PAN和PPN的HeI光电子能谱（PES）

给出了两个重要的大气污染化合物PAN和PPN的紫外光电子能谱（PES）。为了 指认PES谱,对两个分子实施了HF和OVGF方法的理论计算,并给出了它们各自的优 化几何构型、PES谱低电离能区的两个分离（PAN）为11.42 eV和12.07 eV;PPN为 11.08 eV和11.79 eV）被归于分子中主要体现“NO_2”基团贡献的最高占有分子轨 道（HOMO）和次最高占有分子轨道（SHOMO）电子电离作用结果。而PPN的第一电离 能11.08 eV低于PAN的11.42 eV,是由于PPN分子中增加的“CH_2”基团电子的给予 作用,这为PPN应具有较大的生物毒性提供合理的解释。     

Strukturuntersuchungen an naßersponnenen Polyacrylnitrilfasern nach der Gefriertrocknung

Zusammenfassung An unterschiedlich verstreckten und hydrothermisch nachbehandelten, danach gefriergetrockneten Polyacrylnitril-Gelfasern (PAN) wurden Messungen der Röntgenkleinwinkelstreuung (RKWS), Röntgenweitwinkelstreuung (RWWS) und Tieftemperatur-Gassorption (TTGA) durchgeführt. Die RKWS-Messungen zeigen, daß sowohl in den isotropen als auch in den orientierten Proben eine exponentialstatistische Verteilung der Form und Größe der Inhomogenitäten (Hohlräume, Cluster) vorliegt, welche durch die Kohärenzlängel _c bestimmt wird. Eine erhöhte Röntgenabsorption wurde bei den verstreckten Proben festgestellt. Die Analyse der aus der Kohärenzlänge und den Volumsanteilen der Phasen berechneten charakteristischen RK WS-Parameter (z.B. innere Oberfläche, Durchschußlänge) ergibt, daß jede Behandlung der Gelfasern eine Zu- oder Abnahme der etwa gleich großen Hohlräume verursacht (nucleotic change). Das relative Ausmaß dieser Veränderungen wird besprochen.Der Vergleich mit den Ergebnissen der TTGA an den gleichen Fasern zeigt, daß die Tendenzen bei der spezifischen Oberfläche und dem Porenvolumen (Zu- bzw. Abnahme) bei beiden Methoden annähernd gleich sind. Die Absolutwerte des Hohlraumvolumens unterscheiden sich aber z.T. um den Faktor 40. Dies führt zur Schlußfolgerung, daß mit der RK WS Faserbereiche als Hohlräume erfaßt werden, die bei der TTGA nicht angezeigt werden, weil sie für das Meßgas unzugänglich sind.

---

Structural studies on wet-spun freeze-dried polyacrylonitrile fibers

Summary Polyacrylonitrile fibers (PAN) were drawn to different extents, hydrothermally aftertreated, and at last freeze-dried. The products were studied by small angle X-ray scattering (SAXS), wide angle X-ray scattering (WAXS), and low temperature gassorption (LTGS). The SAXS data show that the shape and the size of the inhomogeneities (voids, clusters) have an exponential statistical distribution determined by the correlation lengthl _c, both in the isotropic fibers and in the fiber-oriented ones. It has also been observed that stretching always causes a higher X-ray absorption. An analysis of the characteristic SAXS parameters (e.g., internal surface, mean chord length), which were calculated from the correlation length and the volume fractions of the phases, evidences that in all samples an augmentation or diminution of the number of the voids with nearly the same shape and size takes place (nucleotic change). Its relative number has been pointed out.Comparison with the results of the LTGS investigations at the same fibers shows that the tendencies of the specific surface and porosity (increase, decrease) are approximately the same with both methods. However, the absolute values of void volume differ in some cases by the factor 40. This leads to the conclusion that the SAXS method records domains of these fibers as voids which are not registered by LTGS (voids not accessible for the gas).

Herrn em.o.Univ. Prof. Dr.Josef Schurz zum 70. Geburtstag gewidmet     

Polarographische Untersuchungen an Komplexbildnern in Abh?ngigkeit von der Stabilit?t ihrer Komplexe

Zusammenfassung Das polarographische Verhalten der Komplexliganden PAN, PAR und TAR in ihren Komplexen wurde untersucht: Das Halbstufenpotential hängt sowohl vom pK_D- und pH-Wert ab als auch von Komplexstruktur, Lösungsmittel, Leitelektrolyt, Tropfgeschwindigkeit und Spannungsvorschub. Einflüsse der Metallionenkonzentration konnten nicht beobachtet werden. Aus den Meßergebnissen wurde eine Gleichung abgeleitet, die unmittelbar auf robuste Komplexe angewendet werden kann.

---

Polarographic investigations on complexing agents in dependence on the stability of their complexesPart II

Summary The polarographic behaviour of the ligands PAN, PAR, TAR in their complexes was investigated: The halfway potential depends on pK_D- and pH-value and also on complex structure, solvents supporting electrolyte, dropping time and voltage feed. An influence of the metal concentration has not been observed. From the experimental results an equation has been derived, which can be applied directly to robust complexes.

Wir danken der Deutschen Forschungsgemeinschaft, Bonn-Bad Godesberg, dem Minister für Wissenschaft und Forschung des Landes Nordrhein-Westfalen, Landesamt für Forschung, sowie dem Verband der Chemischen Industrie, Fonds der Chemie, für Sachbeihilfen.     

The use of a polymer inclusion membrane in a paper-based sensor for the selective determination of Cu(II)

A disposable paper-based sensor (PBS) is described for the determination of Cu(II) in natural and waste waters at approximately 2 cents per measurement. The device makes use of a polymer inclusion membrane (PIM) to provide the selectivity for Cu(II). The PIM consists of 40 wt% di(2-ethlyhexyl) phosphoric acid (D2EHPA) as the carrier, 10 wt% dioctyl phthalate (DOP) as a plasticizer, 49.5 wt% poly(vinyl chloride) (PVC) as the base polymer and 0.5 wt% (m m⁻¹) 1-(2′-pyridylazo)-2-naphthol (PAN) as the colourimetric reagent. High selectivity under mildly acidic conditions (HCl, pH 2.0) is achieved for Cu(II) in the presence of frequently encountered metal ions in natural and waste waters such as Fe(III), Al(III), Zn(II), Cd(II), Pb(II), Ca(II), Mg(II), and Ni(II).     

Electrospun EGNPs reinforced precursor carbon nanofibril composites by using RSM

Response surface methodology (RSM),based on five‐level, four variable Box‐Benkhen technique was investigated for modeling the average fiber diameter of electrospun polyacrylonitrile (PAN) nanofibers. The four important electrospinning parameters were studied including applied voltage (kV), Berry's number, deposition distance from nozzle to collector (cm), and spinning angle (? in degree). The measured fiber diameters were in a good agreement with the predicted results by using RSM technique. High‐regression coefficient between the variables and the response (R² = 87.74%) indicates excellent evaluation of experimental data by second‐order polynomial regression model. The optimum PAN average fiber diameters of 208 and 37‐nm standard deviation were collected at 19 kV, Berry's number = 10, 25^° spinning angle, and 16‐cm deposition distance. The PAN/N,N‐dimethylformamide (DMF) polymer solution with the optimum weight concentration (10 wt.%) was selected to study the effect of dispersing exfoliated graphite nanoplatelets (EGNPs) in PAN/DMF solution on the electrospun EGNP/PAN fibril composite diameter. Five different EGNPs weight concentrations (2, 4, 6, 8, and 10 wt.%) were dispersed in the optimized PAN/DMF polymer solution. Morphology of EGNPs/PAN fibril composites and its distribution were investigated by scanning electron microscopy (SEM) to show the minimum fiber diameter for the above‐mentioned 5 wt. % of EGNPs. A minimum fibril composite diameter of 182 nm was obtained at 10 wt.% of EGNPs. Morphological characteristics of electrospun fibers and their distribution were tested by Raman spectroscopy, SEM, differential light scattering, and high‐resolution transmission electron microscopy.     

PAN分光光度法测定全珍珠水解液中微量铜

探讨了用Cu-1-(2-吡啶偶氮)-2-萘酚分光光度法测定珍珠水解液中微量铜的最佳条件.在HCl-KCl溶液介质中,十二烷基苯磺酸钠存在下,其表观摩尔吸光系数为1.42×104L·mol-1·cm-1,Gu2+含量在0-100μg/50m1范围服从比尔定律,检测限为0.5μg/dms.应用于珍珠水解液制备的工艺优化中指标控制,效果良好.     

NiSO_4改性对聚丙烯腈原丝及其碳纤维结构与性能的影响

碳纤维具有高比强度、高比模量、导电、耐热、自润滑等优异的综合性能,在纤维增强复合材料中得到了广泛的应用.可制备碳纤维的前驱体有人造丝、沥青、聚丙烯腈纤维、木质素、聚乙烯纤维、聚苯并噻唑(PBO)纤维等.但大多数高强碳纤维目前仍然是由聚丙烯腈纤维制备的,同时,许多工作都集中在更进一步提高碳纤维的机械性能.特别是在我国, 碳纤维质量与某些发达国家相比,还有较大的差距,急需解决的问题就是如何尽快研制出高力学性能的碳纤维.采用氨基硅氧烷、脂肪族羧酸[1]、CuCl[2]、KMnO 4[3]、CoCl2[4]等有机或无机化学试剂对聚丙烯腈原丝进行化学处理, 以改进最终碳纤维的结构与性能是一种有效的方法.国内在这方面的研究还很少.文献[1 ～4]中所采用的方法都是利用商业聚丙烯腈原丝在碳化前进行洗油、浸渍、洗涤烘干处理 ,增加了碳纤维制备的工序,同时,原丝损伤较大,在连续生产中难以适用.我们在原丝连续制备的同时采用NiSO4溶液浸渍处理聚丙烯腈纤维,本文主要研究了采用NiSO4浸渍改性后聚丙烯腈原丝及其碳纤维的结构与性能.研究表明,采用NiSO4在线浸渍改性聚丙烯腈原丝,生产工艺简单,且能有效地改进最终碳纤维的结构与性能.     

Low Temperature Preparation of Titania Coated PAN Fiber and Its Photocatalytical Property

Titania thin film was deposited successfully on polyacrylonitrile (PAN) fiber by the sol‐gel process with the assistance of tetraethyl silicate (TEOS) at low temperature. It was found that the densification and crystallization of the film was a result of the post‐treatment in boiling water because of the hydrolysis of the Si‐O‐Ti bonds and dissolution of the silica component formed in the film. XRD patterns revealed the existence of anatase phase in the continuous titania layer. The product, titania coated polyacrylonitrile fiber (TiO₂/PAN), showed a high photocatalytic property and good repetition on the photodegradation of methylene blue (MB). The proposed method is expected to be used for the preparation of novel photo‐catalysts based on thermally sensitive substrates.     

Diffusion Mechanism of As‐spun Polyacrylonitrile Fiber in a Dimethyl Sulfoxide‐Water Coagulation Bath

In this paper, the diffusion mechanism of as‐spun PAN fiber was investigated in dimethyl sulfoxide‐water by determining the dynamic compositions of the fibers and the diffusion coefficients of solvent and nonsolvent during coagulation. The diffusion process could be divided into two stages. Results showed that the first stage of the diffusion process was the most important during the whole process, which was fundamental to further study on the formation mechanism. Also, compared with wet spinning, the dry‐jet wet spinning method had the advantage of mild coagulating at a high jet‐stretch. At high concentrations, the diffusion coefficients increased and the ratio of solvent diffusion coefficient to nonsolvent diffusion coefficient decreased; an increasing temperature resulted in the increase of both diffusion coefficients with a decrease in their ratios. To some extent, for the PAN‐DMSO‐water system, the more the ratios D_s*/D_n* tended to 1, the more the cross‐section shapes of as‐spun PAN fiber tended to be circular.     

稀土镧在腈纶纤维化学镀银中的应用及其电化学性能

采用化学镀法(镀液中加入适量的稀土镧)在硅烷偶联剂改性后的腈纶纤维表面沉积金属银,由粒径分析、X射线衍射、扫描电子显微镜、阴极极化曲线以及循环伏安曲线等方法对其进行表征,研究了硝酸镧对化学镀银沉积速度、镀层质量和电化学性能的影响。结果表明,镀银液中加入适宜的硝酸镧,银的沉积速率和腈纶纤维表面银镀层的表面质量均有不同程度的提高。电化学测试表明,镀银液中增大硝酸镧的浓度(0～0.01 g/L),阴极极化曲线极化度增大,氧化还原峰的电流上升,电沉积的速度加快。