Sonochemical conversion of CO2 into hydrocarbons: The Sabatier reaction at ambient conditions

In this study, we investigated an alternative method for the chemical CO₂ reduction reaction in which power ultrasound (488 kHz ultrasonic plate transducer) was applied to CO₂-saturated (up to 3%) pure water, NaCl and synthetic seawater solutions. Under ultrasonic conditions, the converted CO₂ products were found to be mainly CH₄, C₂H₄ and C₂H₆ including large amount of CO which was subsequently converted into CH₄. We have found that introducing molecular H₂ plays a crucial role in the CO₂ conversion process and that increasing hydrogen concentration increased the yields of hydrocarbons. However, it was observed that at higher hydrogen concentrations, the overall conversion decreased since hydrogen, a diatomic gas, is known to decrease cavitational activity in liquids. It was also found that 1.0 M NaCl solutions saturated with 2% CO₂ + 98% H₂ led to maximum hydrocarbon yields (close to 5%) and increasing the salt concentrations further decreased the yield of hydrocarbons due to the combined physical and chemical effects of ultrasound. It was shown that CO₂ present in a synthetic industrial flue gas (86.74% N₂, 13% CO₂, 0.2% O₂ and 600 ppm of CO) could be converted into hydrocarbons through this method by diluting the flue gas with hydrogen. Moreover, it was observed that in addition to pure water, synthetic seawater can also be used as an ultrasonicating media for the sonochemical process where the presence of NaCl improves the yields of hydrocarbons by ca. 40%. We have also shown that by using low frequency high-power ultrasound in the absence of catalysts, it is possible to carry out the conversion process at ambient conditions i.e., at room temperature and pressure. We are postulating that each cavitation bubble formed during ultrasonication act as a “micro-reactor” where the so-called Sabatier reaction -$C{O}_2+4H_2\stackrel{\mathit{Ultrasonication}}{\to }C{H}_4+2H_{2}O$ - takes place upon collapse of the bubble. We are naming this novel approach as the “Islam-Pollet-Hihn process”.     

Olefinic-ester cyclizations using Takai-Utimoto reduced titanium alkylidenes

The scope and limitations of the Takai-Utimoto reagent to induce the cyclization of olefinic-esters is described. Critical is the steric environment about both the ester and the olefin. Mechanistically, these results support the hypothesis that cyclized product comes from an olefin metathesis, carbonyl-olefination sequence.     

A convergent approach to the formal total synthesis of hemibrevetoxin B

A convergent synthesis of the key synthetic intermediate of hemibrevetoxin B was achieved via the intramolecular allylation of an α-chloroacetoxy ether and subsequent ring-closing metathesis.     

Regioselectivity in the ene-reaction of singlet oxygen with cyclic alkenes: photooxygenation of methyl-substituted 1,4-cyclohexadiene derivatives

The photooxygenation of the 1-methyl-, 2,3-dimethyl-, and 1,4-dimethylcyclohexa-1,4-dienes, which are readily available through Birch reduction, yielded the corresponding ene-products. The formed endocyclic dienes were trapped by the addition of singlet oxygen to give the corresponding bicyclic endoperoxy hydroperoxides. In the case of 1-methylcyclohexa-1,4-diene and 1,4-dimethylcyclohexa-1,4,-diene, the cis-effect determined the product distribution. Photooxygenation of 2,3-dimethylcyclohexa-1,4-dienes gave mainly exocyclic olefin, which was attributed to the lowered rotational barrier of the methyl group and increased reactivity of the methyl groups.     

A column packing for isothermal gas chromatographic analysis of C1−C5 paraffins and monoolefins and dimethyl ether

Summary An analytical GC method was developed which uses a single packed column consisting of three packings in series prepared with the following liquid phases: dimethyl sulfolane, propylene carbonate, and silver nitrate. This system provides satisfactory resolution of mixtures of C₁–C₅ hydrocarbons and dimethyl ether obtained when converting methanol to gasoline. Due to the high capacity of the column it is possible to inject larger sample amounts permitting trace analysis.     

Functionalization of saturated hydrocarbons. High temperature bromination of octahydropentalene. Part 19

The synthesis and thermal bromination of octahydropentalene was studied. The reaction afforded 1a,3a,4b,6b-tetrabromo-1,2,3,4,5,6-hexahydropentalene (14) with remarkable regio- and stereospecificity. The structure of the product was determined by ¹H and ¹³C NMR data and single X-ray structural analysis. The treatment of octahydropentalene with tenfold bromine gave the octabromopentalene derivative. The formation mechanism of the products is discussed.     

沸石上萘的催化破环反应

沸石上萘的催化破环反应朱建华刘琳胡玉海曹洁明须沁华（南京大学化学化工学院化学系，南京２１００９３）关键词沸石催化剂，ＨＭＳ中孔分子筛，萘，多环芳烃，催化裂解，环境保护分类号Ｏ６４３／Ｘ５当前，治理大工业生产带来的环境污染已经成为全球关注的课题，也是...     

Semiempirical calculation of electronic spectra of organic compounds by using the improved method of new-γ electron repulsion integral. Part 2. Polycyclic aromatic hydrocarbons (PAHs)

Excitation energies of 123 polycyclic aromatic hydrocarbons were calculated by incorporating the improved method of new-γ for the two-center electron repulsion integral into two semiempirical molecular orbital methods (CNDO/S and INDO/S). This variable method well reproduced experimental excitation energies of them. The average error of the improvement is about 0.162 (CNDO/S) or 0.237 eV (INDO/S) though the average error without the improvement is about 0.541 (CNDO/S) or 0.536 eV (INDO/S). The improvement was useful for the calculations of other organic compounds including hetero atoms, such as organic dye.     

The correlation between molecular polarizability of PAHs and their retention data on various stationary phases in reversed-phase HPLC

Summary The equation for the potential energy of interactions established for gas-liquid chromatography has been confirmed in reversed phase liquid chromatography. Equations derived for molecular polarizabilities of PAHs and their retention data have very high correlation coefficients. The results indicate that the inductive effect between solute and stationary phase is the main one and the dispersive effect is very small compared with the inductive effect but its contribution increases with the carbon chain length of the stationary phase.     

Controlled-porosity glasses as alternative adsorbents to silica gel for HPLC

Summary The paper deals with the use of controlled-porosity glasses (CPGs) as adsorbents for HPLC. The physicochemical and chromatographic properties of small-pore CPGs are compared to the analogous properties of silica gels. The results show good correlation between them and suggest the possibility of application of CPGs as adsorbents for liquid chromatography.