掺C60有机玻璃的吸收光谱研究

研究了Ｃ６０分别在有机玻璃（ＰＭＭＡ）和正己烷中的吸收光谱，发现Ｃ６０在有机玻璃中的吸收峰同在正己烷中相互对应，同时前者的吸收峰相对于后者峰宽变大，峰位产生红移，分析了产生这种现象的原因。     

(甲基)丙烯酸酯的基团转移聚合

<正> 基团转移聚合方法自问世以来,由于其突出的优点,受到日益广泛的重视。本文来用丙二酸二乙酯的硅烯醇醚类引发剂3-乙氧基-3-三甲基硅氧基丙烯酸乙酯 (CH_3CH_2O_2CCH=C(OCH_2CH_3)OSiMe_3)和亲核型催化剂四乙基二氯化氢氨((CH_3CH_2)_4NHF_2)进行甲基丙烯酸甲酯(MMA)、丙烯酸丁酯(BA)、丙烯酸乙酯(EA)和丙烯酸甲酯(MA)的基因转移聚合。得到了近     

STUDY ON FLUORESCENCE BEHAVIOUR OF EU~(3+) CONTAINING POLY(METHYL METHACRYLATE)

Fluorimetry has been used to characterize ionomers synthesized by copolymerization ofmethyl mehacrylate, methacrylic acid and europium methacrylate (EMA). Under excita-tion of UV light at 375 nm no seif-quenching was found in fluorescence of EMA containingionomers at 615nm within the concentration range of 1.6×10~(-2) to 11.49×10~(-2) mol%.This means that the distance between two Eu~(3+) ions is larger than 5nm. In the sameconcentration range seif-quenching took place in europium octanoate (EOA) containingpoly(methyl methacrylate) in which EOA was doped as an additive.     

~(13)C NMR法研究环氧戊烯醛的热异构化

本文利用~(13)C NMR方法研究顺式环氧戊烯醛(1)的热异构化。测定了1在受热前后的~(13)CNMR谱,标识了它和它的热异构化产物的~(13)C NMR谱线;通过对异构化过程的动力学考察,表明1的热转化遵从一级反应规律,分别求出了80,100,120和140℃下的反应速度常数,并估算了活化能;同时也监测了异构化产物的变化过程。     

聚氨酯／聚甲基丙烯酸甲酯互穿聚合物网络的研究

本文对(蓖麻油-聚乙二醇)聚氨酯/聚甲基丙烯酸甲酯(PU/PMMA)互穿聚合物网络(IPN)体系进行了研究.实验结果表明:IPN的力学性能受网络化学构型控制.在PU/PMMA为25/75时,应力-应变曲线出现屈服点,产生类似皮革行为,并在此点抗张强度最高,表现明显的协同效应.动态力学性能及电镜均证明该体系相分离十分严重,通过加入扩链剂及网间交联剂能显著改善两组分相容性,其中网间交联剂效果最好。     

Microchip electrophoretic protein separation using electroosmotic flow induced by dynamic sodium dodecyl sulfate-coating of uncoated plastic chips

Separation of sodium dodecyl sulfate (SDS)-protein complexes is difficult on plastic microchips due to protein adsorption onto the wall. In this paper, we elucidated the reasons for the difficulties in separating SDS-protein complexes on plastic microchips, and we then demonstrated an effective method for separating proteins using polymethyl methacrylate (PMMA) microchips. Separation difficulties were found to be dependent on adsorption of SDS onto the hydrophobic surface of the channel, by which cathodic electroosmotic flow (EOF; reversed flow) was generated. Our developed method effectively utilized the reversed flow from this cathodic EOF as a driving force for sample proteins using permanently uncoated but dynamic SDS-coated PMMA microchips. High-speed (6 s) separation of proteins and peptides up to 116 kDa was successfully achieved using this system.     

Determination of various deformation processes in impact-modified PMMA at strain rates up to 105%/min

The deformation processes in impact-modified PMMA, which deforms homogeneously, were determined by means of the stress/strain experiment (, ) with simultaneous lateral strain measurement (_lat) in a wide range of strain rates () up to 10⁵%/min (impact stress). The elastic, plastic cavitation and plastic shear processes were determined as a function of strain. Therefore we calculated the elastic strain ( _el), the elastic volume expansion ( _{vol el}), the cavitation strain ( _cav), which is identical with the plastic volume expansion ( _{vol pl}), the shear strain ( _sh) and the energy densities (W_el, W_cav, W_sh) related to these three processes.For strains of 3 % onward it was found that plastic shear processes and plastic cavitation processes are responsible for a partial loss of elastically stored energy. Both plastic processes turn out to be mostly anelastic deformations, their amount depending strongly on the strain rate. The contributions of the processes to the total deformation of the unmodified PMMA in its strain range are similar to those of the impact-modified PMMA, and the high impact strength is caused by a shift of the catastrophic rupture to very high strains.     

Electrostatic interactions between amphoteric latex particles and proteins

The electrostatic interactions between amphoteric polymethyl methacrylate latex particles and proteins with different pI values were investigated. These latex particles possess a net positive charge at low pH, but they become negatively charged at high pH. The nature and degree of interactions between these polymer particles and proteins are primarily controlled by the electrostatic characteristics of the particles and proteins under the experimental conditions. The self-promoting adsorption process from the charge neutralization of latex particles by the proteins, which have the opposite net charge to that of the particles, leads to a rapid reduction in the zeta potential of the particles (in other words colloidal stability), and so strong flocculation occurs. On the other hand, the electrostatic repulsion forces between similarly charged latex particles and the proteins retard the adsorption of protein molecules onto the surfaces of the particles. Therefore, latex particles exhibit excellent colloidal stability over a wide range of protein concentrations. A transition from net negative charge to net positive charge, and vice versa (charge reversal), was observed when the particle surface charge density was not high enough to be predominant in the protein adsorption process.     

Initial lamellar thickness dependency of recrystallization behavior of poly(4‐methyl‐1‐pentene)

The isothermal crystallization and subsequent melting process in semicrystalline poly(4‐methyl‐1‐pentene) were investigated via temperature‐dependent small‐ and wide‐angle X‐ray scattering and Flash DSC techniques. In a phase diagram of inversed crystalline lamellar thickness and temperature, the crystallization and melting lines can be described by two linear dependencies of different slopes and different limiting temperatures at infinite lamellar thickness. Upon subsequent heating, recrystallization lines with different slopes were observed for samples with different lamellar thickness, indicating changes in surface free energy difference between stabilized crystallites and mesomorphic phase. The surface free energy of native crystallites with extended‐chain conformation decreased with increasing lamellar thickness due to a more ordered surface region and less chain ends which changes cooperatively with mesomorphic phase. The surface free energy of stabilized crystallites remained unchanged for all lamellar thickness. Therefore, the recrystallization lines with different slopes are consequences of changes in surface free energy of mesomorphic phase. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 219–224     

Cationic para‐phenyl‐substituted α‐diimine nickel catalyzed ethylene and 4‐methyl‐1‐pentene (co)polymerizations via living/controlled chain‐walking

Upon activation with diethylaluminium chloride (Et₂AlCl), a series of phenyl‐substituted α‐diimine nickel precatalysts conducted 4‐methyl‐1‐pentene (4MP) and ethylene (E) (co)polymerizations via controlled chain‐walking to generate branched amorphous polymers with high molecular weight and narrow molecular weight distribution (M_w/M_n < 1.6). The obtained poly(4MP)s were amorphous elastomers with glass transition temperature (T_g) of ?10 ~ ?24 °C, which are higher than that of E‐4MP copolymer ( ? 63.0 °C). At room temperature (25 °C), 4MP polymerization proceeds in a living manner. The microstructures of the produced poly(4MP)s indicated the 2,1‐ and 1,2‐insertion followed by chain‐walking, the latter being predominant. The NMR analyses of the polymers showed that the obtained poly(4MP) possessed methyl, isobutyl, 2,4‐dimethylpentyl and 2‐methylhexyl groups, while the isobutyl and 2,4‐dimethylalkyl branches derived from 4MP were observed in the E‐4MP copolymer. The branch structures and the insertion‐type of monomer were depended on the polymerization temperature, and the content of methyl branch increased with an increase in the polymerization temperature.