Experimental design and the optimization of a polymer supported palladium complex for use in the Heck reaction

Optimization of the Heck reaction of 4-bromoacetophenone with styrene by a polymer supported, sulfur-containing palladacycle, varying 6 factors at a total of 28 different levels, corresponding to 5760 different possibilities was undertaken. Conversion improved from 34%, with large observable leaching to 88% with no leaching. This was accomplished using a Design of Experiments approach facilitated by the Statistical Design Package, MODDE 7.0^TM.     

混合位级正交试验设计的极差分析方法

本文指出，在混合位级的正交试验设计中，以往的极差分析方法存在着不足。本文给出了极差的修正方法，并用大量实例做了数值验证，说明这个修正确实很有效     

Dextran-modified iron oxide nanoparticles

Dextran-modified iron oxide nanoparticles were prepared by precipitation of Fe（Ⅱ） and Fe（Ⅲ） salts with ammonium hydroxide by two methods. Iron oxide was precipitated either in the presence of dextran solution, or the dextran solution was added after precipitation. In the second method, the iron oxide particle size and size distribution could be controlled depending on the concentration of dextran in the solution. The nanoparticles were characterized by size-exclusion chromatography, transmission electron microscopy and dynamic light scattering. Optimal conditions for preparation of stable iron oxide colloid particles were determined, The dextran/iron oxide ratio 0-0,16 used in precipitation of iron salts can be recommended for synthesis of nanoparticles suitable for biomedical applications, as the colloid does not contain excess dextran and does not coagulate.     

Scheduling orders for multiple product types to minimize total weighted completion time

We consider the problem of scheduling orders for multiple different product types in an environment with m dedicated machines in parallel. The objective is to minimize the total weighted completion time. Each product type is produced by one and only one of the m dedicated machines; that is, each machine is dedicated to a specific product type. Each order has a weight and may also have a release date. Each order asks for certain amounts of various different product types. The different products for an order can be produced concurrently. Preemptions are not allowed. Even when all orders are available at time 0, the problem has been shown to be strongly NP-hard for any fixed number (?2) of machines. This paper focuses on the design and analysis of efficient heuristics for the case without release dates. Occasionally, however, we extend our results to the case with release dates. The heuristics considered include some that have already been proposed in the literature as well as several new ones. They include various static and dynamic priority rules as well as two more sophisticated LP-based algorithms. We analyze the performance bounds of the priority rules and of the algorithms and present also an in-depth comparative analysis of the various rules and algorithms. The conclusions from this empirical analysis provide insights into the trade-offs with regard to solution quality, speed, and memory space.     

Sensitivity of depolarized lidar signals to cloud and aerosol particle properties

Measurements from depolarized lidars provide a promising method to retrieve both cloud and aerosol properties and a versatile complement to passive satellite-based sensors. For lidar observations of clouds and aerosols, multiple scattering plays an important role in the scattering process. Monte Carlo simulations are carried out to investigate the sensitivity of lidar backscattering depolarization to cloud and aerosol properties. Lidar parameters are chosen to be similar to those of the upcoming space-based CALIPSO lidar. Cases are considered that consist of a single cloud or aerosol layer, as well as a case in which cirrus clouds overlay different types of aerosols. It is demonstrated that besides thermodynamic cloud phase, the depolarized lidar signal may provide additional information on ice or aerosol particle shapes. However, our results show little sensitivity to ice or aerosol particle sizes. Additionally, for the case of multiple but overlapping layers involving both clouds and aerosols, the depolarized lidar contains information that can help identify the particle properties of each layer.     

Improved holographic particle sizing by using absolute values of the wavelet transform

A new method for sizing particle from in-line particle holograms by using absolute values of the wavelet transform is proposed in order to improve accuracy in measurements. The proposed method provides direct calculation of the particle size by using spatial frequency information of a chirp signal at minima position of an envelope function. Simulation and experimental results are presented.     

短脉冲强激光在稀薄等离子体中传播时的电磁类孤立子

 采用二维粒子模拟方法，研究了短脉冲强激光在稀薄等离子体中传播时电磁类孤立子的产生和时空演化过程。通过分析电磁场与等离子体波的非线性能量交换和激光场的频率谱结构等，给出了电磁类孤立子形成的基本物理图像，讨论了等离子体参数对电磁类孤立子形成的影响。模拟结果表明：类孤立子的形成是由于局部电磁波振荡频率减小至等离子体频率引起的，初始等离子体密度越高越容易形成空间局域结构。     

偏滤器靶板磁预鞘层边界的离子流

利用流体力学模型研究了偏滤器等离子体条件下磁预鞘层边界离子流和预鞘层宽度之间的关系，并分析了粒子碰撞对预鞘层边界离子流的影响。由于粒子碰撞对离子的驱动效益，预鞘层边界离子流速度随着预鞘层宽度的增加而减少；只有当预鞘层宽度趋于零时，边界离子流沿磁力线的速度才趋近于离子声速。在固定预鞘层宽度的条件下，计算了预鞘层边界离子流速度与碰撞频率之间的函数关系。     

Structural optimization design for large mirror

The system design must be started from the concept with low cost and high performance. In this point, the topological shape of the structure is very important in the view of the structural rigidities and light-weight design.In this paper, the optimization methodology is presented in the design stage of the large optical mirror. We obtain the optimal layout through the topology optimization and then design the details through the size or shape optimization for structural rigidity.