Particle-size distribution of polycyclic aromatic hydrocarbons in urban air in southern Spain

The size distribution of polycyclic aromatic hydrocarbons (PAH) was determined for airborne particles from a large city with high vehicular traffic. The analytical method was optimised and validated using NIST standard reference material (SRM 1649a Urban Dust). The 16 priority PAH listed in the US-EPA were Soxhlet-extracted from filtered particulate matter and then fractionated using on-column chromatography. The aromatic fraction was quantified by gas chromatography-mass spectrometry. Real samples of particles collected in Seville (Spain) were analysed using the validated method. Values for the total concentration of PAH in the air, as well as the concentrations of each PAH in six particle-size ranges were obtained. Values of the PAH in TSP, PM₁₀, PM_2.5 and PM₁ were assessed.     

Determination of heterocyclic aromatic amines (HAA) in commercially available meat products and fish by high performance liquid chromatography—Electrospray tandem mass spectrometry (HPLC-ESI-MS-MS)

Summary Ten heterocyclic aromatic amines (HAA) (1)–(10) were analyzed in commercially available meat products and fish. After sample preparation by Extrelut treatment and subsequent solid phase extraction applying propylsulphonic and C₁₈ silica cartridges, HPLC-ESI-MS-MS using selected reaction monitoring (SRM) and d₃-PhIP and d₃-MeIQx as internal and external standards, respectively, revealed the widely distributed presence of PhIP (8) and MeIQx (4), ranging from 0.1 to 5.3 ng g⁻¹ and 0.1 to 5.2 ng g⁻¹, respectively. Lower amounts were found for 4,8-DiMeIQx (5) and 7,8-DiMeIQx (6), ranging from 0.2 to 2.0 ng g⁻¹ and 0.1 to 0.2 ng g⁻¹, respectively. The other HAA under study, i.e. IQ, MeIQ, 4,7,8-TriMeIQx, Glu-P-1, and Glu-P-2 were not determinable under the experimental conditions used (determination limit 0.1 ng g⁻¹).     

LC-MS Quantification of Site-Specific Phosphorylation Degree by Stable-Isotope Dimethyl Labeling Coupled with Phosphatase Dephosphorylation

Protein phosphorylation is a crucial post-translational modification that plays an important role in the regulation of cellular signaling processes. Site-specific quantitation of phosphorylation levels can help decipher the physiological functions of phosphorylation modifications under diverse physiological statuses. However, quantitative analysis of protein phosphorylation degrees is still a challenging task due to its dynamic nature and the lack of an internal standard simultaneously available for the samples differently prepared for various phosphorylation extents. In this study, stable-isotope dimethyl labeling coupled with phosphatase dephosphorylation (DM + deP) was tried to determine the site-specific degrees of phosphorylation in proteins. Firstly, quantitation accuracy of the (DM + deP) approach was confirmed using synthetic peptides of various simulated phosphorylation degrees. Afterwards, it was applied to evaluate the phosphorylation stoichiometry of milk caseins. The phosphorylation degree of Ser130 on α-S1-casein was also validated by absolute quantification with the corresponding synthetic phosphorylated and nonphosphorylated peptides under a selected reaction monitoring (SRM) mode. Moreover, this (DM + deP) method was used to detect the phosphorylation degree change of Ser82 on the Hsp27 protein of HepG2 cells caused by tert-butyl hydroperoxide (t-BHP) treatment. The results showed that the absolute phosphorylation degree obtained from the (DM + deP) approach was comparable with the relative quantitation resulting from stable-isotope dimethyl labeling coupled with TiO₂ enrichment. This study suggested that the (DM + deP) approach is promising for absolute quantification of site-specific degrees of phosphorylation in proteins, and it may provide more convincing information than the relative quantification method.     

Ethylene propylene diene monomer rubber‐based heat shielding materials for solid rocket motor: Impact of Kevlar fiber reinforcement on the thermal and mechanical properties

This work scrutinizes the utilization of ethylene propylene diene monomer rubber matrix (EPDM) with an embodiment of aramid fiber for the heat shielding applications in solid rocket motor (SRM). Aramid fibers are aromatic poly‐paraphenylene terephthalamide, here deployed are Kevlar fibers (KF). However, the literature that encompasses the thermal and mechanical behavior with the fiber loading is reported nowhere else. The effect of fiber addition on the surface morphology and density was thoroughly studied, and it revealed that the EHSMs were of lower density to act as an efficient payload for the SRM. In this regard, the thermal conductivity, heat capacity, thermal diffusivity, fire behavior, and mechanical properties of the EPDM/KF‐based EHSMs were explored. The results revealed that the EHSMs are thermally insulating and thermally stable material with balanced mechanical properties that can engender the thermal and mechanical strains of the rocket motor. Furthermore, other analytical techniques such as scanning electron microscopy and energy dispersive X‐ray spectroscopy have been exploited to monitor the performance of the char residues of the EHSM to delineate its performance in the fire atmosphere.     

Optimization of the Physical,Optical and Mechanical Properties of Composite Edible Films of Gelatin,Whey Protein and Chitosan

The aim of this work was to evaluate the effect of the concentration of gelatin (G) (3–6 g), whey protein (W) (2.5–7.5 g) and chitosan (C) (0.5–2.5 g) on the physical, optical and mechanical properties of composite edible films (CEFs) using the response surface methodology (RSM), as well as optimizing the formulation for the packaging of foods. The results of the study were evaluated via first- and second-order multiple regression analysis to obtain the determination coefficient values with a good fit (R ˃ 0.90) for each of the response variables, except for the values of solubility and b*. The individual linear effect of the independent variables (the concentrations of gelatin, whey protein and chitosan) significantly affected (p ≤ 0.05) the water vapor permeability (WVP), strength and solubility of the edible films. The WVP of the edible films varied from 0.90 to 1.62 × 10⁻¹¹ g.m/Pa.s.m², the resistance to traction varied from 0.47 MPa to 3.03 MPa and the solubility varied from 51.06% to 87%. The optimized values indicated that the CEF prepared with a quantity of 4 g, 5 g and 3 g of gelatin, whey protein and chitosan, respectively, provided the CEF with a smooth, continuous and transparent surface, with L values that resulted in a light-yellow hue, a lower WVP, a maximum strength (resistance to traction) and a lower solubility. The results revealed that the optimized formulation of the CEF of G–W–C allowed a good validation of the prediction model and could be applied, in an effective manner, to the food packaging industry, which could help in mitigating the environmental issues associated with synthetic packaging materials.     

An overview of analytical methodologies for the determination of antibiotics in environmental waters

The widespread occurrence of antibiotics as contaminants in the aquatic environment has increased attention in the last years. The concern over the release of antibiotics into the environment is related primarily to the potential for the development of antimicrobial resistance among microorganisms. This article presents an overview of analytical methodologies for the determination of quinolone (Qs) and fluoroquinolone (FQs), macrolide (MLs), tetracycline (TCs), sulfonamide (SAs) antibiotics and trimethoprim (TMP) in different environmental waters. The analysis of these antibiotics has usually been carried out by high-performance liquid chromatography (HPLC) coupled to mass spectrometry (MS) or tandem mass spectrometry (MS/MS) and to a lesser extent by ultraviolet (UV) or fluorescence detection (FD). A very important step before LC analysis is sample preparation and extraction leading to elimination of interferences and prevention of matrix effect and preconcentration of target analytes.     

Characterization of Standard Reference Material 2942, Ce-ion-doped glass, spectral correction standard for UV fluorescence

Standard Reference Material (SRM) 2942 is a cuvette-shaped, Ce-ion-doped glass, recommended for use for relative spectral correction of emission from 320 to 430 nm and day-to-day performance verification of steady-state fluorescence spectrometers. Properties of this standard that influence its effective use or contribute to the uncertainty in its certified emission spectrum were explored here. These properties include its photostability, absorbance, dissolution rate in water, anisotropy and temperature coefficient of fluorescence intensity. The expanded uncertainties in the certified spectrum are about 9% around the peak maximum at 330 nm, using an excitation wavelength of 310 nm. The SRM also exhibits a strong resistance to photodegradation, with no measurable decrease in fluorescence intensity even after 25 h of irradiation with UV light>280 nm from a Xe lamp.     

A cost effective,sensitive, and environmentally friendly sample preparation method for determination of polycyclic aromatic hydrocarbons in solid samples

A simple, cost effective, and yet sensitive sample preparation technique was investigated for determining Polycyclic Aromatic Hydrocarbons (PAHs) in solid samples. The method comprises ultrasonic extraction, Stir Bar Sorptive Extraction (SBSE), and thermal desorption–gas chromatography–mass spectrometry to increase analytical capacity in laboratories. This method required no clean-up, satisfied PAHs recovery, and significantly advances cost performance over conventional extraction methods, such as Soxhlet and Microwave Assisted Extraction (MAE). This study evaluated three operational parameters for ultrasonic extraction: solvent composition, extraction time, and sample load. A standard material, SRM 1649 a (urban dust), was used as the solid sample matrix, and 12 priority PAHs on the US Environmental Protection Agency (US EPA) list were analyzed. Combination of non-polar and polar solvents ameliorated extraction efficiency. Acetone/hexane mixtures of 2:3 and 1:1 (v/v) gave the most satisfactory results: recoveries ranged from 63.3% to 122%. Single composition solvents (methanol, hexane, and dichloromethane) showed fewer recoveries. Comparing 20 min with 60 min sonication, longer sonication diminished extraction efficiencies in general. Furthermore, sample load became a critical factor in certain solvent systems, particularly MeOH. MAE was also compared to the ultrasonic extraction, and results determined that the 20-min ultrasonic extraction using acetone/hexane (2:3, v/v) was as potent as MAE. The SBSE method using 20 mL of 30% alcohol-fortified solution rendered a limit of detection ranging from 1.7 to 32 ng L⁻¹ and a limit of quantitation ranging from 5.8 to 110 ng L⁻¹ for the 16 US EPA PAHs.     

Tutorial review on validation of liquid chromatography–mass spectrometry methods: Part I

This is the part I of a tutorial review intending to give an overview of the state of the art of method validation in liquid chromatography mass spectrometry (LC–MS) and discuss specific issues that arise with MS (and MS/MS) detection in LC (as opposed to the “conventional” detectors). The Part I briefly introduces the principles of operation of LC–MS (emphasizing the aspects important from the validation point of view, in particular the ionization process and ionization suppression/enhancement); reviews the main validation guideline documents and discusses in detail the following performance parameters: selectivity/specificity/identity, ruggedness/robustness, limit of detection, limit of quantification, decision limit and detection capability. With every method performance characteristic its essence and terminology are addressed, the current status of treating it is reviewed and recommendations are given, how to determine it, specifically in the case of LC–MS methods.     

Determination of polycyclic aromatic hydrocarbons from ambient air particulate matter using a cold fiber solid phase microextraction gas chromatography-mass spectrometry method

Polycyclic aromatic hydrocarbons (PAH) from ambient air particulate matter (PM) were analyzed by a new method that utilized direct immersion (DI) and cold fiber (CF) SPME-GC/MS. Experimental design was used to optimize the conditions of extraction by DI-CF-SPME with a 100μm polydimethylsiloxane (PDMS) fiber. The optimal conditions included a 5min equilibration at 70°C time in an ultrasonic bath with an extraction time of 60min. The optimized method was validated by the analysis of a NIST standard reference material (SRM), 1649b urban dust. The results obtained were in good agreement with certified values. PAH recoveries for reference materials were between 88 and 98%, with a relative standard deviation ranging from 5 to 17%. Detection limits (LOD) varied from 0.02 to 1.16ng and the quantification limits (LOQ) varied from 0.05 to 3.86ng. The optimized and validated method was applied to the determination of PAH from real particulate matter (PM10) and total suspended particulate (TPS) samples collected on quartz fiber filters with high volume samplers.