Non-aqueous capillary zone electrophoresis method for the analysis of paroxetine, tamoxifen, and their main metabolites in urine

The potential of non-aqueous capillary electrophoresis (NACE) was investigated for the simultaneous separation of paroxetine, tamoxifen, and their main metabolites. Baseline separation of the studied solutes was obtained on a  μm capillary using a non-aqueous buffer composed of 18 mM ammonium acetate and 1.1% acetic acid in 80:20 (v/v) methanol-acetonitrile, with a temperature and voltage of 22 °C and 15 kV, respectively. Clomipramine was used as internal standard. Aspects such as stability of the solutions, linearity, accuracy, precision and ruggedness were examined in order to validate the proposed method. Detection limits obtained for all the studied compounds ranged between 3.0 and 7.1 μg l⁻¹. The developed method is sensitive and robust and was used to determine paroxetine, tamoxifen, and their metabolites at clinically relevant levels in human urine. Before NACE determination, the samples were purified and enriched by means of an extraction-pre-concentration step with a pre-conditioned C₁₈ cartridge. Determination of these analytes in the urine of four females urines was demonstrated.     

Investigation of the limitations of saturated fractional factorial experimental designs,with confounding effects for an HPLC ruggedness test

Summary Recently much attention has been directed to the validation of analytical methods. The level of validation will depend on the method application. If a method is developed for general use, for instance by different analysts, instruments or laboratories, then the effect of these changes need evaluation. This is normally referred to as ruggedness testing, where the limitations of the method to changes in the specified conditions are examined.This paper examines the use of Plackett-Burman fractional factorial experiment designs for ruggedness testing in high performance liquid chromatography (HPLC). The ability of these designs to identify confounding effects is applied to the stability indicating analysis of Salbutamol and its major degradation product, AH4045. The results show that confounding effects, proving extremely pertinent to HPLC, can be identified.The assay proved rugged to most tested changes although not to the use of column packing material from different manufacturers.     

Fractal geometry concerned with stable and dynamic fracture mechanics

Fractal modeling of the rugged crack geometry is considered for the stable and dynamic fracture mechanics characterizing the morphology of a fracture surface and the influence of its growth. It is shown that the fractal dimension has a strong influence on the rising of the R-curve in brittle materials. For the unstable Griffith–Mott’s approach or dynamical crack growth the fractal dimension has a strong influence on the velocity limit of the crack growth. It is also shown that the limit of crack velocity lowers with increasing surface ruggedness (higher fractal dimension D = 2 − H) explaining the intangibility of the Rayleigh wave velocity by the cracks.     

Nonaqueous capillary electrophoresis method for the analysis of tamoxifen, imipramine and their main metabolites in urine

The viability of nonaqueous capillary electrophoresis (NACE) was investigated for the simultaneous determination of tamoxifen, imipramine and their main metabolites (4-hydroxytamoxifen and desipramine, respectively). Baseline separation of the studied solutes was obtained on a 57 cm × 75 μm capillary using a nonaqueous solution composed of 17 mM ammonium acetate and 1.25% acetic acid in 80:20 (v:v) methanol-acetonitrile, temperature and voltage 22 °C and 15 kV, respectively, and hydrodynamic injection. Paroxetine was used as internal standard. Different aspects including linearity, accuracy, ruggedness and precision was studied. Detection limits between 9.0 and 15.0 μg L⁻¹ were obtained for all the studied compounds. The developed method is simple, rapid and sensitive and has been used to determine tamoxifen, imipramine and their metabolites at clinically relevant levels in human urine. Before NACE determination, a solid phase extraction (SPE) procedure with a C₁₈ cartridge was necessary. Real determination of these analytes in three females urines were done.     

Estimation of measurement uncertainty for the determination of aflatoxin M1 in milk using immunoaffinity clean-up procedures

A measurement uncertainty estimated for aflatoxin M₁ determination in milk sample has been calculated using data generated from analytical method validation studies. The protocol adopted is described in detail in document LGC/VAM/1998/088. The uncertainty budget was based on precision, trueness and ruggedness data. The individual contributions are described in detail. The expanded uncertainty for aflatoxin M ₁ at a concentration of 20 ng L⁻¹ was estimated as 2.81 ng L⁻¹. This was calculated using a coverage factor of two which gives a level of confidence of approximately 95%. Presented at AOAC Europe / Eurachem Symposium March 2005, Brussels, Belgium     

Method ruggedness studies incorporating a risk based approach: a tutorial

This tutorial explains how well thought-out application of design and analysis methodology, combined with risk assessment, leads to improved assessment of method ruggedness. The authors define analytical method ruggedness as an experimental evaluation of noise factors such as analyst, instrument or stationary phase batch. Ruggedness testing is usually performed upon transfer of a method to another laboratory, however, it can also be employed during method development when an assessment of the method's inherent variability is required. The use of a ruggedness study provides a more rigorous method for assessing method precision than a simple comparative intermediate precision study which is typically performed as part of method validation. Prior to designing a ruggedness study, factors that are likely to have a significant effect on the performance of the method should be identified (via a risk assessment) and controlled where appropriate. Noise factors that are not controlled are considered for inclusion in the study. The purpose of the study should be to challenge the method and identify whether any noise factors significantly affect the method's precision. The results from the study are firstly used to identify any special cause variability due to specific attributable circumstances. Secondly, common cause variability is apportioned to determine which factors are responsible for most of the variability. The total common cause variability can then be used to assess whether the method's precision requirements are achievable. The approach used to design and analyse method ruggedness studies will be covered in this tutorial using a real example.     

Evaluating the impact of extraction and cleanup parameters on the yield of total petroleum hydrocarbons in soil

Interlaboratory comparisons for the analysis of mineral oil in polluted soil using the GC–FID method indicate that extraction and cleanup conditions have significant effects on the analytical results. In this investigation a ruggedness test was performed on the extraction and cleanup method for the determination of total petroleum hydrocarbons in soil. A two-level Plackett–Burman design was utilized to study the effect of 11 different method parameters on the extraction recovery of total petroleum hydrocarbons (TPH) in soil. Both qualitative and quantitative factors were investigated. The results indicate that total petroleum hydrocarbons can be relatively reliably monitored through strict implementation of the ISO and CEN draft standards. However, variation in certain method parameters readily affects the validity of the results. The most critical factors affecting TPH recovery were the solvent and co-solvent used for extraction, the extraction time, adsorbent and its weight and sample TPH concentration. Because adaptation of the draft standards especially with respect to these factors easily leads to TPH recoveries higher than 200% or lower than 70%, the validity of the adapted method should always be verified. A proper estimate of the expanded uncertainty should also be appended to TPH results, because only then can the reliability of the results be guaranteed and further justification is gained to support the end-use of the data. This also supports the credibility of the analytical services and prevents the data end-users from drawing misleading conclusions concerning the environmental risks and potential remediation requirements.     

Comparative study of robustness between micellar electrokinetic capillary chromatography and high-performance liquid chromatography using one-variable-at-a-time and a new multi-variable-at-a-time approach

Micellar electrokinetic capillary chromatography and reverse-phase liquid chromatography methods were developed in order to perform robustness testing to determine the caffeine content in beverages. Both methods were fully validated and two different robustness approaches were applied. One-variable-at-a-time (OVAT) approach at eleven levels (0; ±1; ±2; ±3; ±4; ±5 units) was carried out and compared with multi-variable-at-a-time (MVAT) approach at three levels (±1 unit per investigated parameter). Four analysts in two laboratories on two capillary electrophoresis and two RPLC equipments have tested the samples. Robustness was statistically analyzed using peak area, migration or retention time, symmetry, and resolution of caffeine and sulfacetamide as internal standard, and presented as R.S.D. values. The RPLC method was found to be more sensitive than the MEKC method. Both methods showed acceptable robustness level for OVAT approach, whilst MEKC method was more robust when the determination of real samples coming from different beverages was based on the MVAT approach.     

Experimental sensitivity analysis applied to sample preparation uncertainties: are ruggedness tests enough for measurement uncertainty estimates?

It has been suggested that typical ruggedness tests might lead directly to uncertainty estimates. This assertion is tested using simple experimental studies of uncertainties associated with sample grinding and oven-drying operations. The results are used to predict the outcome of typical ruggedness tests on the same systems. It is concluded that uncertainty estimation from ruggedness tests is appropriate only where a strong effect can be observed. Since current practice in ruggedness testing is predisposed to confirming insignificance, typical ruggedness tests are not likely to lead to reliable uncertainty estimates; instead, lack of statistical significance in ruggedness tests is better interpreted as reason to leave an effect out of the uncertainty budget. Only where the ruggedness study is modified in order to achieve statistically significant change is it useful for uncertainty estimation. Received: 27 November 2000 Accepted: 13 February 2001     

The evaluation of measurement uncertainty from method validation studies

 A protocol has been developed illustrating the link between validation experiments, such as precision, trueness and ruggedness testing, and measurement uncertainty evaluation. By planning validation experiments with uncertainty estimation in mind, uncertainty budgets can be obtained from validation data with little additional effort. The main stages in the uncertainty estimation process are described, and the use of trueness and ruggedness studies is discussed in detail. The practical application of the protocol will be illustrated in Part 2, with reference to a method for the determination of three markers (CI solvent red 24, quinizarin and CI solvent yellow 124) in fuel oil samples. Received: 10 April 1999 / Accepted: 24 September 1999