Preparation and characterization of finely dispersed drugs. 5. Ethyl 3,5-di(acetylamino)-2,4,6-triiodobenzoate

Controlled precipitation of the diagnostic imaging agent ethyl 3,5-di(acetylamino)-2,4,6-triiodobenzoate has been used to produce fine particles of various sizes, morphologies, and degrees of crystallinity, which depended on experimental conditions. In addition, two distinct polymorphic forms of the drug have been fully characterized by single crystal X-ray diffraction studies, and evidence for a third polymorph was also observed. Some of the so prepared dry particles were coated with a thin layer of silica.     

Preparation and properties of homogeneous V2O5-SiO2 xerogel composite based on interpenetrating polymer network

In this paper, we report the conducting and electrochemical properties of a homogeneous V₂O₅-SiO₂ xerogel composite obtained from the simultaneous polymerization in both inorganic components (Si-O and V-O based polymers) forming an interpenetrating polymer network, where a mutual “solubility” due to cross-links and entanglements was observed. The presence of V₂O₅ inside the silica matrix has a strong effect on electrical conductivity; measurements showed room temperature conductivity almost 1000 times higher than what is found in the literature. In addition, the electrochemical behavior is quite similar to that found in V₂O₅ xerogel. Moreover, the effects of thermal treatment on the conducting and electrochemical properties were investigated. It was found that both properties were improved with no significant effect on V₂O₅ xerogel layered structure.     

Magnetic silica colloids for catalysis

Monodisperse magnetizable colloidal silica particles in a stable dispersion have been functionalized with a homogeneous catalyst: a PCP–pincer Pd-complex. In a proof-of-principle experiment we demonstrate the catalytic activity of the colloids in a C–C bond formation reaction. Advantages of the magnetic silica carriers are the large surface-to-volume ratio and the easy recovery by magnetic separation. After magnetic separation, the catalyst-loaded particles are readily redispersed for further use.     

高效液相色谱法所用大孔硅胶填料的制备

对国产ＧＹＱＧ球形硅胶施加高压水热处理并进行扩孔，制备了用于高效液相色谱法的大孔硅胶填料，考察了扩孔压力，扩孔温度和扩孔时间对平均孔径和比表面积的影响。并将产品日本ＳＩＬ－３００３×１０＾－８ｍ硅胶进行了物理性质和孔分布的对比实验，结果表明ＧＹＱＧ硅胶扩孔后平均孔径为２０～３０ｎｍ接近日本ＳＩＬ－３００３×１０＾－８ｍ硅前平平均孔径２５ｎｍ。display structure     

Phase Analysis of the Binary System of Cryolite (Na3AlF6) and Sodium Metasilicate (Na2SiO3)

The phase analysis of cryolite (Na₃AlF₆) and sodium metasilicate (Na₂SiO₃) was performed by thermal analysis. The eutectic system with a region of two immiscible substances at a concentration of Na₂SiO₃ between 42.8 and 46.3 mol‐% was identified and the eutectic temperature determined to (886±2) °C. Based on the results of mass‐loss measurements, it was assumed that the introduced Na₂SiO₃ reacts with Na₃AlF₆ due to the formation of some nonvolatile stable compounds. The stable reaction products were identified by X‐ray diffraction analysis and IR spectroscopy of the spontaneously cooled samples, which established the formation of NaF and stable amorphous aluminosilicate compounds.     

On Aging of Acid-Catalyzed Silica Sols—A Dynamic Light Scattering Study

Dynamic light scattering experiments in acid-catalyzed silica sols are discussed. It is shown that in spite of limited parameter accuracy and limited absolute knowledge of the particle sizes, the scattering data from various experiments are comparable with one another and give information about structural differences. Measurements at various angles indicate changes between non-spherical and nearly spherical particles and allow the estimation of gelling times before gelation.     

Preparation of complex carbon-silica adsorbents with different properties

Summary The surface properties of complex adsorbents prepared through the pyrolysis of benzyl and n-heptyl alcohols and their mixtures on the surface of silica gel were investigated. The reactions were carried out in an autoclave at 500°C. A series of adsorbents having different porous structure, chemical nature of the adsorption centers and their topography were obtained. The best resolution of different mixtures was obtained by the carbon-silica adsorbent prepared through the pyrolysis of n-heptanol.     

醋酸十二铵的吸附和SiO2悬浮液的稳定性

（1）测定了醋酸十二烷基铵（DAA）在CAB－O－SIL上的吸附，其等温线属双平台或LS型[1－3，5]；（2）NaCl的存在使DAA的吸附增加．但不影响其低浓度下第一平台的吸附量；HCl的存在则在全浓度范围内抑制了DAA的吸附，（3）测定了CAB－O－SIL颗粒在上述各溶液中的悬浮液的稳定性；（4）根据表面形成小胶团的吸附理论（即二步模型产）[2，3，5，]，并借助电导跟踪溶液中发生的变化，满意地解释了吸附和聚沉的实验结果．     

Effect of silica-type sol-gel carrier’s structure and morphology on a supported Ziegler-Natta catalyst for ethylene polymerization

Silica xerogels with different structures and morphology, synthesized using a sol-gel procedure, were used as a carrier of vanadium catalysts (VOCl₃/AlEt₂Cl) for ethylene polymerization. Two techniques of catalyst synthesis were applied: slurry impregnation and gas-phase adsorption and the relevant polymerization methods were then employed. The effect of the carrier structure and morphology on the vanadium loading in the catalysts, the catalyst’s activity and kinetic stability were investigated.     

Colloid stability of electrostatically stabilized sols

 The dependence of the stability of SiO₂ and Al₂O₃ sols on the pH of their medium has been studied. Vapor adsorption isotherms on powders were prepared from acidic and basic sols, the immersion enthalpy (heat) of samples containing preadsorbed water have been determined and, also, the reversibility of the sol ⇌ xerogel transformation, i.e. the peptizability of the powders, has been investigated. Based on the flocculation values determined with KCl, the sols have been classified into three groups. The stability of highly hydrophilic sols (acidic SiO₂- and Al₂O₃-sols) is ensured by a thick continuous diffuse lyosphere formed around the particles, as the continuity principle by Ostwald–Buzágh suggests. In this case, no electric charge is needed for ensuring stability. These sols are thermodynamically stable (group 1). Sols with medium stability are stabilized by the electrical double layer around the particles and by 1–2 layers of adsorbed water. The flocculation value of these sols is determined by the electrostatic interaction, whereas the peptizability of the flocs is related to formation of water layers. Such sols are the basic SiO₂- and Al₂O₃-sols (group 2). Sols of low stability are of hydrophobic nature. Their flocculation value with 1:1 electrolytes is smaller than 0.1 molkg^-1. The transformation process sol ⇒ floccule ⇒ xerogel is mostly irreversible. There are a lot of such sols (group 3). The existence of a hydrosphere is proved by the almost identical value of the hydration energy for both the acidic and the basic SiO₂ sols, in spite of an order of magnitude difference in the flocculation value. The remnants of adsorbed water after drying hinders sintering of the particles and ensures the peptizability of powders. The highly hydrophilic sols (sequence of hydrophilicity: SiO₂> Al₂O₃>FeO OH ⋅ 0.5 H₂O) are all oxides which are formed in acidic media. Received: 25 May 1997 Accepted: 13 October 1997