Microextraction of metal ions based on solidification of a floating drop: Basics and recent updates

This review provides a comprehensive evaluation of solidified floating organic drop microextraction (SFODME) procedures for metal ions preconcentration and their contributions to green chemistry. In this article we focused on the modifications that have been performed in the recent years to improve this environmentally friendly procedure. Among the most important of these modifications are the inclusion of ultrasonic energy, vortex and air agitation to enhance the dispersion process. The article also discussed new challenges in the procedure by using more ecofriendly solvents as extractants such as ionic liquids, deep eutectic. and supramolecular solvents. The coupling of SFODME with solid phase extraction increases selectivity and efficiency of the preconcentration procedure.     

Convergent Flows of Molten Polymers Modeled by Generalized Second-Grade Fluids of Power-Law Type

The molding processes of polymer melts involve geometrically complex dies. Such dies are usually tapered or streamlined to achieve a maximum output rate under conditions of laminar flow. The model of a generalized second-grade fluid of power-law type is used and the results obtained are illustrated by examples of convergent flows in conical and wedge-shaped dies.     

Silicon-Based Integrated Optic Pressure Sensor Using Intermodal Interference between TM-Like and TE-Like Modes

In this paper, a silicon-based integrated optic pressure sensor using an intermodal interference between the fundamental TM-like and TE-like modes is described. The sensor consists of a micromachined rectangular diaphragm and a straight polystyrene optical waveguide passing over the diaphragm. Its sensitivity is theoretically known to be strongly dependent on the position of the waveguide over the diaphragm. To experimentally investigate such dependence, we fabricated a sensor with a 1.2 mm ×10 mm ×20 μm diaphragm, over which waveguides were placed at 50 μm intervals. The measured phase sensitivity was 98 mrad/kPa for the waveguide nearest to the diaphragm edge. The measurement was also carried out for the other waveguides. As theoretically expected, the largest sensitivity was obtained for the waveguide nearest to the edge.     

OADM环网的实验研究

研究了光分插复用器(OADM)的关键技术,重点分析了相关的实现技术,完成了利用OADM构建全光环网的实验研究,给出了重要的实验数据,包括眼图、光谱图、光信噪比、保护与恢复等,并对这些实验数据进行了分析,为光传送网的设计与构建提供了重要的参考依据.     

Modelling of a single drop impact onto liquid film using particle method

The process of single liquid drop impact on thin liquid surface is numerically simulated with moving particle semi‐implicit method. The mathematical model involves gravity, viscosity and surface tension. The model is validated by the simulation of the experimental cases. It is found that the dynamic processes after impact are sensitive to the liquid pool depth and the initial drop velocity. In the cases that the initial drop velocity is low, the drop will be merged with the liquid pool and no big splash is seen. If the initial drop velocity is high enough, the dynamic process depends on the liquid depth. If the liquid film is very thin, a bowl‐shaped thin crown is formed immediately after the impact. The total crown subsequently expands outward and breaks into many tiny droplets. When the thickness of the liquid film increases, the direction of the liquid crown becomes normal to the surface and the crown propagates outward. It is also found that the radius of the crown is described by a square function of time: r_C = [c(t ? t₀)]^0.5. When the liquid film is thick enough, a crown and a deep cavity inside it are formed shortly after the impact. The bottom of the cavity is initially oblate and then the base grows downward to form a sharp corner and subsequently the corner moves downward. Copyright © 2004 John Wiley & Sons, Ltd.     

Simulation and fabrication of carbon nanotubes field emission pressure sensors

A novel field emission pressure sensor has been achieved utilizing carbon nanotubes (CNTs) as the electron source. The sensor consists of the anode sensing film fabricated by wet etching process and multi-wall carbon nanotubes (MWNTs) cathode in the micro-vacuum chamber. MWNTs on the silicon substrate were grown by thermal CVD. The prototype pressure sensor has a measured sensitivity of about 0.17-0.77 nA/Pa (101-550 KPa). The work shows the potential use of CNTs-based field-emitter in microsensors, such as accelerometers and tactile sensors.     

利用有效液滴模型对超重元素α衰变半衰期的研究

利用有效液滴模型计算了偶偶超重核的α衰变半衰期,计算过程中采用了保持碎片体积守恒的不对称形状描述以及有效惯性系数计算Gamow势垒穿透因子.首先在质子数Z为88—98的区域检验了有效液滴模型,发现计算结果与实验符合得比较好.随后将此模型推广到Z≥100的情况,虽然只用了两个模型参数,计算结果与实验数据符合,说明有效液滴模型是计算偶偶超重核素α衰变半衰期的一个成功模型.     

Improved convergence of a non-perturbative semi-classical pressure broadening model

It is shown that by including the second term of Magnus expansion, improved convergence can be achieved for the non-perturbative pressure broadening formalism proposed by Neilson and Gordon (J. Chem. Phys. 58 (1973) 4131). The present method was applied to the line broadening calculations of CO in a bath of Ar.     

热声驱动系统中的压力测量

介绍了自制的用于热声驱动脉管制冷装置的计算机压力波数据采集系统。该系统由硅压电压力传感器、数据采集卡、PC机和基于 Labview软件的图形化用户界面 GUI( Graphical User In-terface)组成。试验证明 ,它具有结构简单、高效精确、操作简便等特点 ,在捕捉被测系统内的动态压力变化方面具有优势 ,不但能很好地满足热声驱动器的压力测量要求 ,而且亦可移植到任何类似的测量气体压力的场合     

K-Dependence and temperature dependence of N2-, H2-, and He-broadening coefficients for the J = 12-11 transition of acetonitrile CH3CN located near 220.7 GHz

Extensive experiments on the K = 3 component of the J = 12-11 rotational transition of acetonitrile CH₃C¹⁴N, located near 220.7 GHz, were performed at different temperatures in the range 235-350 K. They allow determining the N₂-, H₂-, and He-broadening coefficients, as well as their temperature dependences. More specific measurements on all the K-components of the involved transition perturbed by N₂ at 303 K allow to point out a clear decreasing of the broadening coefficient with increasing K. Narrowing effects are clearly observed, and experimental lines were analysed both with Voigt and speed dependent Voigt profiles; but no exhaustive lineshape study was carried out. All the experimental parameters are compared with results derived from a semiclassical calculation of collisional interactions, including electrostatic, induction, and dispersion energy contributions.