Transition‐Metal‐Free Trifluoromethylthiolation of N‐Heteroarenes

A general and efficient methodology for the direct transition metal free trifluoromethylthiolation of a broad range of biologically relevant N‐heteroarenes is reported employing abundant sodium chloride as the catalyst. This method is operationally simple, exhibits high functional group tolerance, and does not require protecting groups.     

Monte Carlo study of interfacial silicon suboxide layers and oxidation kinetics

A simple simulation scheme that simultaneously describes the growth kinetics of SiO₂ films at the nanometer scale and the SiO_x/Si interface dynamics (its extent, and spatial/temporal evolution) is presented. The simulation successfully applies to experimental data in the region above and below 10 nm, reproduces the Deal and Grove linear-parabolic law and the oxide growth rate enhancement in the very thin film regime (the so-called anomalous region). According to the simulation, the oxidation is governed mainly by two processes: (a) the formation of a transition suboxide layer and (b) its subsequent drift towards the silicon bulk. We found that it is the superposition of these two processes that produces the crossover from the anomalous oxidation region behavior to the linear-parabolic law.     

Chemoselective tetrahydropyranylation of alcohols and phenols using polystyrene supported aluminium chloride as a catalyst

A simple, efficient and highly chemoselective method for tetrahydropyranylation of alcohols and phenols has been developed by their reaction with 3,4-dihydro-2H-pyran at room temperature in the presence of a catalytic amount of polystyrene supported AlCl₃. The method is also highly selective for monoprotection of symmetrical diols.     

Studies of photooxidative degradation of poly(vinyl chloride)/poly(ethylene oxide) blends

The photooxidative degradation of blends (in a full range of compositions) of amorphous poly(vinyl chloride) (PVC) with semicrystalline poly(ethylene oxide) (PEO) in the form of thin films is investigated using absorption spectroscopy (UV–visible and Fourier transform infrared) and atomic force microscopy (AFM). The amount of insoluble gel formed as a result of photocrosslinking is estimated gravimetrically. It is found that the PVC/PEO blendsí susceptibility to photooxidative degradation differs from that pure of the components and depends on the blend composition and morphology. Photoreactions such as degradation and oxidation are accelerated whereas dehydrochlorination is retarded in blends. The photocrosslinking efficiency in PVC/PEO blends is higher than in PVC; moreover, PEO is also involved in this process. AFM images showing the lamellar structure of semicrystalline PEO in the blend lead to the conclusion that the presence of PVC does not disturb the crystallization process of PEO. The changes induced by UV irradiation allow the observation of more of the distinct PEO crystallites. This is probably caused by recrystallization of short, more mobile chains in degraded PEO or by partial removal of the less stable amorphous phase from the film surface. These results confirm previous information on the miscibility of PVC with PEO. The mechanism of the interactions between the components and the blend photodegradation are discussed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 585–602, 2004     

Synthesis and characterization of N-3-phenyl-2-propenoyl amino acids

Three N-3-phenyl-2-propenoyl amino acids were synthesized through interaction between 3-phenyl-2-propenoyl chloride and amino acids in alkaline with a high Yield.Structure of the products were identified by elemental analysis,IR and NMR spectroscopy.     

Nickel Chloride Promoted Glaser Coupling Reaction in Hot Water

A Glaser coupling reaction of terminal alkynes in the presence of nickel chloride withoutany organics and bases in hot water has been developed, which produces the correspondinghomo-coupling products in good yields.     

铁基添加剂增强细水雾灭火性能的实验研究

采用实验模拟的方法,研究了添加氯化亚铁的细水雾在不同添加剂浓度、不同喷头压力下,熄灭不同性质的液体池火的性能。实验结果表明:添加有氯化亚铁的细水雾,其灭火性能发生了显著变化。存在一个最佳的灭火浓度,其对应的灭火时间最短,耗水量最少,灭火效率最高。细水雾喷头的工作压力和燃料的性质也对细水雾的灭火性能有影响:工作压力越大,细水雾的平均灭火时间越短。在相同的实验条件下,细水雾扑灭煤油池火的时间要短于扑灭酒精池火的时间。     

Poly(vinyl chloride)-paste/clay nanocomposites: Investigation of thermal and morphological characteristics

The paper concentrates on poly(vinyl chloride) - PVC - from the point of nanocomposite characterisation through thermal degradation of samples, evolution of the changes caused by elevating temperature using TGA, FTIR and Congo Red methods combined with morphological characterisation by XRD and TEM analyses. A novel method of PVC-paste/nanocomposite preparation while processing was used. During preparation, PVC plasticizer was mixed with clay, both natural and organophilic, and the suspension was then compounded with the other components. Two factors were followed: effect of shearing alone, and in combination with temperature. As is presented, the type of nano-filler and its chemical modifier have obvious influence on final properties either thermal or morphological. Presented contribution follows previous part of investigation and brings further information from PVC-paste/nanocomposite field.     

Influence of oxidation time on semiconductive behaviour of thermally grown oxide films on AISI 304L

The oxide films formed on AISI 304L stainless steel at 300 °C in the oxidation time range between 2 and 4 h have been studied by photoelectrochemistry. Photocurrents were investigated as a function of the wavelength of the incident light and the electrode potential. The investigation allowed the determination of the semiconductive properties of the oxides. The oxide films showed n-type behaviour. A duplex structure of the oxide films has been suggested on the basis of the photocurrent spectra, with an internal oxide layer having an optical gap (E_g2 = 2.16-2.3 eV) depending on the applied potential and oxidation time, higher to that of the external oxide layer (E_g1 ≈ 1.9 eV). Significant variations in the amplitude of the photocurrent were detected as a function of the applied potential and the oxidation time.