Charge transfer complexes and salts of ionenes

A review of the synthesis and properties of ionenes is presented. Particular attention is paid to the electrical and related properties of conductive teteracyano-p-quinodimethane (TCNQ) complex salts of ionenes containing ammonium or sulfonium groups in the main chain and to their chemical stability. The recent work on preparation of such ionenes with inorganic and organic counterions which show interesting linear and nonlinear optical properties is also discussed. It is shown that in the solid state ionenes act as a kind of a matrix fixing, in a chemically controlled way, positions and distribution of different kinds of counterions. Because the reaction of counterion exchange is easy in the case of ionenes it provides a convenient way to prepare a broad class of polyelectrolytes with many different properties.     

Synthesis and Antibacterial Activity of Selenium-functionalized Poly(ε-caprolactone)

A selenium-functionalizedε-caprolactone was synthesized by introducing a phenyl selenide group at the 7-position.A polymer was obtained through the ring-opening polymerization of this monomer in a base/thiourea binary organocatalytic system.A living polymerization process was achieved under mild conditions.The resulting polymers had a controlled molecular weight with a narrow molecular weight distributions and high end-group fidelity.Random copolymers could be obtained by copolymerizing this monomer withε-caprolactone.The thermal degradation temperature of the obtained copolymers decreased with the increasing molar ratio of selenide functionalized monomer in copolymers,while the glass transition temperature increased.In addition,the phenyl selenide side group could be further modified to a polyselenonium salt,which resulted in a polymer with good antibacterial properties.The survival rate of E.coli and S.aureus was only 9%with a polymer concentration of 62.5μg/mL.     

Conformational changes of strong polycations in the presence of divalent counterions and their influence upon the flocculation efficiency

The interaction between strong polycations, which possess the ammonium quaternary centers attached to an acrylic macromolecular chain derived from poly(N,N-dimethylaminoethyl methacrylate) (polycations Q_x), and divalent counterions was investigated by viscometry and turbidimetry. Conformational changes of polycations were influenced by the polycation charge density, counterion nature (SO₄²⁻ or S₂O₈²⁻) and concentration. The morphology of the polycation layers deposited onto silicon wafers has been studied by tapping mode atomic force microscopy, a strong influence of the polycation and ammonium persulfate concentration on the surface topography being observed. The optimum flocculation concentration of polycation decreased and the flocculation window increased in the presence of S₂O₈²⁻, in the destabilization of kaolin model dispersion. Removal of Congo Red from aqueous solution by the complex system formed between polycations and divalent counterions was also investigated. The behavior of polycations Q_x in separation processes was compared with that of one polycation containing 95 mol% N,N-dimethyl-2-hydroxypropyleneammonium chloride units in the backbone (PCA₅).     

A Facile Route for the Synthesis of Polycationic Tellurium Cluster Compounds: Synthesis in Ionic Liquid Media and Characterization by Single‐Crystal X‐ray Crystallography and Magnetic Susceptibility

An innovative soft chemical approach was applied, using ionic liquids as an alternative reaction medium for the synthesis of tellurium polycationic cluster compounds at room temperature. [Mo₂Te₁₂]I₆, Te₆[WOCl₄]₂, and Te₄[AlCl₄]₂ were isolated from the ionic liquid [BMIM]Cl/AlCl₃ ([BMIM]⁺: 1‐n‐butyl‐3‐methylimidazolium) and characterized. Black, cube‐shaped crystals of [Mo₂Te₁₂]I₆, which is not accessible by conventional chemical transport reaction, were obtained by reaction of the elements at room temperature in [BMIM]Cl/AlCl₃. The monoclinic structure (P2₁/n, a = 1138.92(2) pm, b = 1628.13(2) pm, c = 1611.05(2) pm, β = 105.88(1) °) is homeotypic to the triclinic bromide [Mo₂Te₁₂]Br₆. In the binulear complex [Mo₂Te₁₂]⁶⁺, the molybdenum(III) atoms are η⁴‐coordinated by terminal Te₄²⁺ rings and two bridging η²‐Te₂^2– dumbbells. Despite the short Mo···Mo distance of 297.16(5) pm, coupling of the magnetic moments is not observed. The paramagnetic moment of 3.53 μ_B per molybdenum(III) atom corresponds to an electron count of seventeen. Black crystals of monoclinic Te₆[WOCl₄]₂ are obtained by the oxidation of tellurium with WOCl₄ in [BMIM]Cl/AlCl₃. Tellurium and tellurium(IV) synproportionate in the ionic liquid at room temperature yielding violet crystals of orthorhombic Te₄[AlCl₄]₂.     

Molybdenum-Containing polysalts of the poly[ferricene-1,2(1,3:1,1′)diyl-methylene] cation

Poly(ferricene-1,2(1,3:1,1′)diyl-methylene) polycations, generated from the neutral precursor polymer 1 (M?_n=2800) by dioxygen (O₂) oxidation in sulfuric acid medium, are paired first, in a model reaction, with the hexafluorophosphate anion and, in the principal series of experiments, with the two molybdenum-containing complex anions, octamolybdate and phosphododecamolybdate. The model poly(hexafluorophosphate) 2b, as well as the polymolybdates 2c and 2d, precipitate from aqueous acidic solution of the corresponding polysulfate 2a after anion exchange; scopically. In addition to the hexafluorophosphate anion, the model polysalts 2b contain small proportions, typically 5-15%, of sulfate anion (probably present as HSO), indicating incompleteness of the anion exchange process. Analytical data suggest similarly incomplete exchange of anions also for the polymolybdates 2c and 2d. Oxidation of ferrocene units along the polymer chain is practically complete in the great majority of polysalts 2 synthesized. The molybdenum-containing polymers are of interest as plant micronutrients possessing slow-release properties.     

Modulation of interaction of polycations with negative unilamellar lipid vesicles

Interactions of small unilamellar negative vesicles composed of diphosphatidylglycerol (cardiolipin, CL²⁻), 20 mol%, and phosphatidylcholine (egg yolk lecithin, EL), 80 mol%, with various cationic polymers (CP) derived from poly(4-vinylpyridine) (PVP) were studied in water and water–salt solutions by means of photon correlation spectroscopy, microelectrophoresis, conductometry, and fluorescence techniques. The linear charge density and hydrophilic lipophilic balance of CPs were varied by quaternization of PVP with various amounts of different alkyl bromides (ethyl-(2), heptyl-(7), dodecyl-(12), cetyl-(16)). Substantial differences were observed in the behavior of exhaustingly N-ethylated PVP (CP2) and PVP N-ethylated to 50 mol% (CP2(50)) or 30 mol% (CP2(30)). All of them adsorb to the CL²⁻/EL vesicle membrane, neutralizing the surface negative charge and causing aggregation of the vesicles. However, CP2, a polycation with a maximum linear charge density, strongly enhances transfer of the negative lipid ions from the inner to outer bilayer leaflet, while CP2(50) and CP2(30) do not. Adsorbed CP2 does not disturb integrity of the vesicle membrane and can be completely removed from the surface of aggregated vesicles by adding a simple salt (NaCl) or a negative linear polyelectrolyte (polyacrylic acid (PAA) sodium salt). Such removal is followed by release of the original vesicles. In contrast to that, adsorbed CP2(50) or CP2(30) produce some leak through the lipid bilayer and cannot be completely desorbed either by increasing ionic strength or adding an excess of PAA. The probable reason of these differences is discussed. PVP partially N-alkylated with dodecyl or cetyl bromides (3 mol%) and then completely N-ethylated (CP2,12 and CP2,16), also having a maximum linear charge density, adsorbs to the negative vesicle surface as a result of both electrostatic binding and hydrophobic interaction. Bulky hydrocarbon pendant groups incorporate into the inner bilayer compartment. Similarly to CP2(50) and CP2(30), CP2,12 and CP2,16 cannot be removed from the surface either by adding the simple salt, or an excess of PAA. However, in contrast to CP2(50) and CP2(30), the polycations with the bulky hydrocarbon pendant groups do not cause any leak through the vesicle membrane. Finally, we have succeeded to prepare the ternary vesicles also composed of 20 mol% of CL²⁻, but partially replacing EL for polyoxyethylene 20 cetyl ether (Brij 58) (up to 30 mol%). The CL²⁻/EL/Brij vesicle carries a hydrophilic corona formed by polyoxyethylene chains exposed into water, while hydrophobic cetyl radicals are incorporated in the lipid bilayer. The CL²⁻/EL/Brij vesicles adsorb all studied CPs similar to the binary CL²⁻/EL vesicles. This means that polyoxyethylene corona is permeable for polycationic species restricting neither electrostatic binding nor incorporation of bulky hydrocarbon groups of CP2,16 into the membrane. However, the corona effectively stabilizes the CP-vesicle complexes against aggregation when the membrane surface is neutralized.     

Cyclophosphazenes tethered together via N-ring centres with ortho-, meta- and para-xylylene linkers

Hexakis (organoamino) cyclotriphosphazenes (RNH)₆P₃N₃ {R = i-Bu (1), R = i-Pr (2)} react with ortho-, meta- and para-derivatives of α,α′-dibromo xylene in 2:1 ratio to form salts of compositions [{(RNH)₆P₃N₃}₂xyl]Br₂, {R = i-Bu, o-xyl (3); R = i-Pr, m-xyl (4); R = i-Pr, p-xyl (5)}. These contain dications consisting of two phosphazene rings, which are tethered together via ring N centres by a xylylene unit. X-ray structure analyses show that the substitution pattern at the xylylene bridge controls the orientation and distance between the two tethered phosphazene rings. The solid state structures exhibit dense networks of hydrogen bonds linking dications and anions. Direct N-H?N bonds between dications are observed in the crystal structure of 3.     

Preparation of Fe3O4/poly(styrene-butyl acrylate-[2-(methacryloxy)ethyl]trimethylammonium chloride) by emulsifier-free emulsion polymerization and its interaction with DNA

Cationic magnetic polymer particles Fe₃O₄/poly(styrene-butyl acrylate-[2-(methacryloxy)ethyl]trimethylammonium chloride), a type of potential gene carrier, were prepared by emulsifier-free emulsion polymerization with oleic acid modified magnetite Fe₃O₄, styrene, butyl acrylate and [2-(methacryloxy)ethyl]trimethylammonium chloride) (METAC). The morphology of the particles was characterized by transmission electron microscopy and the composites of particles were characterized by FT-IR spectroscopy, X-ray diffraction. These results showed that magnetic particles were well dispersed in polymers with the content of about 15%(wt/wt). The composites exhibited superparamagnetism and possessed a certain level of magnetic response. The interactions between the particles with calf-thymus DNA (ct DNA) were confirmed by zeta potential measurement, UV-vis spectroscopy and fluorescence spectroscopy. The DNA-binding capacity determined by the agarose gel electrophoresis showed good binding capacity of the emulsion to DNA. These results suggested the potential of the cationic magnetic polymer emulsion as gene target delivery carrier.     

Charge Makes a Difference: Molecular Ionic Bismuth Compounds

Key challenges in modern synthetic chemistry include the design of reliable, selective, and more sustainable synthetic methods, as well as the development of promising candidates for new materials. Molecular bismuth compounds offer valuable opportunities as they show an intriguing spectrum of properties that is yet to be fully exploited: a soft character, a rich coordination chemistry, the availability of a broad variety of oxidation states (at least +V to −I) and formal charges (at least +3 to −3) at the Bi atoms, and reversible switching between multiple oxidation states. All this is paired with the status of a non-precious (semi−)metal of good availability and a tendency towards low toxicity. Recent findings show that some of these properties only come into reach, or can be substantially optimized, when charged compounds are specifically addressed. In this review, essential contributions to the synthesis, analyses, and utilization of ionic bismuth compounds are highlighted.