Kinetics of thermochemical pretreatment of lignocellulosic materials

The results of an experimental study of the acid hydrolysis of hardwood are presented in the form of values for the three parameters, activation energy, power on the acid concentration, and pre-exponen-tial factor, of the first order kinetic constants for each of the following reaction participants: xylan remaining, glucan remaining, xylose formed, and xylose decomposed. These are used as a base for a quantitative theory to predict the temperature, time, and acid concentrations needed for effective pretreatment of the substrate for subsequent enzymatic hydrolysis of the glucan. This theory is based on the assumption that successful pretreatment requires >90% removal of the xylan, <10% removal of the glucan, and >80% xylose yield. This theory is compared with selected published data.     

The impact of polystyrene resins in solid-phase organic synthesis

Summary A major objective of the DIVERSOMER^® technology is to provide pure and characterized compounds for biological testing in order to prevent false negatives in our libraries. On several occasions, analysis of the final products by¹H-NMR and MS, has revealed by-products from the polystyrene solid support. Subsequently, three alternative methods were studied to remove polystyrene by-products; (i) prewashing of the resin prior to execution of the synthesis; (ii) pretreatment of the resin with the cleavage conditions consistent with the solid-phase synthesis reaction scheme; and (iii) parallel purification.     

Pretreatment of swine wastewater using anaerobic filter

Efforts were made to assess the efficiency of an anaerobic filter packed with porous floating ceramic media and to identify the optimum operational condition of anaerobic filter as a pretreatment of swine wastewater for the subsequent biological removal of nitrogen and phosphorus. A stepwise decrease in hydraulic retention time (HRT) and an increase in organic loading rate (OLR) were utilized in an anaerobic filter reactor at mesophilic temperature (35°C). The optimum operating condition of the anaerobic filter was found to be at an HRT of 1 d. A soluble chemical oxygen demand (COD) removal efficiency of 62% and a total suspended solids removal efficiency of 39% at an HRT of 1 d were achieved with an OLR of 16.0 kg total COD/(m³·d), respectively. The maximum methane production rate approached 1.70 vol of biogas produced per volume of reactor per day at an HRT of 1 d. It was likely that the effluent COD/total Kjeldahl nitrogen ratio, of 22, the COD/total phosphorous ratio of 47, and the high effluent alkalinity >2500 mg/L as CaCO₃ of the anaerobic filter operated at an HRT of 1 d was adequate for the subsequent biological removal of nitrogen and phosphorus.     

Influence of pretreatment conditions on low-temperature CO oxidation over Au/MOx/Al2O3 catalysts

Composite oxide MO_x/Al₂O₃ supported gold catalysts for low-temperature CO oxidation were prepared and investigated. The presence of transition metal oxide was proved to be beneficial to the improvement of catalytic performance of Au/Al₂O₃ catalysts for low-temperature CO oxidation. Furthermore, the influence of various pretreatment conditions on Au/MO_x/Al₂O₃ catalysts was studied carefully. The image of TEM showed that gold catalyst with small gold particles only in the form of a fine dispersion exhibited highly catalytic activity. The XPS, Fourier transform infrared (FTIR) spectroscopy characterization results of Au/FeO_x/Al₂O₃ catalyst showed that gold catalysts having partially oxidized gold species have the best catalytic performance. One possible pathway for CO oxidation on Au/FeO_x/Al₂O₃ catalyst is that the CO adsorbed on gold particles reacts with adsorbed oxygen, which is possible to occur on oxygen vacancies on the support or at the metal–support interface.     

猪肝样品中莱克多巴胺测定的前处理方法

研究猪肝样品中莱克多巴胺测定的样品前处理方法。样品直接用HCl酸解并超声提取,同时添加70%~72%的高浓度HClO_4对酸解样品进行蛋白沉淀,然后经MCX固相萃取柱净化后,用液相色谱-串联质谱法检测。用正交试验考察了酸的种类、浓度、提取时间、提取温度和HClO_4体积对提取效率的影响,最佳条件为:HCl浓度为0.2mol/L,提取时间为40min,提取温度为25℃,HClO_4用量为200μL。从0.5、5.0和10.0μg/kg添加水平检测结果可以看出,方法平均回收率为82.0%~102%,日内和日间精密度4%,符合国家标准对检验方法的要求。该方法灵敏度高,精密度好,成本低,能简便、快速对样品中的莱克多巴胺进行提取,实现对动物源性食品的快速监测。     

Pretreatment combining ultrasound and sodium percarbonate under mild conditions for efficient degradation of corn stover

Ultrasound (US) can be used to disrupt microcrystalline cellulose to give nanofibers via ultrasonic cavitation. Sodium percarbonate (SP), consisting of sodium carbonate and hydrogen peroxide, generates highly reactive radicals, which cause oxidative delignification. Here, we describe a novel pretreatment technique using a combination of US and SP (US–SP) for the efficient saccharification of cellulose and hemicellulose in lignocellulosic corn stover. Although US–SP pretreatment was conducted under mild condition (i.e., at room temperature and atmospheric pressure), the pretreatment greatly increased lignin removal and cellulose digestibility. We also determined the optimum US–SP treatment conditions, such as ultrasonic power output, pretreatment time, pretreatment temperature, and SP concentration for an efficient cellulose saccharification. Moreover, xylose could be effectively recovered from US–SP pretreated biomass without the formation of microbial inhibitor furfural.     

电化学还原预处理对BiVO_4薄膜电极光电化学氧化水性能的提高

在酸性水溶液中(pH=2.0),采用电化学还原(ER)方法对BiVO4薄膜电极进行预处理,并探讨了其对薄膜电极光电化学氧化水性能的影响.结果表明,这种预处理可显著提高电极的光电化学氧化水的性能,且具有良好的光电化学稳定性.利用扫描电子显微镜、X射线衍射、拉曼光谱、光电子能谱、紫外-可见漫反射光谱、荧光光谱、电化学阻抗谱及Mott-Schottky等方法对ER处理前后的电极进行了表征.结果表明,ER预处理使电极粗糙度增大,表面积增大约1.4倍;电极材料的晶型无明显变化,但V—O对称伸缩振动略有红移;表面Bi,V和O结合能变小,Bi3+部分被还原,Bi/V原子比增大;ER处理导致电极平带电位负移,光生载流子在薄膜电极/溶液界面转移速率加快,表面复合速率降低.这些变化和表面积增加是BiVO4电极光电化学性能提高的主要原因.     

超临界二氧化碳偶合超声预处理强化玉米秸秆酶水解(英)

提出了一个木质纤维素生物质预处理的全绿色加工过程.以玉米秸秆和玉米芯为原料,以超临界CO₂和超声偶合法对木质纤维素进行预处理.超临界CO₂预处理条件为:压力15-25 MPa,温度120₁70℃,含水量50%,反应时间0.5₄ h.超声场功率600W,温度80℃,作用时间2-8 h.用纤维素酶水解反应获得的还原糖总量来评价预处理效果.结果表明,单纯超临界CO₂和超临界CO₂偶合超声预处理都能够提高生物质水解反应还原糖产量.对于玉米芯,超临界CO₂预处理（170℃,20 MPa,3 0min）后,还原糖产率为62%（未预处理的为12%）.对于玉米秸秆（170℃,20 MPa,2.5 h）,还原糖产率为46.4%.对于玉米芯,超临界CO₂偶合超声预处理（600 W,80℃下超声处理6 h,然后用170℃,20 MPa超临界CO₂预处理30 min）后,还原糖产率为87%.对于玉米秸秆,超临界CO₂偶合超声预处理（600 W,80℃下超声处理8 h,然后用170℃,20 MPa超临界CO₂预处理1 h）后,还原糖产率为25.5%.与未处理生物质相比,X射线衍射结果表明玉米秸秆和玉米芯在超临界CO₂和超声预处理后其结晶度没有明显变化.扫描电镜分析则发现木质纤维素的表面积显著增加.     

电感耦合等离子体发射光谱法测定记号笔笔芯和墨水中铜和铬

报道了使用ICP-AES测定记号笔芯和墨水中的铜和铬的方法。 主要关注了不同的样品前处理方法的研究。 结果表明: 对标记用的油性记号笔笔芯和含有高分子树脂的墨水, 采用550 ℃灰化, 混合酸(V_HNO3∶V_HClO4=3∶1)溶解的方法处理样品, 是该类样品比较好的处理方法; 而对不含有高分子树脂的墨水, 采用直接用混合酸(V_HNO3∶V_HClO4=3∶1)的消解即可。 消解后的样品经稀酸酸化后, 采用ICP-AES测定铜和铬, 结果准确、稳定。该方法适合记号笔或墨水中元素的测定。     

天然纤维预处理技术研究进展

天然纤维预处理是影响天然纤维强化生物复合材料的关键因素。文章首先从天然纤维的物理特性、化学成分和吸湿特性三方面对纤维性能进行了陈述,针对这些性能综述了国内外常用的天然纤维预处理方法,重点介绍了碱化处理、硅烷处理、高锰酸盐处理和过氧化物处理等化学方法,并对比了天然纤维经常用化学改性方法处理后产生的结果;其次介绍了机械加工...