Improved spacer design and cost reduction in an electrodialysis system

In electrodialysis using thin membranes and spacers, the compactness of the membrane cell-pairs leads to a small potential drop, and hence to energy saving. The spacer design itself has a great effect on the cost of the plants, since spacers act as turbulence promoters. A careful design, to increase the mass transfer coefficients, can reduce the membrane surface area required for a given application. Limiting current measurements, cell-pair resistance and pressure losses are presented for several thin spacers, for different flow-velocity values and feed water concentrations. It was possible to find an advantageous geometry of the separating mesh leading to substantial savings on investment and operation costs.     

弱(L_1,L_2)-BLD映射的正则性

本文首先将文［１］中的ＢＬＤ映射推广为弱（Ｌ１，Ｌ２）－ＢＬＤ映射，并证明了如下正则性结果：存在两个可积指数 Ｐ１＝Ｐ１（ｎ，Ｌ１，Ｌ２）＜ｎ＜ｑ１＝ｑ１（ｎ，Ｌ１，Ｌ２），使得对任意弱（Ｌ１，Ｌ２）－ＢＬＤ映射ｆ∈（Ω，Ｒｎ），都有ｆ∈（Ω，Ｒｎ），即ｆ为（Ｌ１，Ｌ２）－ＢＬＤ映射．     

Synthesis of lanthanum–strontium manganites by oxalate-precursor co-precipitation methods in solution and in reverse micellar microemulsion

Nanostructured lanthanum–strontium manganites were synthesized using two different co-precipitation approaches, one in bulk solution, and the other in reverse micelles of CTAB/1-hexanol/water microemulsion. In both cases, precursor cations were precipitated by using oxalic acid. The properties of the materials synthesized by using these two methods were compared in order to reveal potential advantages of the microemulsion-assisted approach. The influence of the annealing conditions on the properties of synthesized manganites was investigated by using X-ray diffraction, transmission electron microscopy, differential thermal analysis, thermogravimetric analysis and magnetic measurements.     

Reverse micellar synthesis and properties of nanocrystalline GMR materials (LaMnO3, La0.67Sr0.33MnO3 and La0.67Ca0.33MnO3): Ramifications of size considerations

Nanoparticles of complex manganites (viz. LaMnO₃, La_0.67Sr_0.33MnO₃ and La_0.67Ca{0.33}MnO₃) have been synthesized using the reverse micellar route. These manganites are prepared at 800‡C and the monophasic nature of all the oxides has been established by powder X-ray diffraction studies. TEM studies show an average grain size of 68, 80 and 50 nm for LaMnO₃, La_0.67Sr_0.33MnO₃ and La_0.67Ca{0.33}MnO₃respectively. Ferromagnetic ordering is observed at around 250 K for LaMnO₃, 350 K for La_0.67Sr_0.33MnO₃ and 200 K for La_0.67Ca{0.33}MnO₃. These Curie temperatures correspond well with those reported for bulk materials with similar composition.     

The <Emphasis Type="Italic">M</Emphasis>/<Emphasis Type="Italic">G</Emphasis>/∞ system revisited: finiteness,summability, long range dependence,and reverse engineering

We explore M/G/∞ systems ‘fed’ by Poissonian inflows with infinite arrival rates. Three processes – corresponding to the system's state, workload, and queue-size – are studied and analyzed. Closed form formulae characterizing the system's stationary structure and correlation structure are derived. And, the issues of queue finiteness, workload summability, and Long Range Dependence are investigated. We then turn to devise a ‘reverse engineering’ scheme for the design of the system's correlation structure. Namely: how to construct an M/G/∞ system with a pre-desired ‘target’ workload/queue auto-covariance function. The ‘reverse engineering’ scheme is applied to various examples, including ones with infinite queues and non-summable workloads. AMS Subject Classifications Primary: 60K25; Secondary: 60G55, 60G10     

Studies on the self-assembly behavior of the amphiphilic block copolymer of PSt-b-PAA in apolar solvents with polar fluorescent probe

The block copolymer of polystyrene-b-poly(butyl acrylate) (PSt-b-PBA) with a well-defined structure was synthesized by atom transfer radical polymerization (ATRP); its structure was characterized, and the living polymerization was also validated by gel permeation chromatography, Fourier transform infrared, and ¹H NMR measurements. Then, the amphiphilic block copolymer of polystyrene-b-poly(acrylic acid) (PSt-b-PAA) has been prepared by hydrolysis of PSt-b-PBA, and copolymers of PSt-b-PAA with longer PSt blocks and shorter PAA blocks were obtained by controlling the conditions of ATRP polymerization. The reversed micelle solution of PSt-b-PAA in toluene was prepared by using the single-solvent dissolving method, and the reverse micellization behavior of PSt-b-PAA in toluene was mainly investigated in this paper. The fluorescent probe technique was used by using polar fluorescence compound N-(1-Naphthyl)ethylenediamine dihydrochloride (NEAH) as a polar fluorescent probe to study the reverse micellization behavior of PSt-b-PAA. It was found that the reverse micellization behaviors of PSt-b-PAA in toluene can be clearly revealed by using NEAH as a polar fluorescence probe, and the critical micelle concentrations (cmcs) can be well displayed. The experimental results showed that the self-assembling behavior of PSt-b-PAA in toluene depends apparently on the microstructure of the macromolecules and is also influenced by the temperature. For the copolymers of PSt-b-PAA with the same length of hydrophobic PSt blocks, the copolymer with a longer hydrophilic block PAA has lower cmc, and at higher temperature, the copolymer has lower cmc.     

Convex programs with an additional reverse convex constraint

A method is presented for solving a class of global optimization problems of the form (P): minimizef(x), subject toxD,g(x)0, whereD is a closed convex subset ofR ⁿ andf,g are convex finite functionsR ⁿ . Under suitable stability hypotheses, it is shown that a feasible point is optimal if and only if 0=max{g(x):xD,f(x)f( )}. On the basis of this optimality criterion, the problem is reduced to a sequence of subproblemsQ _k ,k=1, 2, ..., each of which consists in maximizing the convex functiong(x) over some polyhedronS _k . The method is similar to the outer approximation method for maximizing a convex function over a compact convex set.     

Selenium Nanoparticles Prepared from Reverse Microemulsion Process

Selenium nanoparticles were prepared by a reverse microemulsion system. Sodium selenosulfate was used as selenium source. The results showed that hydrochloric acid concentration and reaction temperature had great influence on the morphology of products. The crystalline selenium nanowires and amorphous selenium nanorods were obtained in given condition.