Prediction of aqueous solubility of drugs and pesticides with COSMO-RS

The COSMO-RS method, originally developed for the prediction of liquid-liquid and liquid-vapor equilibrium constants based on quantum chemical calculations, has been extended to solid compounds by addition of a heuristic expression for the Gibbs free energy of fusion. By this addition, COSMO-RS is now capable of a priori prediction of aqueous solubilities of a wide range of typical neutral drug and pesticide compounds. Only three parameters in the heuristic expression have been fitted on a data set of 150 drug-like compounds. On these data an rms deviation of 0.66 log-units was achieved. Later, the model was tested on a set of 107 pesticides, which have been critically selected based on two experimental data sources and by a crosscheck with an independent HQSAR model. On this data set an rms of 0.61 log-units was achieved, without any adjustments to the structurally extremely diverse pesticides. This result verifies the ability of this extended COSMO-RS to predict aqueous solubilities of drugs and pesticides of almost arbitrary structural classes. The new method is COSMO-RSol.     

Low-temperature bath/coupled-capillary/sweeping-micellar electrokinetic capillary chromatography for the separation of naphthalene-2,3-dicarboxaldehyde-derivatized dopamine and norepinephrine

The use of a low-temperature (0 degrees C) bath-assisted coupled capillary for the separation of naphthalene-2,3-dicarboxaldehyde (NDA)-derivatized dopamine and norepinephrine using the sweeping-micellar electrokinetic capillary chromatography (MEKC) mode is described. In this technique, a capillary consisting of two portions with different inside diameters is used. Therefore, the field strength inside the capillary is different. Hence, the electrophoretic migration velocities of the analytes and the electro-osmotic flow (EOF) also are different. Furthermore, when a portion of the capillary (wide portion, used for sweeping) is immersed in a low-temperature bath, the viscosity of the buffer and the retention factor of the analytes inside are increased. Thus, not only are the interactions between the SDS micelles and the analytes increased, but the SDS-analytes also move more slowly. As a result, a more complete separation can be achieved, even when the sample injection volume is large, up to approximately 2 microL. In general, when the volume of an injected sample is larger, the effects of sweeping and separation would become insufficient, especially when the retention values (k) of the analytes are quite different. However, this limitation can be improved when the low-temperature bath/coupled capillary/sweeping-MEKC mode is used.     

Simultaneous Determination of Aluminum and Iron in High Salt Content Matrices by Adsorptive Stripping Voltammetry. Application to Dialysis Fluids

A new analytical procedure for the simultaneous determination of aluminum(III) and iron(II) in two kinds of dialysis fluids (peritoneal and hemodialysis fluids) by differential pulse adsorptive stripping voltammetry (DPAdSV) is described. The voltammetric measurements were performed using, as working electrode, a stationary mercury electrode, and a platinum electrode and a Ag|AgCl|KCl_(sat.) electrode as auxiliary and reference electrodes, respectively, employing acetate buffer solutions at different pH as supporting electrolyte. As complexing agents, Solochrome Violet RS, Palatine Chrome Black 6BN, Chromazurol S and Eriochrome Black T were employed. For both elements, the accuracy, expressed as relative recovery R%, was very satisfactory being in the range 94–105%, the precision as repeatability, expressed as relative standard deviation s_r%, was lower than 6%, while the limits of detection were of the order of a few units of μg/L. The analytical voltammetric procedure has been validated by comparison with spectroscopic (graphite furnace atomic absorption spectroscopy, GFAAS) measurements.     

Comparison of the fragility index of different eudragit polymers determined by activation enthalpies

The present study aimed to apply fragility index (m) of polymers in the determination of the optimal amount of plasticizer in polymer films. The fragility index of different Eudragit polymers (RS, RL, EPO) was assessed by differential scanning calorimerty (DSC), applying the Arrhenius connection (logq–1/T _g). The fragility of Eudragit EPO films proved to be the highest, while in the case of RS and RL, the increase of the alkyl-chain length caused the increase of fragility. Studying the effect of plasticizer (triethyl citrate, TEC) on the m value of Eudragit RL and RS films, a near linear reduction of the fragility index could be observed between 5–30% TEC concentration, but above 30%, this value leveled out to constant.     

High‐performance liquid chromatographic enantioseparation of (RS)‐bupropion using isothiocyanate‐based chiral derivatizing reagents

A high‐performance liquid chromatographic (HPLC) method for enantioseparation of bupropion was developed using two isothiocyanate‐based chiral derivatizing reagents, (S)‐1‐(1‐naphthyl) ethyl isothiocyanate, (S)‐NEIT, and (R)‐α‐methyl benzyl isothiocyanate, (R)‐MBIT. The diastereomers synthesized with (S)‐NEIT were enantioseparated by reversed‐phase HPLC using gradient elution with mobile phase containing water and acetonitrile, whereas diastereomers synthesized with (R)‐MBIT were enantioseparated using triethyl amine phosphate buffer and methanol. Derivatization conditions were optimized and the method was validated for accuracy, precision and limit of detection. The limit of detection was found to be 0.040–0.043 µg/mL for each of the diastereomers prepared with (S)‐NEIT. Copyright © 2013 John Wiley & Sons, Ltd.     

Highly Sensitive AdSV Method for Fe(III) Determination in Presence of Solochrome Violet RS on Renewable Amalgam Film Electrode

The new DP AdSV method for high sensitive Fe(III) determination in the presence of Solochrome Violet RS was developed. The use of an innovative renewable amalgam film electrode Hg(Ag)FE allowed to obtain high sensitivity and significantly minimize the mercury consumption. The best results were obtained for surface area of Hg(Ag)FE equal to 11.8 mm². Instrumental parameters were optimized. The optimal results were obtained using differential pulse technique for the following values: sampling and waiting time ts=tw=10 ms, step potential Es=5 mV, pulse amplitude ΔE=50 mV. Measurements were conducted in 0.05 M acetate buffer (pH 5.6), the concentration of SVRS was equal to 5 μM. Deposition step was carried out at the potential ?400 mV for 20 s. Calculated detection limit for 40 s preconcentration time was equal to 1.4 nM (78 ng L^?1). The influence of the common in environment, organic and inorganic interferences was studied. The developed method for Fe(III) determination was successfully applied and validated by investigation of certified reference material SPS‐SW2 Batch 118 and recovery of Fe(III) from various spiked samples as snow, tap water and bottom sediments. The repeatability (for 50 nM of Fe(III)) of the developed method expressed as CV was equal 3.1 % (n=5).     

Application of Non-Destructive X-Ray Fluorescence Spectrometry to the Analysis of Suspended Matter in Sea Water

Abstract

In the framework of remote sensing studies concerning coastal transport of pollution in the Northern Adriatic Sea, a method has been developed for the quantitative determination of sulphur, iron, titanium, calcium, phosphorus, silicon, aluminium, magnesium in suspended matter of sea water.

The suspended material was collected by filtering on millipore membrane filters with pore width of 0.45 μ and directly analysed by X-ray spectroscopy. For calibration dried solution and particulate standard samples were used. Limits of sensitivity and precision of the method are reported.

Correlations between the concentration of these elements and the total suspended matter/chlorophyll are discussed.

The aim is to study the geochemical composition of particulate matter and its variations within the geographical site of the sea basin and the seasonal conditions. The approach is to consider aluminium and the other elements normalized on Al. On the basis of a matrix correlation analyses of some sets of data chosen in the restricted area for investigation, some hypothesis on superficial distribution of clay, carbonate, iron hydrous oxides and other mineral detrites, are taken into account. The results confirm the complex situation existing in the offshore area of the Venice lagoon from a geochemical point of view.

The suspended matter seem to be argillaceous in the Southern part of the investigated area and semi-argillaceous with hydrous oxides and carbonates in the Northern part which is influenced by the Piave river.     

结晶紫在纳米磷化镓粉体表面吸附的表面增强拉曼光谱分析

利用Raman光谱对结晶紫(Crystal Violet,CV)在纳米磷化镓(GaP)粉体表面的吸附状态进行了分析.结果表明:与普通拉曼散射谱(Normal Raman Scattering,NRS)相比,结晶紫表面增强拉曼散射(Surface Enhanced Raman Scattering,SERS)谱的4种振动模式,即:中央键的呼吸振动、环-C -环面外弯曲振动、环C-H面外弯曲振动以及N-环伸缩振动,在纳米GaP粉体表面得到增强;通过分析吸附前后结晶紫拉曼散射峰相对强度的变化,确定了结晶紫在纳米GaP粉体表面的吸附取向,并对其表面增强散射机理进行了探讨.     

集值映射的 RS集逼近

本文研究了取值为 Banach空间中子集的上半连续的集值映射的 RS集逼近问题 ,给出了集值映 射用 RS集逼近的特征和唯一性结果 ,从而推广了他人的结果 .