Polyphenylsulfone/multiwalled carbon nanotubes mixed ultrafiltration membranes: Fabrication,characterization and removal of heavy metals Pb2+, Hg2+, and Cd2+ from aqueous solutions

Polyphenylsulfone/multiwalled carbon nanotubes/polyvinylpyrrolidone/1-methyl-2-pyrrolidone mixed matrix ultrafiltration flat-sheet membranes were fabricated via phase inversion process to inspect the heavy metals separation efficacy from aqueous media. Fabricated membranes cross-sectional morphological changes and the topographical alterations were assessed with Scanning electron microscopy (SEM) and atomic force microscopy (AFM). Particularly, MWCNTs assisted membranes exhibited better permeability ability as well as heavy metal removal enactment than virgin membrane. The dead-end filter unit was engaged in current research to examine the permeability and heavy metal removal competence of membranes. With the continuous enhancement of MWCNTs wt% in a polymer matrix, significant enhancement was observed with pure water flux study, from 41.69 L/m² h to >185 L/m² h as well as with the heavy metals separation study. Added additive MWCNTs can impact the pore sizes in membranes. The heavy metal separation results achieved, the membrane with 0.3 wt% of MWCNTs (PCNT-3) exhibited >98%, >76% and >72% for Pb²⁺, Hg²⁺ and Cd²⁺ ions, respectively. Overall, MWCNTs introduced PPSU membranes exposed best outcomes with heavy metals contained wastewater treatment.     

Microcellular foams from polyethersulfone and polyphenylsulfone: Preparation and mechanical properties

Polymeric foams having microcellular structures were successfully prepared from some high-performance thermoplastics, specifically polyethersulfone and polyphenylsulfone. A two-stage batch foaming process was used and the resulting materials had average cell sizes in the range 2-13 μm, and cell densities the order of 10¹⁰-10¹¹ cells/cm³. The foam densities (relative to those of the unfoamed polymers) were in the range 0.90-0.35. Average cell sizes increased with foaming temperature and foaming time; on the other hand, cell densities and relative foam densities decreased slightly with foaming temperature but remained almost constant with foaming time. Experimental values of Young’s modulus in compression and the elastic collapse strength were higher than theoretically predicated at high relative densities, but the discrepancies became small at lower densities. In contrast, Young’s moduli in tension were in very good agreement with theory, but the relative strengths were somewhat lower than predicated.