Fluorine containing phosphazene polymers

In this paper we highlighted the synthesis, characterization, and practical exploitation of different types of polyphosphazenes substituted with fluorinated groups. There are several ways in which fluorine atoms can be inserted into polyphosphazenes, all of which leading to different polymers showing a wide range of characteristics. In general it is true that the insertion of fluorine atoms into phosphazene macromolecules leads to an enhancement of the thermal stability, flame resistance, low-temperature elastomericity, and chemical inertness of the phosphazenes obtained. The contribution of Italian research groups to the preparation and exploitation of organic commercial macromolecules grafted onto fluorinated polyphosphazenes is also reviewed.     

Reactivities of tetraalkyltin complexes toward Pt/HY zeolite

Tetraalkyltin complexes, SnR₄ (R = Me, Et, Pr, Bu) could react with Pt/HY at 193, 243, 273 and 333 K, respectively. The reactions occurred on the surface of the zeolite and the organotin grafted zeolites were characterized in detail. The framework and the microporous structure of the grafted Pt/HY zeolites were retained. However, the modified zeolites showed better size selectivity in the absorption of hydrocarbons.     

An aqueous route to organically functionalized silica diatom skeletons

Diatomaceous earth was functionalized by grafting organotrialkoxysilane precursors onto the surface of the porous silica cell walls of this biomineral. Vinyl- and mercapto-containing structures were prepared in aqueous media without disruption of the diatomic architecture. Successful grafting of the organic moieties was confirmed using solid state ²⁹Si MAS NMR spectroscopy, and the presence of the intact diatom framework by scanning electron microscopy. The sorption properties of mercaptopropyl-functionalized diatoms towards heavy metals was studied by measuring the accessibility and diffusion rates of mercury(II) species to the binding sites (-SH) by the means of electrochemical methods.     

Electrokinetic and contact angle measurements of grafted carbon fibers

 The grafting method that has successfully been applied to methacrylic acid and liquid crystalline monomers was expanded to prepare amphoteric carbon fiber surfaces using 2-(N,N-dimethylamino)ethyl methacrylate as monomer. The obtained carbon fiber surfaces were characterized by contact angle and ζ-potential measurements. The expected basic behavior was not observed, instead an amphoteric character of the modified carbon fiber surface was found. The fiber surfaces display a basic character in the acidic pH-range, while they are acidic in the alkaline part of the pH-scale. An important influence is derived from the amount of initiator used to graft the monomers onto the fibers. The smaller the initiator concen-tration used during polymerization, the larger the amount of amino functionalities introduced to the carbon fiber surface. The wetting behavior versus water depends on the overall conformation of the immobilized polymer. During immersion into water the polymer acts hydrophobic, while during emersion, a hydrophilic character is observed, probably derived from conformational changes and swelling during the contact angle measure-ments in water. Received: 9 June 1998 Accepted: 13 August 1998     

Enhancing Isolated Ti（ Ⅳ ） Framework Sites in HMS

IntroductionTitanium modified mesoporous molecular sieves,such as Ti-MCM-41[1—4], Ti-HMS[5], Ti-SBA15[6, 7], and their catalytic performances havebeen investigated. Framework substitution and graftingtechniques have been employed for the preparation ofti…     

乙酰化淀粉/DL-丙交酯接枝共聚物的合成及降解性能研究

用醋酸乙烯酯和玉米淀粉反应制备出了不同取代度乙酰化淀粉，再用乙酰化淀粉同DL－丙交酯接枝共聚合成乙酰化淀粉／DL－丙交酯接枝共聚物。研究了原料配比，淀粉取代度对接枝反应单体转化率（C％），接枝率（G％）接枝效率（GE％）和接枝支链数均分子量（Mn)的影响，结果表明在给定的试验条件下接枝共聚反应的C％，G％，GE％和Mn可分别达到40％，225％，80％和1．4万。接枝共聚物在磷酸缓冲溶液和户外土壤掩埋降解实验表明，在160天内样品失重率分别为71％和60％，表明合成的乙酰化淀粉／DL－丙交酯接枝共聚物具有很好的降解性能。     

Improved solid-phase peptide synthesis of ‘difficult peptides’ by altering the microenvironment of the developing sequence

Three types of resins, related to the spacer, environmental and microenvironmental models were prepared by grafting commercial AMP polymer with 2-[2-(2-aminoethylamino)-2-oxoethoxy]acetic acid. All resins were highly loaded and functionalized with Rink-amide linker. A comparative synthesis of the classic difficult sequence ACP (65-74) on the prepared resins by Fmoc/t-Bu chemistry is presented. The ‘microenviromental’ model resin afforded the crude peptide in the highest purity (98%).     

Ce(IV) ion initiated graft polymerization of glycidylmethacrylate onto a demineralized bone matrix: effect of reaction parameters

Studies on chemical modification of demineralized bone matrix (DBM) have opened new arenas in the field of clinical orthopedics owing to its potential osteoinductivity with desired chemical functionality. To widen its usage to biomolecular delivery, graft polymerization of glycidylmethacrylate onto DBM was carried out by a free-radical initiating process using ceric ammonium nitrate as an initiator. The evidence of the grafting reaction was examined by chemical analysis using Fourier transform IR spectroscopy. The grafting condition was standardized by regulating the reaction parameters such as the concentrations of the backbone, the monomer and the initiator, the polymerization temperature and time. The optimum polymerization temperature and time to have the maximum grafting yield were 40 °C and 3 h, respectively. The percentage of grafting and the percentage of grafting efficiency were determined as a function of the reaction parameters, and both were found to increasing initially and thereafter decrease in most of the cases. The grafting results are discussed in a detailed fashion and a reaction mechanism is proposed.     

接枝和交联对纳米Si02改性NR／PP共混型热塑弹性体的影响

动态硫化制备纳米二氧化硅（SiO2）改性天然橡胶，聚丙烯共混型热塑性弹性体（NR/PPTPE）．研究了马来酸酐，苯乙烯，过氧化二异丙苯（MAH／St／DCP）多单体“就地”熔融接枝、交联对TPE力学性能、耐溶剂性能和耐热变形性能的影响，并用SEM分析了TPE的断面形貌．结果表明：纳米SiO2和MAH／St／DCP的最佳质量分数分别为0．03和0．0375／0．0188／0．00375时，MAH／St／DCP接枝、交联改性NR／PP／纳米SiO：TPE的力学性能、耐溶剂性能和耐热变形性能最佳．MAH／St／DCP“就地”接枝、交联通过细化交联NR分散相、改善交联NR分散的均匀性和增加两相之间的共交联，使NR与PP两相界面结合强度明显提高，NR／PPTPE的综合性能得到明显的改善．     

Radiation-induced crosslinking and grafting of two polyphosphazene elastomers

The radiation-induced crosslinking and grafting of two aryloxy-substituted elastomeric polyphosphazenes have been carried out by both gamma and electron beam irradiation. The classic Charlesby–Pinner [1] plus a simpler approach were used to determine the G(X) values for the crosslinked elastomeric polymers. The apparent G(X) value for the same polymer depended on whether the gamma-ray or the E-beam results were used. The presence of 8.5% repeat units with allylic groups in the side chain increased the G(X) value by an order of magnitude when the irradiation was performed under vacuum with the gamma source. The extent of acrylic acid grafting was also higher for the polymer containing the allylic group. Nearly all the grafted polyphosphazene films were insoluble in THF, a good solvent for the ungrafted samples.