilazane (HMDS) vapor treatment of plasma-damaged nanoporous organosilicate thin films has been studied as a function of treatment temperature in this work. Although, the HMDS vapor treatment facilitated incorporation of methyl (CH₃) groups subsequent to the removal of free hydroxyl (OH) groups in the damaged films at treatment temperature as low as 55 °C, the bonded OH groups were not removed. More significantly, detailed analysis of the results reveals that HMDS vapor modified only the surface of the plasma-damaged samples and not the entire film as expected. This is attributed to the formation of a thin solid layer on the surface, which effectively prevents penetration of HMDS vapors into the bulk. The Fourier transform-infrared (FT-IR) absorption and dielectric constant measurements confirm that the vapor treatment assists only partial curing of the plasma-damaged films. Alternative processes of curing the films with HMDS dissolved in supercritical carbon dioxide (SCCO₂) as a medium of reaction in static and pulsed modes were also attempted and the results are presented in this paper.     

Assignments of methanol laser lines by frequency measurements and Fourier transform spectroscopy

We have measured the frequencies of four CH₃OH far-infrared laser lines that were previously known only by wavelength measurement. Two of these lines turned out to be doublets, bringing the total number of measured lines to six. We can now confirm the assignments of five of them and definitely disprove the assignments proposed for the sixth.In particular we confirm the assignments for the four strong laser lines at 205 and 208 µm pumped by the 9-P(34) CO₂ laser line. These lines share a common upper level in the first excited CO-stretch state, and terminate in the upper and lower levels of a hybrid state with J=5. Heterodyne frequency measurements and conventional microwave spectroscopy show that both lines are split into two components approximately 3.5 MHz apart. The origin of this further splitting is interpreted as a perturbed K-splitting.Work supported by Consiglio Nazionale delle Ricerche -Italia     

Synthesis of cellulose carbamate by supercritical CO2-assisted impregnation: Structure and rheological properties

Cellulose carbamate, an environmentally friendly material presents an interesting alternative to petroleum-based polymers because of its renewable, biodegradable, biocompatible nature and its solubility in conventional solvents. In synthesis process of cellulose carbamate, urea was firstly impregnated into the cellulose pulp by supercritical CO₂(scCO₂), followed by the esterification of cellulose. The structure of cellulose carbamate was characterized by Fourier transform infrared spectroscopy (FTIR), X-ray diffractometry (XRD) and scanning electron microscopy (SEM). The rheological properties of these cellulose carbamates in 9% sodium hydroxide solution were investigated, using a range of the nitrogen content, concentrations and shear rates.