Synthesis of BEDT-TTF derivatives with carboxylic ester and amide functionalities

Synthetic routes to BEDT-TTF derivatives bearing side chain carboxylic ester and amide groups are reported. Methyl ET-ethanoate was prepared in five steps from vinylacetic acid; amide groups were installed early in the synthesis by mixed anhydride methods before the final coupling reaction.     

Analysis of metabolites of glucose pathways in human erythrocytes by analytical isotachophoresis

A method for the quantitative determination of the major anionic constituents of fountain solutions, typically mono-, di- and hydroxycarboxylates, alkylbenzenesulfonates, and inorganic anions, including orthophosphate and polyphosphates, is presented here for the first time. The analytical problems arising from extensive co-elution of many of these analytes on an ion-exchange column have been resolved through a combination of (i) careful selection of the concentration gradient of the sodium hydroxide eluent; (ii) parallel analysis by ion-exclusion chromatography; and (iii) determination of total phosphorus by inductively coupled plasma atomic emission spectrometry.     

Comparison of pulsed amperometric detection and integrated voltammetric detection for inorganic sulfur compounds in liquid chromatography

A Variety of potential–time waveforms are useful in pulsed electrochemical detection (PED) when applied for the amperometric detection of numerous polar organic compounds following their separation by liquid chromatography (LC). Here, we compare the waveforms for pulsed amperometric detection (PAD) and integrated voltammetric detection (IVD) applied for detection of organosulfur compounds at Au electrodes in acidic media. In PAD waveforms, electrodes response is measured at a constant detection potentials. In IVD waveforms, electrodes current is integrated throughout a fast cyclic scan of the detection potential. As a consequence of this difference in detection strategy, the background signal for IVD is significantly smaller for PAD in the detection of organosulfur compounds whose response mechanisms require the concomitant formation of surface oxides on Au electrodes. Furthermore, in comparison to Pad, IVD has a larger sensitivity and a diminished system peak from 0₂ dissolved in the sample. Use of a preadsorption step increases detection sensitivity in both PAD and IVD. The limit of detection (S/N=3)for cysteine in LC-IVD is ca. 6 nM for a 50-μl injection (i.e., 300 fmol) using a detection waveform that includes a 1000-ms preadsorption period.     

Structures and energetics of C3H6S isomers: a Gaussian-3 ab initio study

Twenty-two isomers/conformers of C₃H₆S^+√ radical cations have been identified and their heats of formation (ΔH_f) at 0 and 298 K have been calculated using the Gaussian-3 (G3) method. Seven of these isomers are known and their ΔH_f data are available in the literature for comparison. The least energy isomer is found to be the thioacetone radical cation (4⁺) with C_2v symmetry. In contrast, the least energy C₃H₆O^+√ isomer is the 1-propen-2-ol radical cation. The G3 ΔH_f298 of 4⁺ is calculated to be 859.4 kJ mol⁻¹, ca. 38 kJ mol⁻¹ higher than the literature value, ≤821 kJ mol⁻¹. For allyl mercaptan radical cation (7⁺), the G3 ΔH_f298 is calculated to be 927.8 kJ mol⁻¹, also not in good agreement with the experimental estimate, 956 kJ mol⁻¹. Upon examining the experimental data and carrying out further calculations, it is shown that the G3 ΔH_f298 values for 4⁺ and 7⁺ should be more reliable than the compiled values. For the five remaining cations with available experimental thermal data, the agreement between the experimental and G3 results ranges from fair to excellent.

Cation CH₃CHSCH₂^+√ (10⁺) has the least energy among the eleven distonic radical cations identified. Their ΔH_f298 values range from 918 to 1151 kJ mol⁻¹. Nevertheless, only one of them, CH₂=SCH₂CH₂^+√ (12⁺), has been observed. Its G3 ΔH_f298 value is 980.9 kJ mol⁻¹, in fair agreement with the experimental result, 990 kJ mol⁻¹.

A couple of reactions involving C₃H₆S^+√ isomers CH₂=SCH₂CH₂^+√ (12⁺) and trimethylene sulfide radical cation (13⁺) have also been studied with the G3 method and the results are consistent with experimental findings.     

Fe2O3-catalyzed Pummerer rearrangement of acyl chlorides and sulfoxides: Facile synthesis of alkylthiomethyl ester

A simple, effective approach for the Pummerer rearrangement of acyl chlorides with sulfoxides by using a low-cost and more abundant Fe catalyst has been described. The alkylthiomethyl ester products were prepared in good to excellent yields for a range of different substrates including asymmetrical sulfoxides and acyl chlorides with a variety of functional groups under mild reaction conditions. The reaction features short reaction time, simple manipulation, cheap reagents and a broad substrate scope. Single crystal X-ray analysis of a representative methylthiomethyl (MTM) group containing product was also reported.     

Catalytic Carbonylation and Carboxylation of Organosulfur Compounds via C−S Cleavage

Transition‐metal‐catalyzed carbonylation with CO gas occupies a privileged position in organic synthesis for the synthesis of carbonyl compounds. Although this attractive and useful chemistry has led many researchers to investigate carbonylative transformations of various organic (pseudo)halides, C?S‐cleaving carbonylation of organosulfur compounds has been fairly limited. Recently, a broad spectrum of C?S‐cleaving transformations has been emerging in the field of cross‐coupling. In light of the importance of carbonyl compounds as well as considerable advancement for employing organosulfur compounds as competent surrogates of (pseudo)halides, carbonylative transformations of C?S bonds should be of high value. This Minireview focuses on catalytic C?S carbonylation of organosulfur compounds with CO or its equivalents. In addition, reductive carboxylation of C?S bonds with CO₂ is described.     

Synthesis of 5‐(Arylselanyl)‐2‐(arylsulfanyl)benzoates by [3+3] Cyclocondensation of 3‐(Arylsulfanyl)‐1‐(silyloxy)buta‐1,3‐dienes with 2‐(Arylselanyl)‐3‐(silyloxy)alk‐2‐en‐1‐ones

Functionalized 5‐(arylselanyl)‐2‐(arylsulfanyl)benzoates were prepared by [3+3] cyclocondensation of 3‐(arylsulfanyl)‐1‐(silyloxy)buta‐1,3‐dienes with 2‐(arylselanyl)‐3‐(silyloxy)‐alk‐2‐en‐1‐ones.     

二次锂电池聚合物正极材料研究进展

近几十年,二次锂电池作为重要的储能装置得到迅猛发展,而开发高性能的锂电池电极材料一直是电化学能源领域的研究热点之一。与传统无机正极材料相比,聚合物正极材料具有比容量高、柔软性好、廉价易得、环境友好、加工方便、可设计性强等诸多优点。本文综述了导电聚合物、共轭羰基聚合物以及含硫聚合物正极材料的结构特点、电极反应机理、电化学性能和近五年来的重大研究进展,总结了这三类聚合物电极材料的优缺点,并重点介绍了含硫聚合物电极材料中存在的问题及改进手段,最后提出了综合这三类聚合物优点的含硫共轭导电聚合物将会是该领域的研究方向。     

Separation of perfluoroalkylsulfinic acids and perfluoroalkylsulfonic acids by ion-exclusion chromatography

Ion-exclusion chromatography has been successfully applied to the separation of a number of perfluoroalkylsulfinic acids and perfluoroalkylsulfonic acids. The separation of various perfluoroalkylsulfinic and perfluoroalkylsulfonic acids, with different alkyl groups, was investigated on a polymethacrylate-based, weakly acidic, cation-exchange resin (TSK gel OApak-A) in the H⁺-form and using conductimetric detection. When water was used as the eluent, these perfluoroalkylsulfinic and perfluoroalkylsulfonic acids could not be resolved. When an aqueous solution of benzoic acid and o-phthalic acid was used, the separation of each of these acids occurred. In order to improve their separation, the effect of the addition of methanol and 2,2,2-trifluoroethanol, as organic modifiers, was also investigated.     

Selective β-oxidation of α-sulfanyl amides

A selective β-oxidation of a series of α-sulfanyl amides to the corresponding β-oxo-α-sulfanyl amides is described. This selective efficient oxidation of an unfunctionalised methyl or methylene group occurs under mild conditions, involving three sequential transformations conducted without isolation of the intermediates. Critically neither the sulfur nor the reactive α-CH bond is affected in the overall process.