表面接枝含氟苯乙烯共聚物的聚酯薄膜制备与表征

利用表面引发原子转移自由基聚合(SI-ATRP)在聚对苯二甲酸乙二醇酯(PET)薄膜表面接枝苯乙烯和4-氟苯乙烯的共聚物.研究不同反应时间和不同配比下接枝共聚物对聚酯薄膜表面组成、结构和性能的影响.通过傅利叶变换红外光谱仪(ATR/FTIR),X-射线光电子能谱仪(XPS),凝胶渗透色谱(GPC)和扫描电子显微镜(SEM)对接枝改性前后PET薄膜的表面组成,结构和形貌进行分析;利用接触角测试和表面能计算对比研究接枝改性前后PET薄膜的表面性能.结果表明反应时间和单体百分含量对接枝百分率及接触角有一定的影响,随着反应时间的增长,聚酯薄膜表面接枝百分率增大,接触角增加,表面自由能下降.     

A New Protocol for Ash Wood Modification: Synthesis of Hydrophobic and Antibacterial Brushes from the Wood Surface

The article presents the modification of ash wood via surface initiated activators regenerated by electron transfer atom transfer radical polymerization mediated by elemental silver (Ag⁰ SI-ARGET ATRP) at a diminished catalyst concentration. Ash wood is functionalized with poly(methyl methacrylate) (PMMA) and poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) to yield wood grafted with PMMA-b-PDMAEMA-Br copolymers with hydrophobic and antibacterial properties. Fourier transform infrared (FT-IR) spectroscopy confirmed the covalent incorporation of functional ATRP initiation sites and polymer chains into the wood structure. The polymerization kinetics was followed by the analysis of the polymer grown in solution from the sacrificial initiator by proton nuclear magnetic resonance (¹H NMR) and gel permeation chromatography (GPC). The polymer layer covalently attached to the wood surface was observed by scanning electron microscopy (SEM). The hydrophobic properties of hybrid materials were confirmed by water contact angle measurements. Water and sodium chloride salt aqueous solution uptake tests confirmed a significant improvement in resistance to the absorption of wood samples after modification with polymers. Antibacterial tests revealed that wood-QPDMAEMA-Br, as well as wood-PMMA-b-QPDMAEMA-Br, exhibited higher antibacterial activity against Gram-positive bacteria (Staphylococcus aureus) in comparison with Gram-negative bacteria (Escherichia coli). The paper presents an economic concept with ecological aspects of improving wood properties, which gives great opportunities to use the proposed approach in the production of functional hybrid materials for industry and high quality sports equipment, and in furniture production.     

Surface modification of PDMS by surface-initiated atom transfer radical polymerization of water-soluble dendronized PEG methacrylate

The current paper reports the synthesis of a highly hydrophilic, antifouling dendronized poly(3,4,5-tris(2-(2-(2-hydroxylethoxy)ethoxy)ethoxy)benzyl methacrylate) (PolyPEG) brush using surface initiated atom transfer radical polymerization (SI-ATRP) on PDMS substrates. The PDMS substrates were first oxidized in H₂SO₄/H₂O₂ solution to transform the Si-CH₃ groups on their surfaces into Si-OH groups. Subsequently, a surface initiator for ATRP was immobilized onto the PDMS surface, and PolyPEG was finally grafted onto the PDMS surface via copper-mediated ATRP. Various characterization techniques, including contact angle measurements, attenuated total reflection infrared spectroscopy, and X-ray photoelectron spectroscopy, were used to ascertain the successful grafting of the PolyPEG brush onto the PDMS surface. Furthermore, the wettability and stability of the PDMS-PolyPEG surface were examined by contact angle measurements. Anti-adhesion properties were investigated via protein adsorption, as well as bacterial and cell adhesion studies. The results suggest that the PDMS-PolyPEG surface exhibited durable wettability and stability, as well as significantly anti-adhesion properties, compared with native PDMS surfaces. Additionally, our results present possible uses for the PDMS-PolyPEG surface as adhesion barriers and anti-fouling or functional surfaces in biomedical applications.     

光交联Pickering乳液中的粒子稳定剂制备胶体体微胶囊

研究了光敏性聚合物刷修饰二氧化硅纳米粒子的制备及其乳化行为, 提供了一种制备新颖“胶体体”微胶囊的方法. 首先, 在二氧化硅纳米粒子表面引入原子转移自由基聚合(ATRP)引发剂分子, 通过表面引发ATRP得到含有香豆素侧基聚合物刷光敏性的纳米二氧化硅粒子(SiO₂-PMMA-PCMA); 然后, 以该粒子为乳化剂制备油包水型的皮克林乳液; 最后, 在紫外光的照射下引发香豆素侧基的交联反应从而得到“胶体体”微胶囊. 结果表明, 香豆素单体7-(2-甲基丙烯酰乙氧基)-4-甲基香豆素(CMA)和SiO₂-PMMA-PCMA在紫外光作用下都可以发生交联反应, 以SiO₂-PMMA- PCMA纳米粒子作乳化剂可以制备稳定的皮克林乳液, 光交联后得到的“胶体体”微胶囊的平均粒径约为170 μm.     

Fe-g-PDEAEMA纳米复合微球的制备及性质研究

由聚N,N-二乙基胺基甲基丙烯酸乙酯(PDEAEMA)与铁纳米颗粒复合制得的纳米铁基复合材料。纳米铁微球表面钝化形成Fe3O4后,将多巴胺基引发剂修饰在Fe3O4的表面,通过表面引发原子转移自由基聚合(SI-ATRP)将DEAEMA单体聚合在修饰了多巴胺基引发剂的表面获得Fe-g-PDEAEMA复合微球。显微结果表明修饰PDEAEMA后,复合微球的分散性得到了一定的提高;XRD数据表明在纳米铁表面生成了一层Fe3O4壳。利用透光率测定研究了复合微球的p H敏感性,表明在酸性条件下悬浮性良好,在碱性条件下发生了沉降,复合微球具有p H敏感性。通过还原降解酸性大红染料,表明Fe-g-PDEAEM复合微球与纳米铁相比,其还原性有所提高,合成的Fe-g-PDEAEMA复合微球可用于氯代烃等氯化物污染的水体保护。     

原子转移自由基聚合法制备新型亲水开管毛细管柱及在毛细管电色谱上的应用

为了增加开管毛细管柱(OTCC)的相比,提高分离效率,发展了表面引发原子转移自由基聚合法(SI-ATRP)制备葡萄糖聚合物修饰的开管毛细管柱。通过扫描电镜观察,该开管柱内壁上修饰了三维波浪状聚合物,明显增加了内壁比表面积和相比。在pH 3~11范围内,对含糖聚合物修饰的开管柱和空柱的电渗流进行了比较。修饰后开管柱的电渗流仅为空柱的1/2~1/3,且在pH 6~11范围内保持平稳。稳定的电渗流保证了分离的重复性和稳定性。用该开管毛细管柱成功实现了小分子混合物(苯丙氨酸、胸腺嘧啶、腺苷、鸟苷、5-溴尿嘧啶、水杨酸)以及蛋白质大分子(核糖核酸酶B、转铁蛋白和牛血清白蛋白)的有效分离,结果表明葡萄糖聚合物修饰的开管毛细管柱具有良好的重复性和稳定性。     

Enhanced Conductivity and Antibacterial Behavior of Cotton via the Electroless Deposition of Silver

In this study, the surface-initiated atom transfer radical polymerization (SI-ATRP) technique and electroless deposition of silver (Ag) were used to prepare a novel multi-functional cotton (Cotton-Ag), possessing both conductive and antibacterial behaviors. It was found that the optimal electroless deposition time was 20 min for a weight gain of 40.4%. The physical and chemical properties of Cotton-Ag were investigated. It was found that Cotton-Ag was conductive and showed much lower electrical resistance, compared to the pristine cotton. The antibacterial properties of Cotton-Ag were also explored, and high antibacterial activity against both Escherichia coli and Staphylococcus aureus was observed.     

Preparation of poly(N-isopropylacrylamide)-grafted well-controlled 3D skeletal monolith based on E-51 epoxy resin for protein separation

A novel type of poly(N-isopropylacrylamide) grafted E-51 epoxy-based monoliths in a 100 mm × 4.6 mm I.D. stainless steel column with well-controlled three-dimensional skeletal structures has been prepared and proposed for the separation of proteins. The grafted PNIPAAm chain via surface-initiated atom transfer radical polymerization was successfully performed. The proposed method provided a new route to modify the E-51 epoxy-based monoliths for widening their applications. Meanwhile, the temperature and the salt concentration responses of the grafted monolithic columns were investigated. Under the salt gradient, six proteins were well separated in hydrophobic interaction mode. Moreover, for further confirming the application of the prepared monolith was meaningful for proteome analysis in actual system, the separation of human serum sample was performed.     

新型反相限进材料及其性能

以溴代硅胶为引发剂,CuBr/2,2-联吡啶为催化体系,在改性硅胶上经二步表面引发原子转移自由基聚合(SIATRP)制备内表面接枝甲基丙烯酸十八烷基酯(C18)、外表面接枝甲基丙烯酸环氧丙酯(GMA)、水解得到表面含大量二醇基的新型反相限进材料。使用傅里叶变换红外光谱(FT-IR)、元素分析和热重分析(TGA)对其表征,采用静态吸附实验研究反相限进材料的吸附性能,其对磺胺二甲氧嘧啶和土霉素的最大吸附量分别为18.02和4.80mg/g。结合固相萃取(SPE)评价其对大分子蛋白质的排阻性能,以牛血清白蛋白(BSA)作为排阻大分子模型,排阻能力达90%。将其用于牛奶中土霉素的分离富集,经高效液相色谱(HPLC)检测,土霉素的平均加标回收率为89.19%,相对标准偏差为3.03%。有望将新型反相限进材料和HPLC或液相色谱-质谱(LC-MS)等分析系统结合应用于生物样品的处理和检测。     

Biomimetic surface preparation of inert polymer films via grafting long monoalkyl chain phosphatidylcholine

To explore construction of novel mimicking biomembrane on biomaterials surfaces,a new polymerizable phosphatidylcholine containing a long monoalkyl chain ended with acryl group(AASOPC) was designed and synthesized, which was easily derived from the terminal amino group of 9-(2-amino-ethylcarbamoyl)-nonyl-1-phosphatidyl-choline (ASOPC) reacting with acryloyl chloride.The obtained AASOPC was grafted on poly(ethylene terephthalate)(PET) via surface-initiated atom-transfer radical polymerization(SI-ATRP) to form mimicking biomembrane.These modified surface structures of PET were investigated using water contact angle(WAC),X-ray photoelectron spectroscopy(XPS) and atomic force microscopy(AFM).The results indicated that the new mimicking phosphatidylcholine biomembrane could be prepared on inert polymer surfaces by using the acryloyl phosphatidylcholine(AASOPC) via surface-initiated atom transfer radical polymerization(SI-ATRP).