Influence of transition metal ions on the textural properties of alumina and aluminasilicates

Accelerated phase transformations and chemical reactions of metastable aluminas and kaolinite, doped with Cu^{2 +}, Mn^{3 +}/Mn^{2 +} and Fe^{3 +}/Fe^{2 +} ions, are accompanied with accelerated decrease of surface area and pore volume values. The phenomena in metal ion doped samples are explained by a catalytic mechanism, in terms of the Jahn-Teller effect. This revised version was published online in June 2006 with corrections to the Cover Date.     

高岭石无定形化的动力学研究

Amorphous kaolinite derivatives were prepared through mixing kaolinite with HCOOK and KOH solution. Ki-netics of kaolinite being turned into amorphous derivatvies was investigated by XRD. It showed that the transfor-mation included dynamic and diffuse controlling stages. And the active energy E₁=26.8kJ·mol^-1; E₂=12.2 kJ·mol^-1. TEM and SEM images showed that particle size of the amorphous derivatives was about 50nm. And the amorphous derivatives seemed like alumnsilicate gel， accompanied by some aggregates.     

Benzamide species retained by DMSO composites at a kaolinite surface

The surface area of kaolinite-benzamide (K-Bz)6.62 m² g^–1, whichis noticeably lower than that of kaolinite-dimethyl sulphoxide (K-DMSO) 14.61m² g^–1, the co-perturbationof the inner-surface hydroxyl features at 3697 and 3650 cm^–1,and the increase of d(001) value by 7.44 Å are all related to the benzamidespecies inserted into the kaolinite structure through the replacement of theK-DMSO composites. Disappearance of the DMSO reflections and emergence ofwell-defined features at 6.04(2θ) and 11.16(2θ), 001 and 002 reflectionswith d values of 14.62 and 7.92 Å, respectively point out that the DMSOspecies were substituted efficiently by benzamide molecules. The thermal stabilityof the K-Bz derivative up to 300°C can be attributed to the slightly tiltedaromatic ring keying into the gibbsitic sheets via the –NH₂groups.     

STUDY ON BIODEGRADABILITY OF POLY (3-HYDROXYBUTYRATE-co-3-HYDROXYVALERATE)/ORGANOPHILIC MONTMORILLONITE NANOCOMPOSITES

1. INTRODUCTION Poly (3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) has been recognized as apotential environment-friendly substitute for traditional plastics. The structure, mechanicalproperties and biodegradability of PHBV as biodegradable plastic have been reported by many groups [1-3]. However, PHBV presents some problems, such as high cost, slow crystallization rate, relatively difficult processing and high degree of crystallinity. Therefore, it is difficult to use PHBV widel…     

Incorporation of lipid domains in Cerasome, a morphologically-stable organic-inorganic vesicular nanohybrid

To extend the concept of the Cerasome, an organic-inorganic vesicular nanohybrid, this paper investigates the preparation and characterization of a “mixed” Cerasome. The system consists of a Cerasome-forming lipid 1, a cationic synthetic lipid 2, and a zwitterionic phospholipid 3. Lipid mixtures of 1 and 2 or 1 and 3 were used to prepare the mixed Cerasomes. Their lipid distributions were examined using differential scanning calorimetry (DSC), which showed that 1 and 2 (or 1 and 3) were phase-separated in the mixed Cerasomes. These results seem to be mainly attributable to the polymerizable nature of 1. Results of scanning electron microscopy (SEM) and energy-dispersive X-ray analysis (EDX) showed that 1 and 3 were both incorporated into a single Cerasome, not macroscopically separated to form separate vesicles from each lipid component. Mixed Cerasomes of 1 and 2 showed high morphological stability against a membrane-solubilizing surfactant, incorporating up to 70% of 2. On the other hand, the mixed Cerasomes from 1 and 3 were less stable than the mixed Cerasomes from 1 and 2. This relative instability might be attributable to differences between the mixed Cerasomes from 1 and 2 and 1 and 3 in terms of their vesicular sizes, lipid domain sizes, and their relative effectiveness for siloxane network formation. These results strongly support the formation of mixed Cerasomes that have lipid domains in-plane. Systems described in this study are useful to prepare variously mixed Cerasomes that have different surface functionalities and in-plane lipid distribution, but which have high morphological stability.     

Synthesis and characterization of silver nanoparticle/kaolinite composites

Ag nanoparticles were synthetized in the interlamellar space of a layered kaolinite clay mineral. Disaggregation of the lamellae of non-swelling kaolinite was achieved by intercalation of dimethyl sulfoxide. The kaolinite was suspended in aqueous AgNO₃ solution and, after adsorption of Ag⁺, the ions were reduced with NaBH₄. The interlamellar space limits particle growth (d_ave=3.8–4.2 nm); however, larger silver particles may be formed on the exterior surface of kaolinite with d_ave=5.6–10.5 nm diameter. The diameter of the particles prepared in this way is depending on the initial AgNO₃ concentration. The silver nanoparticles prepared were characterized by UV–vis spectroscopy, X-ray diffraction (XRD), Small angle X-ray scattering (SAXS), X-ray photoelectron spectroscopy (XPS) and Transmission electron microscopy (TEM).     

Thermal properties stability of UV irradiated PVA nanohybrid composites

Zn‐Al‐salicylic nanohybrid layers have been prepared and used as fillers for polyvinyl alcohol (PVA). Nanohybrid layers of a broad absorption area in UV region were completely and uniformly dispersed in a continuous polymer matrix. PVA and PVA nanohybrid composite (NHC) films were exposed to UV irradiation. Thermal properties (diffusivity, effusivity, and conductivity) of both have been measured through photoacoustic technique before and after UV irradiation. Thermal parameters of PVA suffered from a quick deterioration with UV exposure due to reduction of the phonon mean free path as a result of molecular chain scissions. However, significant stability in such parameters of NHC has been obtained under the influence of UV irradiation. This thermal properties stability may be an important step on the way of obtaining photostable polymer NHC. Copyright © 2012 John Wiley & Sons, Ltd.     

Micro-composites based on polylactic acid with kaolinite or rice husk particles and their performance on water vapor permeability

In this work, the effect of addition of kaolinite and rice husk microparticles on the water vapor permeability of polylactic acid (PLA) was evaluated. The PLA-composites materials were characterized by X-ray diffraction, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA) and optical microscopy. For the composite preparation, an experimental design was established using two factors: additive type and concentration. When evaluating the water vapor permeability of the composites, it was found that the incorporation of kaolinite at 1% and 5% reduced the permeability coefficient of PLA. Furthermore, the inclusion of 5% kaolinite showed an increase on the tensile strength of the material. By contrast, the addition of rice husk produced an increase on water vapor permeability of the material and a decrease of both the tensile strength and ductility (percent of elongation at fracture). The higher dispersion and more regular morphology of the kaolinite particles could explain the enhancement of the gas barrier. A similar thermal behavior was observed for both PLA and composite materials, confirming that no damage of these properties was caused with the incorporation of the filler particles.     

High pressure treatment of pharmaceutical drug delivery and related systems

Abstract

Solids like layer silicates (kaolinite and montmorillonite) as well as ZnO are in use in pharmacy. They are pressure treated and subsequently analyzed by means of ESR spectroscopy. The structural changes indicated by Fe³⁺ ions and paramagnetic defects are reponsible for the enhanced chemical activity of the pressurized systems.

Especially active Fe-O-species are formed which can react with intercacalated organic molecules. The most probable first step of such reactions will be a solid state single electron transfer. Spin probes and spin traps were used to prove this statements. The activation of the drug delivery systems by mechanical treatments is of importance for the stability of the drugs incorporated.     

Copper(I) complex covalently anchored on graphene oxide as an efficient and recyclable catalyst for Sonogashira reaction

In this study, the organosilane‐functionalized graphene oxide as a stabilizer was prepared by a facile one‐step silylation approach. [Cu(PPh₃)₃Cl] complex was successfully immobilized onto the graphene oxide surface through coordination interaction with organosilane ligand spacers. The supported catalyst showed enhanced catalytic performance toward Sonogashira reaction of aryl halides with phenylacetylene in water solvent compared with the homogeneous analogues, and it could be readily recycled and reused several times without discernible loss of its activity.