甲氧基代多个氧化乙烯结构交联型酚醛聚合物的合成

采用对甲氧基苯酚、多缩乙二醇二氯化物为原料, 合成了五个4,4'-二甲氧基多缩乙二醇二苯醚新单体; 分别经甲醛、2,6-二羟甲基对甲氧基苯酚聚合, 得到二个系列甲氧基代多个氧化乙烯结构交联型酚醛聚合物。这些聚合物含有假冠醚结构单元, 配合容量在0.9-3.0mmol/g之间, 可作为配合树脂使用, 富集分离多种金属离子。     

In situ polymer nanocomposites: Effect of nanoparticles on the interfacial region

Composites based on the blends of polyurethane and poly(methyl methacrylate) of various composition were synthesized in situ in the presence of various amounts of nanoparticles (fumed silica). From thermophysical measurements it was found that, during reaction, phase separation and evolution of two phases occur. The temperature transitions in the systems and their positions depend on the blend composition and on various amounts of nanoparticles. Using scanning differential calorimetry from the changing of heat capacity increments the fraction of an intermediate region between two main phases has been estimated. For the first time it was observed that in nanocomposites in the temperature region between two main relaxation transitions, there appears a third transition, which was related to the adsorption layers formed by both components at the interface of the nanoparticles. The appearance of such intermediate regions increases essentially the fraction of an interfacial region in the system.     

Reaction-Induced Phase Separation and Structure Formation in Polymer Blends

The peculiarities of reaction-induced phase separation and the structure formation in semi- and full interpenetrating polymer networks and in the blends of linear polymers formed in situ are analyzed. It is shown that for most of these systems phase separation proceeds viathe spinodal decomposition mechanism resulting in the formation of interconnected spatially periodic structures. The possible ways for the structure regulation of the composites produced are considered.     

Phase separation at the fiber–matrix interface in composites based on a thermoplastic/polyester blend

A study of the microstructure developing at the surface of glass fibers in a poly(vinyl acetate) (PVAc)/polyester blend is presented. Three different experimental methods are used: a technique based on the Wilhelmy method to measure the wettability of the fibers before curing, and both optical microscopy and atomic force microscopy in the pulsed-force mode to characterize potential phases splitting at the fiber–matrix interface after curing. It was found that, depending on the curing conditions and the concentration in PVAc, the surface treatment of the fiber could have a significant influence on the microstructure. For a concentration in PVAc lower than 5 wt% and a curing temperature of 80°C, extreme cases, such as the development of layers of one of the phases at the surface or the formation of lenses of one phase, were observed. In other cases, in particular for elevated temperatures and higher concentrations in PVAc, the fibers did not exert a significant influence on the morphology. It was also found that in such a reactive system, surface tension considerations alone are insufficient to explain the configuration of the phases at the surface of the fibers.     

任意多阶程序升温优化程序用于氨基酸对映体的分离

用氨基酸对映体在手性毛细管柱上扮离作实例, 研究了任意多阶程升优化程序的普遍适用性. 按计算结果进行实验所得的实际色谱图证明, 优化程序的应用将有助于在保证分离度的前提下, 大大缩短分析时间.提出了一种可以大体反映程序升温下复杂样品各组分在柱内运动过程的轨迹图(x-t图).轨迹图上所显示的每一组分在到达行程终点的时间的准确性得到了色谱实验的验证, 从而为探讨物质在各种条件下的柱内运动状,况特别是为多维色谱的深入研究提供了可能性.     

六氟化铀振动激发态的紫外吸收变化

本文以脉冲CO2激光激发SF6分子,经碰撞V-V传能产生UF6振动激发态,在波长220-330nm范围内研究其紫外吸收瞬时变化.在静态池的条件下,分别测定了脉冲CO2激发能量以及SF6和UF6的分压对紫外吸收变化的影响,曾对2.0TorrSF6和2.0TorrUF6混合气体在激光脉冲能量为160mJ时,振动受激的UF6分子的紫外吸收变化与波长的关系作了研究,发在在240,248,290和313nm处有明显的吸收变化的峰值,这可能系几种不同的高振动态SF6分子的吸收截面的变化所引起的.     

断节参甙的结构

从断节参根的粗甙中分离得到一个新甙——断节参甙(wallicoside,6).经光谱数据及降解反应证明其结构为告达庭-3-O-β-D-葡萄吡喃糖基-(1→4)-β-D-葡萄吡喃糖基-(1→4)-β-D-夹竹桃吡喃糖基-(1→4)-β-D-加拿大麻吡喃糖基-(1→4)-β-D-加拿大麻吡喃糖甙.     

丙炔醇类和丙二烯醇类化合物对映体的气相色谱拆分

使用全甲基-β-环糊精柱(Rt-βDex^TM~cst柱),对5种丙炔醇类和4种丙二烯醇类化合物对映体的气相色谱分离方法进行了研究,结果4种丙炔醇类和4种丙二烯醇类对映体得到分离,分离因子α为1.01～1.04,分离度R一般大于1.5。方法已用于实际不对称合成样品ee值的测定。探讨了对映体在该柱上的拆分机理,认为烷基取代基适当的疏水性和大小是降低非特异性相互作用、形成相对稳定的不对称环糊精包合物,从而成功拆分光学活性异构体的关键。     

用介观动力学模拟Pluronic L64/水/p-Xylene体系的相分离

用介观动力学在介观层次上对不同组分的PluronicL64/水/p-xylene三元体系的相分离进行了研究,得到了和实验相吻合的结果。计算表明对于纯p-xylene溶剂和有含少量水的p-xylene溶剂,体系没有发生相分离,随着水的含量增加,体系发生了明显的相分离,产生了不同形态的胶团。本研究还通过对比不同溶剂组分下的体系介观形貌,讨论了水在体系相分离中的作用。同时通过分析模拟了1000步后体系中水的分布,证实在胶团核中存在自由水(freewater)的猜想。     

冠醚和卟啉与花生酸混合单分子膜行为研究

本文将3'-正十五烷基苯并15-冠-5和六种无脂链难于直接成膜的四苯基卟啉与花生酸混合形成单分子膜。结果表明, 冠醚被嵌进而卟啉被挤出花生酸单分子层。卟啉-花生镉LB膜的可见吸收光谱指出卟啉分子成团聚集。扫描电镜观察了卟啉-花生酸镉混合LB膜的表面形貌, 在膜表面上无金涂层时直接测到了混合膜的相分离。