Improvement of gas meter performance using polymer materials

The measuring elements of both dry‐ and wet‐type gas meters are composed of a diaphragm and rotary drum. In this article an explanation on the principle of measuring and the structure of the gas meter for each of these two types was discussed. Such applications were made as follows: synthetic rubber was used for the measuring diaphragm, engineering plastic was employed instead of metal for the measuring drum, and poly(butylene terephthalate) (PBT) was used for the casing, respectively. As a result, an improvement in the gas resistance performance and productivity, which led to a lighter weight, more compactness and a lower cost of productions was achieved. Also the influence of the solubility of the measured gas to the plastic on the measured valve was discussed. Copyright © 2003 John Wiley & Sons, Ltd.     

Synthesis and blending behavior of an oligoarylenevinylene. Design towards processable materials for LED applications

A bisstyrenebenzene with improved solubility can be obtained by a lateral phenyl substituent on the phenylene ring. The phenyl substituted bisstyrenebenzene (PBSB) was synthesized by Pd-catalyzed coupling of 2,5-dibromobiphenyl and styrene. PBSB exhibits blue fluorescence in solution. Blends of PBSB and polystyrene or polycarbonate are homogeneous over a wide concentration range of PBSB, based on differential scanning calorimetry (DSC) and scanning electron microscopy (SEM). The results were compared with the blending behavior of unsubstituted bisstyrenebenzene.     

Theoretical and experimental approaches to kinetics at the collapse transition of a homopolymer

Summary We discuss some recent theoretical studies of the kinetics of the collapse transition in homopolymers. An isolated polymer is modelled using computer simulation, and a time-dependent mean-field theory. The mean-field theory is analysed analytically for early stages, and for short polymers the equations are studied numerically. The results of simulation and theory are compared yielding, we argue, a consistent physical picture. Quantitative comparisons are not yet given, but seem relatively promising. Paper presented at the I International Conference on Scaling Concepts and Complex Fluids, Copanello, Italy, July 4– 1994.     

Analysis of the crystallization kinetics in poly(ethylene oxide) by calorimetric measurements

Summary Differential scanning calorimetric measurements in the early stage of isothermal crystal growth of polyethylene oxide are analysed in the light of irreversible thermodynamics. An accurate evaluation of the equilibrium melting temperature is done by fitting the thermograms obtained at different undercoolings and referring to the activation energy values already known from the literature. Paper presented at the I International Conference on Scaling Concepts and Complex Fluids, Copanello, Italy, July 4–8, 1994.     

The effect of crystallinity on chain mobility and free volume in the amorphous regions of a miscible polycarbonate/polyester blend

Homopolymers and blends of polycarbonate/ThermX have been investigated by differential scanning calorimetry, dynamic mechanical analysis, density measurements, and positron annihilation lifetime spectroscopy. The study focuses on the chain mobility and free volume in the amorphous miscible regions of the blends and how this mobility and free volume are affected by increasing crystallinity. It is proposed that judicious annealing, which results in increasing crystallinity (while avoiding ageing or transesterification), induces a constraint on the amorphous region leading to an increase in T_g and coalescence of free volume sites. © 1994 John Wiley & Sons, Inc.     

SHI induced modification in CR-39 polycarbonate by positron annihilation lifetime studies

CR-39 is a polycarbonate widely used as SSNTD for recording nuclear charged particles and in other applications. Latent ion tracks produced in the polymers due to the damage produced by the passage of Swift Heavy Ions contain amorphous material with highest degree of disorder, changing the free volume properties which have strong correlation with the macroscopic properties of the material. Positron annihilation lifetime spectroscopy (PALS) provides direct information about the dimension, content and hole size distribution of free volume in polymers. The effect of irradiation of ⁴⁰Ar (14.9 MeV/n) ions on CR-39 polycarbonate by Positron Annihilation Lifetime Spectroscopy (PALS) is reported here. PALS provides a non-destructive and non-interfering probe, having high detection efficiency for free volume hole properties. From o-Ps lifetime mean free volume hole radius and average free volume of the micro-voids have been calculated. PAL measurement shows an increase in free volume on irradiation.     

Standardization and certification in the area of environmentally degradable plastics

Environmentally degradable polymers and plastics (EDPs) are a group of polymeric materials experiencing a rapid growth in number as well as in their applications and quantities used. The assessment of their key characteristic - degradability, including eventually biodegradability as the ultimate stage, is scientifically and technically a challenging issue and has led to differing interpretations in the past. In order to standardize techniques and criteria a number of standards were established by different standardization bodies which are also used as a basis for certification schemes. An up-to-date inventory of the rapidly growing standardization body is presented with basic interpretation to help guide the non-expert. A basic introduction to EDPs and polymer degradation is added for clarity.     

New PVC materials for medical applications—the release profile of PVC/polycaprolactone–polycarbonate aged in aqueous environments

Medical grade PVC plasticised with polycaprolactone–polycarbonate (PCL–PC) was subjected to aqueous environments at different temperatures. The release profile during ageing was determined by solid phase microextraction (SPME) and GC–MS. At the same time changes in the surface composition due to, for example, migration of PCL–PC from the blend were followed by FTIR. Almost no changes in the material or its surface composition were observed during 98 days at 37 °C in water or phosphate buffer. Only trace amount of 6-hydroxyhexanoic acid the final hydrolysis product of PCL–PC was detected in the GC–MS chromatograms and the weight loss was negligible. Even when the ageing temperature was raised to 70 °C only minor increase in the amount of 6-hydroxyhexanoic acid was observed and the weight loss after 98 days was under 1%. Changes in the FTIR spectra indicating migration of PCL–PC towards the surface of the PVC/PCL–PC tubing were observed first after 70 days at 70 °C. Large increase in the hydrolysis rate of PCL–PC and almost complete depletion of PCL–PC from the blend was observed when the ageing temperature was raised to 100 °C.     

Tribological properties of ormosil coatings

Transparent plastics are not scratch resistant. The damage leads to a loss of optical properties. Coatings prepared using either tetraethoxysilane or colloidal silica particles embedded in glymo is a way to avoid these disadvantages. Tribological experiments are carried out to better understand the surface modification due to a sliding friction. It is shown that the wear track is not directly related to usual mechanical properties such as Young's modulus and the hardness of the coating. The different stages leading to material loss are discussed in term of particle removal and debris circulation (accumulation or elimination) through the friction track. The mechanical properties of the film combined with the film to substrate adhesion are expected to play an important role as it can be deduced from results obtained as a function of the coating composition.