Mechanisms of n‐butanol formation in butyl acrylate latexes

The mechanisms involved in the formation of n‐butanol during the synthesis of butyl acrylate containing latices were investigated. The experimental results showed that neither the hydrolysis of butyl acrylate nor of the ester bond in the butyl acrylate segments of the polymer played a major role in the formation of n‐butanol, which was mainly generated from the polymer backbone, by transfer reactions to polymer chain followed by cyclization. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5838–5846, 2007     

CATALYSIS OF POLYSTYRENE N-HYDROXYL SULFONAMIDE FOR ESTERIFICATION OF BUTANOL WITH ACETIC ANHYDRIDE

1. INTRODUCTION The development of efficient polymer-supported catalysts has attracted much attention [1]. For obtaining polymeric catalysts, catalytically active groups were introduced onto polymers mostly by copolymerization of the appropriate monomers bearing the desired catalyticfunctionalities (e.g. imidazole, OH, and COOH) or by modification of preformed polymers.Another possibility involves the attachment of side chains, containing the desired arrangement of functional groups, o…     

Synthesis and blending behavior of an oligoarylenevinylene. Design towards processable materials for LED applications

A bisstyrenebenzene with improved solubility can be obtained by a lateral phenyl substituent on the phenylene ring. The phenyl substituted bisstyrenebenzene (PBSB) was synthesized by Pd-catalyzed coupling of 2,5-dibromobiphenyl and styrene. PBSB exhibits blue fluorescence in solution. Blends of PBSB and polystyrene or polycarbonate are homogeneous over a wide concentration range of PBSB, based on differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). The results were compared with the blending behavior of unsubstituted bisstyrenebenzene.     

Structural morphology of poly(styrene)-poly(butyl acrylate) polymer-polymer composites studied by dynamic mechanical measurements

The emulsion polymerization process allows production of polymer particles with different structural morphologies. Films obtained after coalescence keep some memory of this morphology, but large modifications can occur during coalescence. In the present case, one of the polymers, polystyrene (PS), exhibits a glass temperature (Tg) much higher than the filmification temperature (close to room temperature), while the other one, poly(butyl acrylate) (PBA), has a much lowerTg. Furthermore, it is well known that dynamic mechanical measurements can be very helpful in providing information on the morphology of polymer materials, i.e., on geometrical and topological arrangement of homopolymer domains. At first, this method was used for comparison of two types of films: i) the first one obtained from structured-core (PS)-shell (PBA) particles, ii) the second one obtained from a blend of homopolymer particles (PS and PBA). It appears that the expected core-shell particles lost their geometric structure in the second film. Second, comparison of the predicted dynamic modulus and experimental data shows that i) strong interactions exist between PS nodules unless their coalescence has occured, leading to an abnormally high modulus at room temperature, ii) after achieving their coalescence, PS forms a more or less continuous phase. Both phenomena strongly depend on the particle size and their respective volume fractions.     

A study of the polymerization of styrene initiated by K-THF-GIC system

In this paper, the polymerization of styrene initiated by potassium (K)-tetrahydrofuran (THF)-graphite intercalation compound (GIC) (K-THF-GIC) was studied. The mechanism of the polymerization was determined to be anionic polymerization according to its characteristics. The effect of the concentration of the initiator and monomer was studied. It was found that the polymerization mainly occurred on the surface and edge of the intercalated graphite. It was also shown that the polarity of solvent has little effect on the polymerization yield in this system.     

STUDY ON THE CONCENTRATION DEPENDENCE OF ORIENTATION OF POLYSTYRENE ON SILVER BY THE SERS TECHNIQUE*

Polystyrene films were adsorbed onto a silver surface from dichloromethane solutions with concentrations of 0.1 to12 wt%, and then studied by the surface enhanced Raman technique. A critical concentration for coil interpenetration wasobserved.     

Platinum carbonyl derived catalysts on inorganic and organic supports: a comparative study

Fumed silica, silica gel, silica-alumina and cross-linked (5.5%) polystyrene have been functionalized with quaternary ammonium groups and the Chini cluster [Pt₁₂(CO)₂₄]²⁻ has been anchored onto these functionalized materials by ion pairing. A catalyst has also been prepared by the adsorption of Na₂[Pt₁₂(CO)₂₄] on unfunctionalized fumed silica. The catalytic activities of the resultant materials, and that of commercially purchased 5% platinum on alumina have been studied for the hydrogenation of a variety of unsaturated compounds. The substrates studied are: α-acetamidocinnamic acid, cyclohexanone, acetophenone, methyl pyruvate, ethyl acetoacetate, nitrobenzene and benzonitrile. Compared to the polystyrene supported catalyst, the inorganic oxide supported catalysts have higher surface areas and for most of the substrates have notably higher activities. The functionalized fumed silica-based catalyst gives higher conversions than functionalized silica gel and silica-alumina-based catalysts. In the hydrogenation of acetophenone and ethyl acetoacetate, the functionalized fumed silica-based catalyst show superior activity compared to the commercial platinum catalyst, and the catalyst made by conventional adsorption method. In benzonitrile hydrogenation with all the cluster-derived catalysts a hydrazine derivative is selectively formed, but when the commercial platinum catalyst is used benzyl amine is the main product.     

Early-stage flocculation kinetics of polystyrene latex particles with polyelectrolytes studied in the standardized mixing: Contrast of excess and moderate polyelectrolyte dosage

Standardized mixing procedure was applied to the analysis of flocculation of polystyrene latex (PSL) particles with polyelectrolytes. After confirming the initial enhancement of flocculation rate in the very beginning followed by abrupt stop with excess dosage, attention was shifted to the system of moderate dosage. In the former, effects of ionic strength were further analyzed to find the consistency with adsorption isotherm. In the latter, flocculation started slowly in the beginning, sometime slower than salt-induced rapid coagulation, however, the rate gradually increases in the middle stage. Often, the increased rate exceeds that of salt-induced rapid coagulation. This behavior emerged more clearly in the case of lower ionic strength. This is the indication that the rate of relaxation of polymer on the colloidal surface is a function of surface coverage and ionic strength. The ultimate degree of flocculation is usually higher than that observed for excess dosage. The size distribution of flocs was also examined, however, no clear difference between different experimental conditions was confirmed for the same degree of flocculation.     

大分子引发－转移－终止剂

大分子引发－转移－终止剂杨文君，李俊柏，沈家骢（青岛化工学院橡塑工程研究所，青岛，２６６０４２）（吉林大学化学系，长春，１３００２３）关键词聚苯乙烯，聚丙烯酰胺，嵌段共聚，扩链反应，引发－转移－终止剂含有二乙基二硫代氨基甲酸基的有机硫化物或大分子，在...     

三维有序大孔杂化材料SiW11O39^8——SiO2和γ—SiW10O36^8——SiO2的制备与表征

通过溶胶 -凝胶和聚苯乙烯模板等方法制备了含缺位 Keggin阴离子 Si W1 1 O8- 3 9和 γ-Si W1 0 O8- 3 6的三维有序大孔杂化氧化硅复合材料 ,并通过紫外漫反射光谱 ( UV/ DRS)、傅里叶变换红外光谱 ( FTIR)、固体核磁共振波谱 ( MAS NMR)等手段对其结构进行了表征 .结果表明 ,杂化材料中的 Keggin阴离子仍保留其基本骨架结构 ,但其与氧化硅基体之间存在化学作用 .杂化材料的孔道结构用扫描和透射电子显微镜 ( SEM和TEM)进行表征 ,其平均孔径为 ( 335± 5 0 ) nm.对杂化材料孔壁的微孔性通过氮气吸附进行了测定 .此类材料对水溶液中羟基丁二酸的降解反应具有活性 ,光催化过程中未发现 Keggin阴离子自载体中脱落的现象 .