Imaging fiber microarray fluorescent ion sensors based on bulk optode microspheres

Optical imaging fibers with micrometer-sized wells were used as a sensing platform for the development of microarray optical ion sensors based on selective bulk extraction principles established earlier for optodes. Uniform 10 μm sized microspheres based on plasticized poly(vinyl chloride) containing various combinations of ionophores, fluoroionophores and lipophilic ion-exchangers were prepared for the detection of sodium, potassium, calcium and chloride, and deposited onto the wells of etched fiber bundles. Specifically, sodium sensing particles were based on tert-butylcalix[4]arene tetraacetic acid tetraethylester, potassium particles on 2-dodecyl-2-methyl-1,3-propanediyl bis[N-[5′-nitro(benzo-15-crown-5)-4′-yl]carbamate] (BME-44), calcium particles on an acrylic derivative of ETH 129 (AU-1) covalently attached to a methacrylic polymer, and chloride particles based on the anticrown ionophore [9]mercuracarborand-3 (MC-3). The fluorescence emission characteristics of individual microspheres were observed from the backside of the fibers and were found to selectively and rapidly change as a function of the sample composition. The optical characteristics of the particles were found to be comparable to that of corresponding thin optode films and particles deposited onto microscope glass slides. The measuring ranges (logarithmic molar concentrations) at pH 7.0 were found as −3 to 0 for sodium, −3.5 to −0.5 for potassium, −7 to −2 for calcium, and −5 to 0.5 for chloride. Selectivities were determined over other common electrolytes and found to be sufficient for physiological applications. The simultaneous deposition of sodium and chloride sensing particles was successfully performed, demonstrating that such microarray sensors are capable of simultaneously sensing multiple analytes. This technology is compatible with other microsphere-based fluorescent sensing principles, forming a promising total analysis platform for a variety of applications.     

Development of a new fluorimetric bulk optode membrane based on 2,5-thiophenylbis(5-tert-butyl-1,3-benzexazole) for nickel(II) ions

A highly sensitive and selective fluorimetric optode membrane for the determination of ultra trace amounts of Ni²⁺ ions was prepared. The plasticized PVC-membrane incorporating potassium tetrakis(p-chlorophenyl)borate (KTpClPB) and 2,5-thiophenylbis(5-tert-butyl-1,3-benzexazole) (TTBB), as a highly fluorescent chromoionophore, displays a calibration response for Ni²⁺ ions over a wide concentration range of 1.0×10⁻³ to 1.0×10⁻⁸ M. It has a relatively fast response of <40 s. In addition to high stability and reproducibility, and relatively long working lifetime, the sensor possesses good selectivity for nickel ions over several common diverse ions. The fluorescence signal of the optode membrane can be easily recovered by immersion in EDTA solution. The optode was applied successfully to the determination of traces of Ni²⁺ ion in edible oil and a wastewater sample from nickel electroplating industries.     

基于环糊精/卟啉包络物荧光猝灭的二氧化碳光学敏感膜的研究

全 -( 2 ,6-二 -O-异丁基 ) -β-环糊精 ( DOB-β-CD)对固定于增塑 PVC膜中的 meso-四 ( 4-甲氧基苯基 )卟啉( TMOPP)有明显的荧光增强效应 ,且该荧光可被溶液中的二氧化碳可逆猝灭 .本文据此研制了一种可用于测定水溶液中二氧化碳含量 ,即 [H2 CO3]浓度的荧光敏感膜 .研究了最佳膜的组成 .经过组成优化的敏感膜测定 [H2 CO3]浓度的范围为 4 .75× 1 0 - 7～ 3.9× 1 0 - 5 mol/L.该传感器响应迅速、重现性好 ,常见的离子无明显干扰 .     

A sodium ion selective optode based on fluorescein octadecyl ether octadecyl ester and application in beverage and urine assay

A fast responsive sodium ion selective fluorescent optode membrane mounted on an optical fiber has been developed. The sensing membrane contained fluorescein octadecyl ether octadecyl ester (FODEE), potassium tetrakis(4-chlorophenyl) borate (KTpClPB) and a calix[4]arene tetraester in a plasticized poly(vinyl chloride) (PVC) matrix. It exhibited a reversible response to Na⁺ in 0.5 mol/l of HCl in the concentration range of 1.0×10⁻⁶ to 0.1 mol/l. The selectivity, response time, reproducibility and lifetime of the optode membrane were discussed. The practical use of this sensor was demonstrated by real sample analysis in complex sample solutions such as beverage and urine samples.     

Dynamic method as a simple approach for wide range pH measurements using optodes

In this paper, a flow system equipped with an optode has been suggested for wide range pH measurements. Triacetyl cellulose was used as the optode membrane in which different pH indicators were immobilized. For extending the pH range, the dynamic response rather than the steady-state response of the optode was measured. Since diffusion is the main process governing the system response, different parameters having influence on diffusion of the analyte into the membrane were optimized. Under the optimum conditions, wide range pH determination (up to 11 pH units) is simply achieved regardless of the pK_a of the pH indicator immobilized in the membrane. To validate the application of the method different indicators with different structures and pK_a values were tested and the results were all confirming the precision and accuracy of the method. The suggested method also has combined advantages of flow systems together with inherent advantages of kinetic systems.     

An imaging pH optode for cell studies based on covalent attachment of 8-hydroxypyrene-1,3,6-trisulfonate to amino cellulose acetate films

The objective of this study was to create a thin film optode for fast pH measurements that meets the requirements for imaging pH-responses from cells as well as for a future hybrid design for detection of multiple analytes simultaneously. The sensor is based on the covalent attachment of 8-hydroxypyrene-1,3,6-trisulfonate (HPTS) to a film forming cellulose acetate material through a sulfonamide linkage. The synthesis routes of the cellulose material and regio-specific covalent attachment of the dye are described in detail. The sensor was sterilized in two different ways and showed excellent biocompatibility with Chinese hamster ovary cells. Imprints from cells and μm thin cell extensions were visualized when altering pH of the surrounding solution. The sensor was tested together with time-dependent sigmoidal calibrations giving pH determinations with an exceptional precision and accuracy during measurement within pH 6-8. The precision of the optode, calculated as pooled S.D. (n = 8) according to IUPAC recommendations between pH 6.641 and 7.742 was 0.0029. The accuracy was significantly better than the electrode used as reference during the measurements. The response time (0-95%) was 100 s between pH 6.641 and 7.742 and the reverse response (95-0%) was 80 s. The sensor shows great potential for extra-cellular pH determination over time during cell growth and pharmacological exposure.     

Design and evaluation of a thorium (IV) selective optode

A novel optical sensor has been proposed for sensitive determination of thorium (IV) ion in aqueous solutions. The thorium sensing membrane was prepared by incorporating 4-(p-nitrophenyl azo)-pyrocatechol (NAP) as ionophore in the plasticized PVC membrane containing tributyl phosphate (TBP) as plasticizer. The membrane responds to thorium ion by changing color reversibly from yellow to red-brown in glycine buffer solution at pH 3.5. The proposed sensor displays a linear range of 8.66 × 10⁻⁶-2.00 × 10⁻⁴ M with a limit of detection of 6 × 10⁻⁶ M. The response time of the optode was about 8.8-12.5 min, depending on the concentration of Th (IV) ions. The selectivity of optode to Th (IV) ions in glycine buffer is good. The sensor can readily be regenerated by exposure to a solution mixture of sodium fluoride and 5-sulfosalicylic acid (dihydrate) (0.01 M each). The optode is fully reversible. The proposed optode was applied to the determination of thorium (IV) in environmental water samples.     

Nicotine derivative optode membrane with nonactin as ionophore

Plasticised poly(vinyl chloride) optode membrane incorporated with nonactin as ionophore, ETH 5294 as H⁺-selective chromoionophore and potassium tetrakis(4-chlorophenyl)borate as anionic site, was used as a reversible sensing device for indirect determination of nicotine. Nicotine was extracted from cigarette samples and converted to its bromoethane derivative (ND⁺Br⁻) by reacting with a solution of bromoethane in ethanol. ND⁺Br⁻, in a solution of Tris (hydroxymethyl)aminomethane–HCl buffer, was extracted into the bulk of the optode membrane and subsequently caused changes in optical absorption of the sensing layer. The pH effect, response mechanisms, response behaviour, response time, dynamic working range, detection limit, sensitivity and selectivity were discussed in detail.