Physico-chemical aspects of polyethylene processing in an open mixer. Part 26: Formal kinetics of aldehyde and carboxylic acid formation at a constant rate

Formation of carboxylic acids at a constant rate can be easily explained. It seems to result from the formation and decomposition of α,γ-keto-hydroperoxides. Formal kinetics based on formation and decomposition of these structural units is in agreement with the experimental findings. The activation energy deduced from the calculations is negligible, in agreement with the experimental data showing the constant rate to be practically temperature independent. Comparison of the acids with the hydroperoxides and ketones formed initially shows that the rate of oxygen addition to alkyl radicals is significantly smaller than in low molecular mass liquids. The same conclusion is reached on comparing directly the acids formed on decomposition of α,γ-keto-hydroperoxides in polyethylene melt and in hexadecane. The rate of oxygen addition in polyethylene melt is closer to 2 × 10⁵ than to 6 × 10⁵ (s⁻¹) that is valid in hexadecane.It is possible to attribute the relatively small amount of aldehydes that might be formed at a constant rate to different reactions of alkoxy radicals that are not in a cage with other radicals. These alkoxy radicals result from the addition of peroxy radicals to unsaturated bonds. This addition is followed mainly by epoxide formation and simultaneous release of an alkoxy radical.     

Physico-chemical aspects of polyethylene processing in an open mixer. Part 29: Experimental kinetics and mechanisms of γ-lactone formation

The experimental kinetics for γ-lactone formation shows more complexity than that for acids. Nonetheless, it can be concluded to the existence of a constant rate of formation from the beginning of the experiments with polyethylene melts. There is an additional term contributing to γ-lactone formation in the initial stages that is cubic in processing time. In the advanced stages of processing, in the high temperature range (170-200 °C), the concentration of γ-lactones increases linearly with the processing time.There are many mechanisms susceptible to give γ-lactones on polyethylene melt processing. Some of them are based on decomposition of intermediates formed directly on chain propagation. This is so for the α,γ-keto-hydroperoxides in 4-position to hydroxyl groups. Since decomposition of these intermediates is very fast, the reaction might account for a constant rate of γ-lactone formation from the beginning of polyethylene processing. Decomposition of the α,δ-keto-hydroperoxides formed on intramolecular reactions on chain propagation is not so fast as that of the α,γ-keto-hydroperoxides. Nonetheless, it might account for part of the delayed formation of γ-lactones. The same is valid for the mechanisms based on peroxidation of aldehydes and γ-hydroxy trans-vinylene groups that involve intermediates that are formed on polyethylene peroxidation. They might be important for explaining the cubic term as well as γ-lactone formation in the advanced stages of polyethylene processing.     

Assessment of some iterative methods for non-symmetric linear systems arising in computational fluid dynamics

Various tests have been carried out in order to compare the performances of several methods used to solve the non-symmetric linear systems of equations arising from implicit discretizations of CFD problems, namely the scalar advection-diffusion equation and the compressible Euler equations. The iterative schemes under consideration belong to three families of algorithms: relaxation (Jacobi and Gauss-Seidel), gradient and Newton methods. Two gradient methods have been selected: a Krylov subspace iteration method (GMRES) and a non-symmetric extension of the conjugate gradient method (CGS). Finally, a quasi-Newton method has also been considered (Broyden). The aim of this paper is to provide indications of which appears to be the most adequate method according to the particular circumstances as well as to discuss the implementation aspects of each scheme.     

The synthesis mechanism of Ca3Al2O6 from soft mechanochemically activated precursors studied by time-resolved neutron diffraction up to 1000°C

The reaction pathway for the Ca₃Al₂O₆ formation up to 1300°C, from mechanochemically treated mixtures of amorphous aluminum hydroxide and CaCO₃, was studied in situ by differential thermal analysis, constant heating rate dilatometry and time-resolved neutron powder diffraction. The experiment was carried out, in an open system, on a sample with the nominal Ca₃Al₂O₆ stoichiometry. The results obtained by neutron diffractometry and thermal analysis were in good agreement with the data obtained by scanning electron microscopy and X-ray diffraction on heat-treated and-quenched samples. The synthesis path implied the formation of cryptocrystalline Al₂O₃, crystalline CaO, CaAl₂O₄ and Ca₁₂Al₁₄O₃₃ as transitory phases. Finally the nucleation and growth of the single phase Ca₃Al₂O₆ took place at 1300°C and exhibited porous structure due to CO₂ and H₂O release.     

超临界二氧化碳在高分子合成及加工领域的应用

重点概述了近年来超临界二氧化碳作为环境友好介质在高分子合成与加工方面研究的新进展,具体介绍了在超临界二氧化碳中丙烯酸的合成及疏水改性方面所做的工作,并在此基础上,展望超临界二氧化碳作为高分子合成介质的前景。     

Preparation and properties of sol-gel coating films

The present state of our knowledge on sol-gel coating films has been reviewed. A qualitative discussion is made on the limit of the film thickness which can be achieved in the sol-gel method and the factors affecting the film thickness. Considering that properties of the film are intimately related to the microstructure, types of microstructures accomplished by the sol-gel coating are introduced with examples.     

Trends in Preconcentration Procedures for Metal Determination Using Atomic Spectrometry Techniques

 Methods for metal preconcentration are often described in the literature. However, purposes are often different, depending on whether the methods are applied in environmental, clinical or technological fields. The respective method needs to be efficient, give high sensitivity, and ideally also is selective which is useful when used in combination with atomic spectroscopy. This review presents the actual tendencies in metal preconcentration using techniques such as Flame Atomic Absorption Spectrometry (FAAS), Electrothermal Atomic Absorption Spectrometry (ETAAS), Hydride Generation Atomic Absorption Spectrometry (HGAAS), Inductively Coupled Plasma Optical Emission Spectrometry (ICP OES) and Inductively Coupled Plasma Mass Spectrometry (ICP-MS). Procedures based on related to electrochemical, coprecipitation/precipitation, liquid–liquid and solid–liquid extraction and atom trapping mechanisms are presented. Correspondence: Department of Analytical Chemistry, Universidade Estadual de Campinas – UNICAMP, P.O. Box 6154, 13083-970 Campinas, Brazil. e-mail: zezzi@iqm.unicamp.br Received December 20, 2001; accepted October 11, 2002     

Lack of dissipativity is not symplecticness

We show that, when numerically integrating Hamiltonian problems, nondissipative numerical methods do not in general share the advantages possessed by symplectic integrators. Here a numerical method is called nondissipative if, when applied with a small stepsize to the test equationdy/dt = iy, real, has amplification factors of unit modulus. We construct a fourth order, nondissipative, explicit Runge-Kutta-Nyström procedure with small error constants. Numerical experiments show that this scheme does not perform efficiently in the numerical integration of Hamiltonian problems.This research has been supported by project DGICYT PB92-254.     

信息型常见毒物质谱用户库的建立及其在毒物快速筛选上的应用研究

质谱定性是目前世界上最通用的定性分析方法之一,在法庭科学领域毒物分析实践中,质谱一直是对未知样品进行药毒物筛选检测的利器.     

Hexagonal Ferrites from Melts and Aqueous Solutions,Magnetic Recording Materials

Owing to their particular crystallographic properties, ferrimagnetic hexagonal ferrites exhibit a far greater coercive force than the conventional magnetic pigments. They therefore appear to be suitable for use in magnetic information storage procedures, some of which are novel and are at the development stage. Thus, magnetic tapes of high coercive force containing barium ferrite could be used as master tapes for copying magnetic information or for producing forgery-proof magnetic cards, if magnetic heads having high-order write fields were successfully developed. Moreover, platelet-like ferrite pigments in which the preferred direction of magnetic orientation is perpendicular to the plane of the platelet are of great interest for perpendicular magnetic recording. In this progress report, the crystal structures, magnetic characteristics of hexagonal ferrites, and chemical processes for their production are discussed. In particular, reactions in salt melts or under hydrothermal conditions produce finely divided pigments whose particles have a pronounced hexagonal, plate-like habit, a narrow particle size distribution, and advantageous magnetic properties. The magnetic properties of the pigments crystallized from salt melts may be adjusted by cation exchange.