Sterically stabilized emulsion polymerization of styrene: Pseudo‐semicontinuous approach

The sterically stabilized emulsion polymerization of styrene initiated by a water‐soluble initiator at different temperatures has been investigated. The rate of polymerization (R_p) versus conversion curve shows the two non‐stationary‐rate intervals typical for the polymerization proceeding under non‐stationary‐state conditions. The shape of the R_p versus conversion curve results from two opposite effects—the increased number of particles and the decreased monomer concentration at reaction loci as the polymerization advances. At elevated temperatures the monomer emulsion equilibrates to a two‐phase or three‐phase system. The upper phase is transparent (monomer), and the lower one is blue colored, typical for microemulsion. After stirring such a multiphase system and initiation of polymerization, the initial coarse polymer emulsion was formed. The average size of monomer/polymer particles strongly decreased up to about 40% conversion and then leveled off. The initial large particles are assumed to be highly monomer‐swollen particles formed by the heteroagglomeration of unstable polymer particles and monomer droplets. The size of the “highly monomer” swollen particles continuously decreases with conversion, and they merge with the growing particles at about 40–50% conversion. The monomer droplets and/or large highly monomer‐swollen polymer particles also serve as a reservoir of monomer and emulsifier. The continuous release of nonionic (hydrophobic) emulsifier from the monomer phase increases the colloidal stability of primary particles and the number of polymer particles, that is, the particle nucleation is shifted to the higher conversion region. Variations of the square and cube of the mean droplet radius with aging time indicate that neither the coalescence nor the Ostwald ripening is the main driving force for the droplet instability. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 804–820, 2003     

Fluorinated,crosslinkable terpolymers based on vinylidene fluoride and bearing sulfonic acid side groups for fuel‐cell membranes

The radical terpolymerization of 8‐bromo‐1H,1H,2H‐perfluorooct‐1‐ene with vinylidene fluoride (VDF) and perfluoro(4‐methyl‐3,6‐dioxaoct‐7‐ene) sulfonyl fluoride is presented. Changing the feed compositions of these three fluorinated comonomers enabled us to obtain different random‐type poly[vinylidene fluoride‐ter‐perfluoro(4‐methyl‐3,6‐dioxaoct‐7‐ene) sulfonyl fluoride‐ter‐8‐bromo‐1H,1H,2H‐perfluorooct‐1‐ene] terpolymers containing various sulfonyl fluoride and brominated side groups. Yields higher than 70% were reached in all cases. The hydrolysis of the sulfonyl fluoride group into the ? SO₃Li function in the presence of lithium carbonate was quantitatively achieved without the content of VDF being affected, and so dehydrofluorination of the VDF base unit was avoided. These original terpolymers were then crosslinked via dangling bromine atoms in the presence of a peroxide/triallyl isocyanurate system, which produced films insoluble in organic solvents such as acetone and dimethylformamide (which totally dissolved uncured terpolymers). The acidification of ? SO₃Li into the ? SO₃H function enabled protonic membranes to be obtained. The thermal stabilities of the crosslinked materials were higher than those of the uncured terpolymers, and their electrochemical performances were investigated. According to the contents of the sulfonic acid side functions, the ion‐exchange capacities ranged from 0.6 to 1.5 mequiv of H⁺/g, whereas the water uptake and conductivities ranged from 5–26% (±11%) and from 0.5 to 6.0 mS/cm, respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4566–4578, 2006     

Oxygen inhibition in thiol–acrylate photopolymerizations

The overall effects of oxygen on thiol–acrylate photopolymerizations were characterized. Specially, the choice of thiol monomer chemistry, functionality, and concentration on the extent of oxygen inhibition were considered. As thiol concentration was increased, the degree of oxygen inhibition was greatly reduced because of chain transfer from the peroxy radical to the thiol. When comparing the copolymerization of 1,6‐hexanediol diacrylate with the alkane‐based thiol (1,6‐hexane dithiol) to the copolymerization with the propionate thiol (glycol dimercaptopropionate), it was found that the propionate system was much more reactive and polymerized to a greater extent in the presence of oxygen. In addition, the functionality was considered where the glycol dimercaptopropionate was compared to a tetrafunctional propionate of similar chemistry (pentaerythritol tetrakis(mercaptopropionate)). Given the same thiol concentration, the higher functionality thiol imparted a faster polymerization rate, due to the increased polymer system viscosity, which limited oxygen diffusion and decreased the extent of overall oxygen inhibition. Thus, preliminary insight is provided into how thiol monomer choice affects the extent of oxygen inhibition in thiol–acrylate photopolymerization. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2007–2014, 2006     

Crosslinked epoxy materials exhibiting thermal remendablility and removability from multifunctional maleimide and furan compounds

Crosslinked polymeric materials, which exhibit thermal remendability and removability through Diels–Alder (DA) and retro‐DA reactions, were obtained from using multifunctional maleimide and furan compounds as monomers. The synthesized monomers possess low melting points and good solubility in organo solvents to show excellent processing properties. The performance of DA and retro‐DA reactions were demonstrated with DSC and FTIR measurements. High performance of thermal remendablility and removability of the crosslinked materials were observed with SEM and solvent tests. These materials were applicable in advanced encapsulants and structural materials. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 905–913, 2006     

Diels—Alder reaction. Effect of internal and external factors on the reactivity of diene—dienophile systems

The key factors influencing the Diels—Alder reaction rate at ambient and elevated pressures were elucidated using data on the reactivity of various diene—dienophile systems in usual and Lewis acid-catalyzed Diels—Alder reactions, the reaction enthalpy, complex formation, dissolution, and solvation, and the donor-acceptor properties of the reactants. It was found that taking account of both the orbital interaction energy and the balance of bond rupture and formation energies allows correct prediction of the reaction rate in the absence or in the presence of Lewis acids.     

Reaction of Tetracopper(I)-Phosphonitocavitand with PhSeSiMe3: Synthesis and Structure of a Polyanionic Cluster [pyH]6[(CuCl)9(μ3-SePh)5(μ4-SePh)]

Treatment of tetracopper(I)-phosphonitocavitand [1·Cu₄(μ-Cl)₄(μ₄-Cl)] (2) (1 = tetraphosphonitocavitand [rccc-2,8,14,20-tetrakis-(iso-butyl)-phosphonitocavitand (C₄₄H₄₈O₈P₄Ph₄)]) with PhSeSiMe₃ in THF at low temperature afforded a novel polyanionic cluster [pyH]₆[(CuCl)₉(μ₃-SePh)₅(μ₄-SePh)] (4) as a major product along with a new tetracopper(I)-phosphonitocavitand (3) with a centered μ₃-Cl. Molecular structure of anionic cluster in 4 consists of six PhSe⁻ bridging ligands containing five μ₃-SePh and one exceptional μ₄-SePh bridging nine copper atoms, of which eight copper atoms have trigonal coordination geometry and the other has distorted tetrahedral geometry. Dedicated to Professor Han-Qin Liu on the occasion of his 70th birthday.     

Lewis-Base Adducts of Group 11 Metal(I) Compounds. LXXVI Structural Studies in the Copper(I) Halide : Norbornadiene System

The structural characterizations of some copper(I) halide (CuX) adducts with norbornadiene (nbd) are recorded. CuCl : nbd (1:1)₄ (a redetermination), (2:1)_2(|), are systems both based around Cu₄Cl₄ cubane-type cluster arrays. CuBr : nbd (7:3)_(|)( 0.5 MeOH), a complex polymer with 3-symmetry, is believed to be the complex previously described as an adduct of 2:1 stoichiometry. Attempts to obtain an iodide counterpart have resulted in the definition of an ephemeral adduct CuI : MeCN (3:2)_(|). 0.5 C₇H₈ in which, remarkably, the nbd is uncoordinated; the complex is a polymer, related to the [AgX(quinoline)]_(|) (X = Cl, Br) saddle polymer.     

Zur Synthese von Human-Big-Gastrin I

The synthesis of the tetratriacontapeptide amide corresponding to the revised primary structure of human big gastrin I is described. For this purpose the fragments were designed in view of the maximum use of those utilized in our previous synthesis of human big gastrin I according to the first sequence proposal. Consequently the key tripeptide-Pro-Pro-His- (sequence 7–9) was prepared in suitably protected form to be used as amino or carboxyl component for assembly of the segments 1–9 and 1–14, respectively. Final condensation of the latter nona- and tetradecapeptide derivatives with the C-terminal segments 10–34 and 15–34 via the azide and the dicyclohexylcarbodiimide/N-hydroxysuccinimide procedure, respectively, leads to crude fully protected human big gastrin I. Upon deprotection by exposure to trifluoroacetic acid in presence of ethanedithiol-(1,2) as scavanger, ion exchange chromatography and partition chromatography, the desired tetratriacontapeptide amide was isolated in satisfactory yield with a high degree of purity. The identical immunological behaviour of the synthetic material, if compared with that of natural human big gastrin I, represents ulterior strong evidence for the correctness of the newly proposed structure for this putative prohormonal form of the gastrins.

Kurzmitteilung:Wünsch E., Wendlberger G., Mladenova-Orlinova L., Göhring W., Jaeger E., Scharf R., Gregory R. A., Dockray G. J., Hoppe-Seyler's Z. Physiol. Chem.362, 179 (1981).     

Syntheses with organoboranes. IX. Vinyl- and 1-alkenyldichloroboranes as ethylene and 1-alkene equivalents for the Diels–Alder reaction

Vinyl- and 1-alkenyldichloroboranes were used as dienophiles for the Diels–Alder reaction with representative aliphatic and cyclic 1,3-dienes. The organoborane adducts were transformed into the corresponding olefins either by protonolysis or by oxidation–mesylation–reduction. Direct protonolysis of the adducts gave in most cases mixtures of olefins whereas the reduction of mesylates with lithium triethylborohydride produced pure olefins in good yields.     

NMR studies of interionic interactions in N-methylformamide

The NMR chemical shifts of alkali and thallium(I) salts with various monovalent anions have been measured in N-methylformamide solution. Lithium-7 chemical shifts are virtually concentration and counter-ion independent, presumably due to an absence of direct cation-anion interactions. The sodium-23, potassium-39 and cesium-133 chemical shifts of the salts studied depend on the anion and vary linearly with the concentration. The observed behavior can be accounted for by the formation of collisional ion pairs. On the other hand, the thallium-205 chemical shifts of thallium(I) nitrate and perchlorate were anion-dependent and varied non-linearly with the salt concentration. These results are indicative of contact ion pair formation; formation constants were calculated to be 2.6±0.4 M ^–1 for TlNO ₃ and 1.7±0.5 M ^–1 for TlClO ₄ . The cesium-133 NMR spectra of several mixed electrolyte systems also have been measured in N-methylformamide solution. The¹³³Cs chemical shifts also change linearly with the concentrations of the salts added to 0.10 M CsI/NMF solutions. The influence of the anions on the chemical shifts is the same as that observed for cesium salts alone.