Khillah extract as inhibitor for acid corrosion of SX 316 steel

The inhibitive effect of the extract of khillah (Ammi visnaga) seeds, on the corrosion of SX 316 steel in HCl solution was determined using weight loss measurements as well as potentiostatic technique. It was found that the presence of the extract reduces markedly the corrosion rate of steel in the acid solution. The inhibition efficiency increases as the extract concentration is increased. The inhibitive effect of khillah extract was discussed on the basis of adsorption of its components on the metal surface. Negative values were calculated for the energy of adsorption indicating the spontaneity of the adsorption process. The formation of insoluble complexes as a result of interaction between iron cations and khellin, which present in the extract, was also discussed.     

An estimation of the measurement uncertainty for an optical emission spectrometric method

 A validation procedure based on the ISO/IEC 17025 standard was used to demonstrate the long-term stability of a calibration process and to assess the measurement uncertainty of a standard test method for optical emission vacuum spectrometric analysis of carbon and low-alloy steel (ASTM E 415–99a). The validation was used to provide documented evidence that the selected method fulfils the requirements and that the method is ”fit for purpose”. A test for drift was applied to determine statistically whether the analytical results vary systematically with time. The accuracy and traceability of the optimised method were tested by an analysis of closely matched matrix certified reference materials (CRMs). The measurement uncertainty estimations took account of the precision study, the bias and its uncertainty, and the qualification of uncertainties not considered in the overall performance studies. Received: 2 November 2002 Accepted: 2 January 2003 Acknowledgement The author expresses gratitude to Dr. Aleš Fajgelj for helpful discussions during the 3rd Central European Conference on Reference Materials and Measurements. Presented at CERMM-3, Central European Reference Materials and Measurements Conference: The function of reference materials in the measurement process, May 30–June 1, 2002, Rogaška Slatina, Slovenia Correspondence to T. Drglin     

钢球质量监测最佳抽检方案的确定

本文介绍概率抽样法在钢球生产过程中的应用,通过此法确定钢球生产中各工序质量监测的最佳抽检方案,以确保产品被接受的概率最大。     

Application of thermal analysis to study smelting reduction kinetics

A thermal analysis study on the reduction of iron oxide rich slags under different conditions is presented in this paper. The effects of important process variables such as time, temperature, lime-silica ratio, FeO level in slag etc. are discussed. It is shown that the mechanism of reduction by externally added graphite is different from that by a carbon saturated bath although the activation energy values are similar.     

Coulometric argentometric determination of microamounts of sulphur in iron and steel after reduction to hydrogen sulphide with iron(II) in strong phosphoric acid medium

A coulometric method was developed for the determination of microamounts of sulphur in iron and steel. Hydrogen sulphide is quantitatively evolved by reduction with iron(II) in strong phosphoric acid medium and is titrated with electrolytically generated silver ion from a silver anode. Microamounts of sulphide (2.96–224.3 μg) in sodium sulphide standard solutions could be determined with an error of only a few percent. Sulphur in a potassium sulphate standard solution is quantitatively reduced to hydrogen sulphide and could be separated from the solution by heating and determined accurately. Trace amounts of sulphur (7–100 μg g^?1) in iron and steels could be determined with a standard deviation of 0.7–2.1 μg g^?1.     

The way to measure quantitatively full dissolution and crystallization of polyamides in water up to 200 °C and above by DSC

The way to measure quantitatively full dissolution and crystallization of polyamides in water up to 200 °C and above by DSC is described. Stainless-steel high-pressure pans enable research on fully dissolving polyamides in water under vapor pressure. The results show clearly that polyamide 6 (PA6) is soluble in water under vapor pressure in the whole concentration range and that water acts as a crystallization and melting point suppressor. The maximum temperature depression is approximately 60 °C. This depression of the transitions is independent of concentration over a large range (10-70 mass% PA6 in water). When PA6 dissolves in water during heating, the polymer often sets to the sides of the DSC sample pan. Because of this the contact between the sample and the bottom of the pan reduces during measurement and therefore DSC heating curves are frequently curved. Adding steel wool to these stainless-steel high-pressure pans improves the measurements by increasing the thermal conductivity between the sample and pan bottom, and as a result the DSC curves become less curved. The interpretation of the measurements improves and the possibility of reproducible peak area calculations also in heating comes in sight.     

Design and Application of a Set of Vitreous Standards for EDS-SEM Microanalysis of Melting Shop Slags

Non-metallic inclusions in steel are formed due to interactions between liquid steel and its environment in the melting shop (refractories and slags). Particles not trapped in the slag remain in the cast steel, impairing steel properties in service. Inclusion composition varies and certified standards covering the whole compositional range are unavailable.The present study describes the preparation of a set of homogeneous, glassy and crystalline standards with a wide compositional range for use in analysing non-metallic steel inclusions. For this, materials were designed based on knowledge of the compositional range of interest in the Al₂O₃–SiO₂–CaO–MgO–CaF₂ system, which is the matrix of the most frequent steel inclusions. The composition and microstructural homogeneity of the reference materials was verified.     

Synthese de Nouveaux Derives Phosphones a Chaine Perfluoree et Leurs Proprietes Adhesives Sur Acier

Ce mémoire décrit la synthèse de phosphonates comportant une chaîne perfluorée. Ces composés sont obtenus par la télomérisation d'allylphosphonates de dialkyle en présence d'un agent de transfert fluoré de type mercaptan. Ensuite, nous employons deux méthodes de déalkylation menant sélectivement soit au monoacide soit au diacide phosphonique. Tous ces produits comprenant une extrémité de chaîne phosphonée, sous forme acide ou ester, ont été caractérisés et leur adhésion respective sur des plaques d'acier est étudiée. Ces tests montrent que le monoacide phosphonique est un excellent promoteur d'adhésion et qu'il est aussi efficace que le diacide. This article describes the synthesis of phosphonic derivatives bearing a perfluorinated chain. These compounds have been synthetized by telomerization of dialkyl allylphosphonate with a fluorinated transfer agent type mercaptan. Then two methods of dealkylation leading selectively were used to mono or to diacid phosphonic moieties. All the products bearing phosphonic end-groups, more or less acidic, have been characterized and their own adhesion on steel plates is studied. These tests show that phosphonic monoacid is an excellent adhesion promoter on steel, as efficient as the diacid compound.     

Ash and Slag Waste as a Secondary Raw Material

In the process of industrial corporation activities a lot of waste, which pollutes the atmosphere, is generated, for example ash and slag. In Tomsk region, by estimates, ash stores occupy about 600 hectares, which contain about 25 million tons by weight. In Russian thermal power-stations ash disposal areas there are about 1.3 billion tons of ash, and only 10% of it is used. That is why this problem is topical enough. In this paper the scheme of producing ash ceramic bricks and complex ash and slag waste processing is shown. Besides, profitability of the project is presented.     

Fire retarded polyurethane foam composites based on steel slag/ammonium polyphosphate system: A novel strategy for utilization of metallurgical solid waste

A series of FR-RPUF composites were prepared by a one-step water foaming process with ammonium polyphosphate (APP) and steel slag (SS) as flame retardants. Thermogravimetric analysis (TG), limiting oxygen index (LOI), UL-94 vertical combustion test, microscale combustion calorimetry (MCC), TG-Fourier transform infrared spectrometry (TG-FTIR), scanning electron microscopy (SEM), Raman spectra and FTIR were used to investigate the thermal stability, flame retardancy, combustion performance, gas phase products, and char residue morphology of FR-RPUF composites. TG test results showed that the initial decomposition temperature (T_-5wt%) and char residue rate at 700°C of RPUF/APP/SS composites were significantly enhanced by the addition of APP and SS, and the thermal stability of the composites was improved. Flame retardant test results confirmed the significantly increased LOI values of RPUF/APP/SS composites with V-0 rating. TG-FTIR also confirmed the obviously decreased release of toxic gases and flammable gases in the combustion of RPUF/APP/SS composites. SEM and Raman spectra of char residues for the composites suggested that APP/SS system improved the compactness and graphitization degree of char layer for RPUF/APP/SS composite. The above researches provide a new strategy for the utilization of SS in fire safety engineering.