Stainless steel capillary columns for high temperature gas chromatography

A layer of elemental silicon has been deposited on the surface of stainless steel tubing by means of chemical vapor deposition (CVD). Two kinds of capillary column were prepared from the deactivated tubing: cross-linked, silanol-terminated polydime-thylsiloxane wall coated open tubular (WCOT) columns and molecular sieve 13X porous layer open tubular (PLOT) columns. Unlike fused silica capillary columns, stainless steel WCOT and PLOT columns can be operated at temperatures in excess of 400°C. High temperature simulated distillation has been performed successfully with a macro bore WCOT column and rapid PNA (paraffin, naphthene, and aromatic) analysis with a multidimensional gas solid chromatographic (GSC) system using PLOT columns.     

PoraPLOT Q: A porous layer open tubular column coated with styrene-divinylbenzene copolymer

A porous polymer is deposited on the inner wall of fused silica capillary columns. The retention characteristics of this porous polymer were evaluated and found to be comparable with Porapak Q. The porous polymer has a high retention volume which enables the separation of permanent gases at ambient temperatures or higher. The hydrophobic character of the porous polymer allows the injection of water containing samples without changing retention due to adsorption of water. The inertness of the porous polymer allows the elution of a range of apolar and polar compounds. The maximum temperature of the porous polymer was estimated to be 250°C. With this new type of capillary column, high resolution separations are obtained in combination with short analysis times.     

原位合成分子筛膜毛细管色谱柱的研制

吸附型多孔层毛细管柱既耐高温又对气体及烃类异构体有选择性，同时又具有毛细管色谱快速、高效等优点，是解决难分离组分的重要柱型．常用作气一固吸附色谱固定相的有强极性的硅、中极性的氧化铝、非极性的碳质及特殊吸附作用的分子筛．其中分子筛以其独特的吸附作用，在永久性气体和烃类碳数族组成分析中有重要地位．Pruecell和Soulages[1，2]等制备了涂渍型5A和13X型分子筛的毛细管柱，对低碳烃类化合物显示了良好的分离能力，分析柱温较填充柱降低约100℃．邹乃忠等[3～5]也先后制备了分子筛层的毛细管柱用来作直馏汽油的分析．由于通…     

Separation of intact proteins on porous layer open tubular (PLOT) columns

Porous layer open tubular (PLOT) polystyrene divinylbenzene columns have been used for separating intact proteins with gradient elution. The 10 μm I.D. × 3 m columns were easily coupled to standard liquid chromatography–mass spectrometry (LC–MS) instrumentation with commercially available fittings. Standard proteins separated on PLOT columns appeared as narrow and symmetrical peaks with good resolution. Average peak width increased linearly with gradient time (t_G) from 0.14 to 0.33 min (t_G 20 and 120 min, respectively) using a 3 m column. With shorter columns, peak widths were larger and increased more steeply with gradient time. Theoretical peak capacity (n_c) increased with column length (tested up to 3 m). The n_c increased with t_G until a plateau was reached. The highest peak capacity achieved (n_c = 185) was obtained with a 3 m column, where a plateau was reached with t_G 90 min. The within- and between column retention time repeatabilities were below 0.6% and below 2.5% (relative standard deviation, RSD), respectively. The carry-over following injection of 0.5 ng per protein was less than 1.1%. The retention time dependence on column temperature was investigated in the range 20–50 °C. Proteins in a skimmed milk sample were separated using the method.     

A study on the preparation and characteristics of zeolite membrane PLOT column by in-situ synthesis

Summary The preparation of a zeolite membrane PLOT column by in-situ synthesis is described. The advantages of this new column are discussed. Some analytical applications to alkanes, arenes, esters, alkyl halides and ethers on the zeolite membrane PLOT column compared with those on a coated zeolite PLOT column are reported.     

Analysis of perfluoroalkanes and fluorobenzenes using an Al2 O3 porous-layer open-tubular column

Summary Many of the isomers of fluorocarbons have boiling points which are less than one degree different. Thus it is necessary to use some other basis for their separation on a chromatographic column. One such possibility is gas-solid chromatography. It has been demonstrated that an alumina porous-layer open-tubular (PLOT) column is especially well suited for the analysis of fluoroalkanes and fluorobenzenes. This column is useful for the specific application of the measurement of electron attachment properties of these molecules using the electron-capture detector because of thelack of column bleed.     

Review of recent advances in the preparation of organic polymer monoliths for liquid chromatography of large molecules

In recent years the use of monolithic polymers in separation science has greatly increased due to the advantages these materials present over particle-based stationary phases, such as their relative ease of preparation and good permeability. For these reasons, these materials present high potential as stationary phases for the separation and purification of large molecules such as proteins, peptides, nucleic acids and cells. An example of this is the wide range of commercial available polymer-based monolithic columns now present in the market.     

Development of a Dual Capillary Column GC Method for the Trace Determination of C2–C9 Hydrocarbons in Ambient Air

An analytical method based on a dual capillary gas chromatographic technique combining the advantages of GasPro PLOT and a non polar narrow bore WCOT column was developed for the analysis of air samples containing C2–C9 NMHCs. A refocusing step was not required due to the fast heating rate of the sample preconcentration trap and the resolving power of the PLOT column for C2 and C3 NMHCs. Water had to be removed from the air samples to avoid plugging of the columns if the initial GC oven temperature was below ambient temperature. To dry air samples, a scrubber and a cryogenic technique were employed. The interferences caused by carbon dioxide were reduced by purging the loaded sample preconcentration trap with helium. The dual column system was compared to a method employing a refocusing device and a single narrow bore WCOT column. Both systems provided a high degree of precision. However, the dual column approach was superior to the single column system due to better resolution of low molecular weight components.     

The influence of the carrier gas on retention in capillary gas-solid chromatography

In capillary gas-solid chromatography where interactions between solute and carrier gas and adsorption of the solute on the surface of the adsorbent are considered to be imperfect, it has been shown that chromatographic retention is determined largely by adsorption processes. It has been established that correlation relationships k(P₂)=A k(P₁) + B, where k is the retention factor, and A and B are equation constants, was valid for use of different carrier gases P₁ and P₂. Column efficiency could be improved by use of carbon dioxide. The advantages of using carbon dioxide as the carrier gas were investigated.