Moisture barrier of AlxOy coating on poly(ethylene terephthalate), poly(ethylene naphthalate) and poly(carbonate) substrates

The moisture barrier property of Al_xO_y coated poly(ethylene terephthalate) (PET), poly(ethylene naphthalate) (PEN) and poly(carbonate) (PC), have been investigated. The differences in the morphology of the Al_xO_y sputtered grown on these substrate were investigated using atomic force microscopy (AFM). The initial growth of the Al_xO_y followed closely the topology of the substrate and an amplified roughness was observed. In the fully grown Al_xO_y, the comparative roughness followed that of the substrates. It has been found that a single layer Al_xO_y improved the moisture barrier of PET by an order of magnitude, PC by two orders of magnitude while no improvement was observed for PEN. UV-ozone treatment on PC further improved the moisture barrier, while no improvement was observed for PET and PEN. The comparative effects of the substrate surface roughness and surface energy on the moisture barrier are discussed.     

Calorimetric study of Diepoxide Chain-Extended Poly(Ethylene Terephthalate)

A series of chain-extended PET samples were obtained by the use of different amounts of a diepoxide as chain extender, which was prepared for this purpose. These samples exhibited different intrinsic viscosities and degrees of branching or cross-linking. The effects of this differentiation on the thermal properties were studied by differential scanning calorimetry. The thermal parameters studied were the glass transition temperature (T_g), the cold-crystallization temperature (T_cc), the melting temperature (T_m), the enthalpy (ΔH_m) and the degree of crystallinity. The data revealed that, the higher the quantity of chain extender or the chain extension time, the higher T_gand T_cc, but the lower T_mand ΔH_m, i.e. the more amorphous the chain-extended samples, as also shown by density measurements. This revised version was published online in July 2006 with corrections to the Cover Date.     

聚苯基膦酸二苯砜酯对PET凝聚相阻燃作用的研究

采用热重分析、Ｘ－射线光电子能谱和红外光谱分析等手段，研究了含聚苯基膦酸二苯砜酯（ＰＳＰＰＰ）的聚对苯二甲酸乙二酯（ＰＥＴ）阻燃体系的热化学，探讨了ＰＳＰＰＰ对ＰＥＴ的阻燃机理．ＰＳＰＰＰ的加入，明显改变了ＰＥＴ的热分解行为：ＰＳＰＰＰ拓宽了ＰＥＴ的分解温度范围，降低了ＰＥＴ在可燃温度范围内的分解产物的量；在ＰＥＴ的点燃温度以下，ＰＳＰＰＰ对ＰＥＴ的降解起到一定的促进作用，而在点燃温度以上，产生的降解产物有利于促进炭化．４００℃以上，ＰＥＴ和ＰＳＰＰＰ的结构发生了明显的变化，所产生的结构有利于ＰＥＴ的降解，使ＰＥＴ的分子量急剧减小，粘度下降，易于形成熔滴，有利于促使着火部分离开火源，增加燃烧的ＰＥＴ表面的物质损耗和热损耗，起到阻燃作用．     

用FTIR定量测定聚对苯二甲酸乙二酯晶区和非晶区反式构象含量

用傅里叶变换红外分光光度计测定不同条件下退火处理的聚对苯二甲酸乙二酯膜的谱图, 用谱带分离技术对归属于反式构象的1340cm^-^1谱带进行阻尼最小两乘分峰处理, 结合属左右式构象贡献的1454cm^-^1谱带, 用线性回归分析的方法获得晶区反式构象、非晶区反式构象、非晶区左右式构象的百分含量。     

Metal Nanoparticles on Stainless Steel Surfaces as Novel Heterogeneous Catalysts

The goal of this work was the development of a novel type of heterogeneous catalyst, consisting of bare metal nanoparticles on stainless steel foils, which can be shaped to any kind of architecture and, if necessary, heated electrically. Solutions of pre-prepared, ligand protected and monodispersed gold, palladium, platinum and rhodium nanoparticles were sprayed onto stainless steel foils, followed by the careful removal of the ligand molecules by an oxygen plasma treatment. Due to this, bare particles become irreversibly fixed on the steel support. It could be shown that the original particle sizes do not change during the plasma treatment. Foils, densely coated with the nanoparticles, were used for gas phase catalyses in a self-made reactor at room temperature or at 60 °C. Hydrogenation of 1,3-butadiene at 15 nm Pd and 2 nm Pt, CO oxidation at 16 nm, 8 nm and 1.4 nm gold and NO reduction with NH₃ at 2 nm Rh particles were performed, indicating that the novel catalysts might in principle be applicable in technical processes if the experimental conditions like form and temperature would be optimized. Dedicated to Professor Dieter Fenske on the occassion of his 65th birthday.     

Application of the essential work of fracture concept to nanostructured polymer materials

The first part of the paper deals with a critical discussion of the methodical basis of essential work of fracture (EWF) concept with respect to the specimen geometry (especially the notch depth) and application to polymers. In the second part, an in situ testing device, which combines a tensile testing machine with an optical strain-field measuring system, has successfully demonstrated possibility of characterization of fracture behaviour of polystyrene-polybutadiene block copolymers and block copolymer/homopolymer blends as examples of nanostructured polymer materials. It has been shown that knowledge of the time evolution of the strain field close to the crack tips leads to a simple verification of the basic precondition for the applicability of the EWF concept, the precondition “plastic zone coalescence-before-stable crack propagation”.     

乙烯-甲基丙烯酸共聚物离聚体在聚对苯二甲酸乙二酯中的相分离行为

聚对苯二甲酸乙二酯(PET)结晶速度很慢,通常加入成核剂来提高结晶速度。从专利文献来看,以离子聚合物为成核剂的例子也是很多的。离子聚合物与小分子成核剂的显著差别是:离子聚合物有一个很长的碳氢主链,其侧基为酸基,酸基被部分或全部地中和成盐。很明显,离子聚合物不象小分子成核剂那样能很好地分散在PET基体中,而是以独立的相存在。作为PET体系系列研究的继续,本文报道了离子聚合物Surlyn在PET中的相分离行为。     

涤纶织物热定型后动态力学行为

利用Rhcovibron DDV-II-EA型动态粘弹谱仪测试了PET平纹布在不同温度热定型后的布样及其经、纬纱的动态力学性质。发现布及其纱的动态力学-温度谱与原纤维的截然不同。在[Ε]-T 曲线上出现[Ε]峰,[Ε]_max值随织物热定型温度的增高呈指数下降,峰位向高温移动。同时在Ε’’-T曲线上出现双损耗模量峰,相应的松弛转变活化能相差半个数量级。初步分析认为,与织布过程及随后的织物热定型有关。     

A novel selective fluorescent chemosensor for Cu（Ⅱ）

A novel fluorescence enhancement Cu~(2 ) chemosensor derived from coumarin was prepared.Emission study found that it exhibits evident Cu~(2 )-amplified fluorescence prior to Co~(2 ),Pb~(2 ),Mg~(2 ),Mn~(2 ),Ni~(2 ),Zn~(2 ),Fe~(3 ),Ag~ and Cd~(2 ),and the largest emission enhancement factor is about 9 at a ratio of 2:1 (chemosensor 1/Cu~(2 )).     

Kinetics of poly(ethylene terephthalate) glycolysis by diethylene glycol. I. Evolution of liquid and solid phases

The kinetics of uncatalysed glycolysis, at 220 °C, of poly(ethylene terephthalate) (PET) by diethylene glycol (DEG) in high excess has been studied. An experimental device allowing good separation, at reaction temperature, of the solid and liquid phases was set up.The results suggest that PET is initially depolymerized in the slightly swollen solid phase, by glycolysis of the amorphous interlamellar chains. This mechanism continues until a solid phase of highly crystallized polyester is obtained.The internal tensions engendered by this chemical modification cause cracks, delamination and mechanical disintegration of the polymer. The transfer towards the liquid phase is then strongly accelerated and the solvolysis of the depolymerization products continues in the liquid phase, up to equilibrium.