A branch-and-bound method for the minimum k−enclosing ball problem

The minimum k-enclosing ball problem seeks the ball with smallest radius that contains at least k of m given points. This problem is NP-hard. We present a branch-and-bound algorithm on the tree of the subsets of k points to solve this problem. Our method is able to solve the problem exactly in a short amount of time for small and medium sized datasets.     

Fine Dry Grinding of Zeolite in a Laboratory Ball Mill

This paper presents the importance and usage of natural zeolites, which was recently recognized in the industry. Therefore, the grinding properties of natural zeolite were studied with the emphasis on a kinetic study in a ball mill. The experimental mill employed was laboratory sized, 200 mm diameter, 191 mm length, providing a total mill volume of 6000 cm³, with a total mass of 5.62 kg of steel balls of 25 mm diameter with a charge of 20% of the mill volume and with a rotation speed of 76 rpm. The breakage parameters were determined by using single sized feed fractions of ?850+600 μm, ?600+425 μm, and ?425+300 μm for the zeolite samples. The S_i (specific rate of breakage) and B_{i, j} (primary breakage distribution) values were obtained for those feed size fractions in order to predict the product size distributions by simulation for comparison to the experimental data. From the experimental results, S_i values increased as the feed sizes became coarser, i.e., the highest S_i value was 0.85 min^?1 for ?850+600 μm, while the lowest S_i value was 0.65 min^?1 for ?425+300 μm feed ground in the mill. The B_{i, j} values obtained for the zeolite sample were γ=0.84, ?=0.61, and β=4.25. The breakage parameters obtained showed that the zeolite is broken faster than quartz and slower than calcite and barite in terms of the a_T values reported previously at the same experimental conditions. The simulations of the product size distributions of zeolite were in good agreement with the experimental data using a standard ball mill simulation program. The slowing‐down effect was also seen in the mill after 4 min. of grinding.     

Two-dimensional numerical calculation of the flow field about a scoop inlet by the piecewise linear method

The piecewise linear method (PLM) based on time operator splitting is used to solve the unsteady compressible Euler equations describing the two-dimensional flow around and through a straight wall inlet placed stationary in a rapidly rotating supersonic flow. The PLM scheme is formulated as a Lagrangian step followed by an Eulerian remap. The inhomogeneous terms in the Euler equations written in cylindrical coordinates are first removed by Sod's method and the resulting set of equations is further reduced to two sets of one-dimensional Lagrangian equations, using time operator splitting. The numerically generated flow fields are presented for different values of the back pressure imposed at the downstream exit of the inlet nozzle. An oblique shock wave is formed in front of the almost whole portion of the inlet entrance, the incoming streamlines being deflected towards the higher pressure side after passing through the oblique shock wave and then bending down to the lower pressure side. A reverse flow appears inside the inlet nozzle owing to the recovery pressure of the incoming streams being lower than the back pressure of the inlet nozzle.     

Plasticity field adjacent to faces of asperities on a rotating roll after initial indentation into a half-space

The plastic deformation field near the horizontal surface of a half space of perfectly plastic material associated with an indenting rotating rigid tooth is studied using slip line theory. The tooth is one of many on a roll surface and indents first into the half-space material and then rotates about the roll center. A slip line field is proposed for the deforming plastic region and a solution scheme is outlined. The emphasis is on determining the shape of the deforming region, especially that of the free surface. The study has a potential application in roughness transfer in metal forming processing.     

Eigenvalue approach to study the effect of rotation and relaxation time in generalized magneto-thermo-viscoelastic medium in one dimension

The fundamental equations of the problems of generalized thermoelasticity with one relaxation parameter including heat sources in infinite rotating magneto-thermo-viscoelastic media have been derived in the form of a vector matrix differential equation in the Laplace transform domain for a one dimensional problem. These equations have been solved by the eigenvalue approach to determine deformations, stress, and temperature. The results have been compared to those available in the existing literature. The graphs have been drawn to show the effect of rotation in the medium.     

Condensation film on an inclined rotating disk

The three dimensional problem of steady fluid deposition on an inclined rotating disk is solved by similarity transform. For a given spraying rate there may be one, two or no steady state solution. The inclination causes a downward draining flow and a lateral flow. Perturbation solutions compare well with exact similarity solutions when the fluid film is thin.     

Measuring Light Field of Light Source with High Directional Resolution Using Mirrored Ball and Pinhole Camera

This paper presents a method of measuring a light field of a light source with high directional resolution using a mirrored ball and a pinhole camera. The light field describes a spatial and directional distribution of radiances from the light source. The directional distribution is expanded by a reflection on the mirrored ball, and the radiances are measured by a charge-coupled device (CCD) camera with a pinhole lens. The light source is laterally moved by a robot arm to measure the directionally expanded light field, and each pixel on a CCD can obtain the radiances from the light source through the pinhole lens with high directional resolution. The light field is estimated from the pixel value and the position of each pixel using a ray tracing technique. The light field of a krypton lamp was experimentally measured by the proposed method, and the accuracy of the measurement was evaluated against the irradiances measured by a spectro-radiometer at sample points.     

Unsteady MHD flow of a non-Newtonian fluid on a porous plate

This paper deals with the study of the MHD flow of non-Newtonian fluid on a porous plate. Two exact solutions for non-torsionally generated unsteady hydromagnetic flow of an electrically conducting second order incompressible fluid bounded by an infinite non-conducting porous plate subjected to a uniform suction or blowing have been analyzed. The governing partial differential equation for the flow has been established. The mathematical analysis is presented for the hydromagnetic boundary layer flow neglecting the induced magnetic field. The effect of presence of the material constants of the second order fluid on the velocity field is discussed.     

平面旋转场诱导下磁流变液的结构模型

针对平面旋转场下磁流变液中诱导产生的层状结构 ,提出了恰当的理论模型 ,该模型成功的解释了层状结构在同步旋转状态下 :层间距随磁场的变化关系 ;旋转层的滞后角随旋转角频率以及其他物理量之间的关系 ;层半径与旋转角频率之间的关系 .理论结果与文献中发表的实验结果相吻合     

Design and Experimental Characterization of Low‐Volume PM10/2.5/1.0 Trichotomous Sampler Inlet

This paper presents the development and laboratory evaluation of a PM10/2.5/1.0 trichotomous sampling inlet that consists of two main parts: a previously designed PM10 size‐selective inlet part and a PM2.5/1.0 two‐stage virtual impactor, which was newly fabricated and attached serially to the PM10 size selective inlet part. Particles are collected in three locations through the trichotomous sampling inlet to provide for not only particle concentration measurements of PM10, PM2.5 and PM1.0, but also those of PM2.5–10 and PM1.0–2.5.