Soluble,saturated‐red‐light‐emitting poly(p‐phenylenevinylene) containing triphenylamine units and cyano groups

A conjugated poly(p‐CN‐phenylenevinylene) (PCNPV) containing both electron‐donating triphenylamine units and electron‐withdrawing cyano groups was prepared via Knoevenagel condensation in a good yield. Gel permeation chromatography suggested that the soluble polymer had a very high weight‐average molecular weight of 309,000. A bright and saturated red emission was observed under UV excitation in solution and film. Cyclic voltammetry showed that the polymer presented quasi‐reversible oxidation with a relatively low potential because of the triphenylamine unit. A single‐layer indium tin oxide/PCNPV/Mg–Ag device emitted a bright red light (633 nm). © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3947–3953, 2004     

Electronic spectral and photophysical properties of some p-phenylenevinylene oligomers in solution and thin films

A comprehensive photophysical and spectroscopic study of a new class of p-phenylenevinylene oligomers (PPV-trimers) possessing different alkyl and alkyloxy sidechain substituents and different end groups (aldehyde, CC, phenylene and anthracene units) was undertaken in solution at room temperature (293 K), low temperature (77 K) and in thin films. The study comprises absorption, emission and triplet–triplet absorption spectra, together with quantitative measurements of quantum yields (fluorescence, intersystem crossing, internal conversion and singlet oxygen formation) and lifetimes. The data allow the determination of rate constants for all decay processes. From these, several conclusions could be drawn. Changing from alkyl to alkyloxy substituents does not change fluorescence and internal conversion yields but decreases the (already small) intersystem crossing yield. The introduction of anthracene at the terminal ends of the PPV-trimers leads to the lowest fluorescence yield reported in this study. Of particular importance is the fact that the fluorescence quantum yields in films are of the same order of magnitude as those in solution, which suggests the potential for use of these oligomers for light-emitting device applications. With one of the alkyloxy derivatives, a more detailed study of the early part of the fluorescence decay was made, and it was found that upon excitation a fast conformational relaxation process of the initially excited oligomer occurs, leading to a more planar conjugation segment.     

有序自组装聚合物纳米结构

采用水辅助方法(water-assisted fabrication method),分别以4-十二烷基苯磺酸掺杂的聚苯胺(PANI-DBSA)和聚2-甲氧基-5-(2′-乙烯基-己氧基)苯乙炔(MEH-PPV)两种功能高聚物为成膜材料,冷凝水滴为模板,利用水滴在聚合物溶液表面的自组装,制备出了两种纳米层次以上的蜂窝状有序多孔聚合物薄膜.通过原子力显微镜和共聚焦荧光显微镜对其形貌、电学性质和荧光图像进行了表征.     

Preparation of symmetrical and unsymmetrical monomers towards bridge trifluoromethylated poly(p-phenylenevinylene)

The preparation and identification of a series of trifluoromethylated and bis(trifluoromethylated) precursors and monomers for bridge substituted trifluoromethylated poly(p-phenylenevinylene) (PPV) is reported. These monomers were prepared in several steps from terephthaldicarboxaldehyde and they contain symmetrical and unsymmetrical combinations of leaving groups and/or polarizers, including chlorides, sulfoxides, sulphones, tosylates and S-methyl (and also O-ethyl) xanthates. The electron withdrawing effect of the trifluoromethyl group dominated the regioselectivity of substitution, thus allowing the convenient and selective formation of unsymmetrically substituted products in high yield.     

The influence of preparation method of OC1OC6-PPV films on the photo-oxidation process

Poly(p-phenylene vinylene) (PPV) derivatives are well known for their applications in polymer light emitting diodes (PLEDs). PPV derivatives are highly susceptible to photo-oxidation though, which is mainly caused by the scission of the vinyl double bond on the polymer backbone. In this work, we show that Langmuir-Blodgett (LB) films are less degraded than cast films of a PPV derivative (OC₁OC₆-PPV). Both films had similar thickness (∼50 nm) to allow for a more realistic comparison. Degradation was monitored with UV-vis and FTIR spectroscopies. The results indicated that cast films were completely degraded in ca. 400 min, while LB took longer time, i.e. about four times the values for the cast films. The differences can be attributed to the more compact morphology in the LB than in the cast films. With a compact morphology the diffusion of oxygen in the LB film is hampered and this causes a delay in the degradation process.     

BBDMS-PPV/ITO界面结构ADXPS研究

聚合物电致发光器件（Polymer Electroluminescent Device,PLED)已显示出广阔的应用前景^[1-6]。已往人们比较重视阴极材料的选择及相关金属与有机界面的研究^[7],而有关发光层或空穴传输层与阳极ITO膜之间的界面结构及化学问题则少见报道。事实上,ITO膜与有机层之间的作用对器件的可靠性及寿命具有更为严重的影响^[8,9]。由于异质界面的过渡层结构复杂,以纳米尺度上化学组成是非计量比的,因此对这种极薄的埋藏界面的研究方法还需进一步探索。本文通过模型试样制备和变角X射线光电子谱（ADXPS）技术,对PLED中共轭导电聚合物聚2,5－二（二甲基正丁基硅基）对苯乙烯撑（BBDMS－PPV）与阳极ITO膜所形成的界面结构进行了初步研究。     

Novel Covalently Linked Self-Assembled Films from a Functional Hyperbranched Conjugated Poly(Phenylene Vinylene)

The hotSPOt in the fields of molecular films focuses on highly ordered, ultrathin filmswith molecularly controllable surface properties. It is attractive tO stUdy supramolecularfunctional POlymeric materials with suitable physical properties and abilities to formorganized superstrUctures at the interfacesl'2'3A. Dendritic macromolecules are a kind ofmaterials which is capable of self-organizing into superstrUctUres'. So a new dendrimerlike POly(Phenylene vinylene)- --hyperbranched conj "…     

High‐quality poly[2‐methoxy‐5‐(2′‐ethylhexyloxy)‐p‐phenylenevinylene] synthesized by a solid–liquid two‐phase reaction: Characterizations and electroluminescence properties

Poly[2‐methoxy‐5‐(2′‐ethylhexyloxy)‐p‐phenylenevinylene] (MEH‐PPV) with a molar mass of 26–47 × 10⁴ g mol^?1 and a polydispersity of 2.5–3.2 was synthesized by a liquid–solid two‐phase reaction. The liquid phase was tetrahydrofuran (THF) containing 1,4‐bis(chloromethyl)‐2‐methoxy‐5‐(2′‐ethylhexyloxy)benzene as the monomer and a certain amount of tetrabutylammonium bromide as a phase‐transfer catalyst. The solid phase consisted of potassium hydroxide particles with diameters smaller than 0.5 mm. The reaction was carried out at a low temperature of 0 °C and under nitrogen protection. No gelation was observed during the polymerization process, and the polymer was soluble in the usual organic solvents, such as chloroform, toluene, THF, and xylene. A polymer light‐emitting diode was fabricated with MEH‐PPV as an active luminescent layer. The device had an indium tin oxide/poly(3,4‐ethylenedioxylthiophene) (PEDOT)/MEH‐PPV/Ba/Al configuration. It showed a turn‐on voltage of 3.3 V, a luminescence intensity at 6.1 V of 550 cd/m², a luminescence efficiency of 0.43 cd/A, and a quantum efficiency of 0.57%. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3049–3054, 2004     

Field‐effect transistors based on PPV derivatives as a semiconducting layer

A series of modified thiophene groups containing PPV‐based semiconducting materials, poly[(2,5‐bis(octyloxy)‐1,4‐phenylenevinylene)‐alt‐(2,2′bithienylenevinylene)] ( PPBT ), poly[(2,5‐bis(octyloxy)‐1,4‐phenylenevinylene)‐alt‐(5,5‐thiostilylenevinylene)] ( PPTVT ), have been synthesized through a Horner coupling reaction. From the FTIR and ¹H NMR spectroscopy, the configuration of the vinylene groups in the polymers was all trans (E) geometry. The weight‐average molecular weights (M_w) of PPBT and PPTVT were found to be 11,700 and 11,800, with polydispersity indices of 2.51 and 2.53, respectively. PPBT and PPTVT thin films exhibit UV–visible absorption maxima at 538 and 558 nm, respectively, and the strong absorption shoulder peaks at 578 and 602 nm, respectively. Solution processed field‐effect transistors (FET) fabricated using all the polymers showed p‐type OTFT characteristics. The field‐effect mobility of the PPTVT was obtained up to 2.3 × 10^?3 cm² V^?1 s^?1, an on/off ratio of 1.0 × 10⁵ with ambient air stability. Studies of the atomic force microscopy (AFM) and X‐ray diffraction (XRD) analysis of the polymer thin films revealed that all the polymers were amorphous structure. The greater planarity and rigidity of PPTVT compared to PPBT results in elongation of conjugation length and better π–π stacking of polymer chains in amorphous region, which leads to improved FET performance. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 111–120, 2009