光学偶极阱中铷原子5S_(1/2)及5P_(3/2)态的AC Stark频移

基于二能级模型和多能级模型,分析计算了由强聚焦高斯光束形成的光学偶极阱中87Rb原子5S1/2态和5P3/2态的AC Stark频移。基于多能级模型,针对在852 nm高斯激光束强聚焦所形成的87Rb原子远失谐光学偶极阱中进行偏振梯度冷却的情形,计算了冷却循环跃迁(5S1/2F=2-5P3/2F′=3)的频移量,结果显示频移对molasses冷却过程产生了重要的影响。同时,计算了5S1/2|F=2,mF=±2〉态和5P3/2|F′=3,mF=±3〉态的AC Stark频移随光学偶极阱激光波长的变化情况,发现在红失谐情况下,对于87Rb原子5S1/2-5P3/2态跃迁不存在魔数波长。     

Non-equilibrium self-assembled structures in thick PS-b-PMMA copolymer films

Phenomena associated with the order-disorder transition (ODT) of block copolymers have been studied by optical light microscopy, SAXS, SEM, TEM and DSC. Observations have been made on almost symmetric polystyrene-block-poly(methyl methacrylate) samples of three molecular weights and their mixture. We observed non-equilibrium supermolecular structures several microns in diameter in the bulk of thick PS-b-PMMA films (ca. 100 μm thickness) prepared by vacuum drying of films cast from a non-selective solvent (after a short-term annealing above the T_g). Apparent LDOT (lower disorder-to-order transition) behaviour is observed for samples with non-equilibrium morphology surviving from solution as deduced from SAXS 1/I_m vs 1/T and the full width at half-maximum vs 1/T plots.The measurements point to complex behaviour near the ODT, but homogenization of samples upon long-term annealing well above the T_g temperature call into existence common stacks of lamellae observable in SEM images of microphase-separated samples. This verifies the opinion that the observed apparent LDOT behaviour of samples II, III and II + III is associated with the frozen non-equilibrium morphology surviving from solution. This is confirmed by SAXS measurement on a homogenized sample displaying the expected UDOT behaviour. It has been demonstrated that self-assembled structures prepared by vacuum drying of films cast from a non-selective solvent are non-equilibrium structures and their successive ordering is difficult due to a relative narrow temperature interval between T_g and degradation temperature. The conditions under which BCP films are prepared thus have a pronounced effect on the microstructure and microphase ordering process.     

Application of octadecanethiol self-assembled monolayer to cholesterol biosensor based on surface plasmon resonance technique

Octadecanethiol (ODT) self-assembled monolayer (SAM) prepared onto gold-coated glass plate has been modified by using nitrene reaction of 1-fluoro-2-nitro-4-azidobenzene (FNAB) that further covalently binds to cholesterol oxidase (ChOx) via thermal reaction. FNAB acts as a bridge (cross-linker) between SAM and ChOx. The ChOx/FNAB/ODT/Au electrode thus fabricated has been characterized using contact angle (CA) measurements, UV-vis spectroscopy, electrochemical techniques and X-ray photoelectron spectroscopy (XPS) technique, respectively. This ChOx/FNAB/ODT/Au bioelectrode has been utilized for estimation of cholesterol in solution using surface plasmon resonance (SPR) technique. This SPR based cholesterol biosensor has linearity from 50 to 500 mg/dl of cholesterol in solution with lower detection limit of 50 mg/dl and shelf life of about 2 months when stored at 4 °C.     

Investigation of limitations of optical diffraction tomography

Optical diffraction tomography (ODT) applied to measurement of optical microelements is limited by low dynamic range, i.e., only objects with small deviations of refractive-index distribution can be measured. Therefore in this paper the limitations and errors of ODT are investigated throughout extensive numerical experiments. It is shown that these errors can be reduced by introduction of additional numerical focusing in the tomographic reconstruction algorithm. Additionally, new tomographic reconstruction algorithm using back propagation in reference medium for optical microelements measurement with known design is proposed. This hybrid reconstruction algorithm allows significant extension of ODT applicability in measurement of elements having large deviations of refractive-index distribution.     

WDM网中同频串扰的研究

串扰是波分复用(WDM)光网络中限制光交叉连接(OXC)节点容量的一个重要因素.本文分析了相干和非相干串扰对通过OXC节点的光信号的影响,给出了固定和最佳判决门限两种情况下的光功率恶化,并进行了仿真计算.结果表明相干串扰对系统的影响很大.与固定判决相比,采用最佳判决可以降低串扰影响.串扰引起的光功率恶化主要取决于复用波数M,而与输入光纤数N关系不大.为了减小串扰对网络的限制,可以在OXC节点内使用滤波器.     

Rheology and morphology change with temperature of SEBS/hydrocarbon oil blends

The effect of hydrocarbon oil incorporation on the rheological and phase behaviors of poly(styrene‐b‐(ethylene‐co‐butylene)‐b‐styrene) (SEBS) has been investigated. SEBS‐A1 (neat SEBS) shows a presence of very long relaxation time mode even at the highest temperature carried out here. On the other hand, G′ of SEBS‐A3 (oil concentration = 50 wt %) drastically decreases with increase of temperature at a critical temperature, which can be assigned to be order–disorder transition (ODT). The critical temperature was determined by two rheological criteria. Incorporation of hydrocarbon oil affects the ODT temperature. The rheological response is very sensitive to a few temperature increases around the ODT temperature. Above the critical temperature, G′ finally yields the terminal flow in the low frequency range. The morphological observation at various temperatures was determined using atomic force microscopy (AFM) equipped with environmental controller. This enabled in situ observation of structural change of SEBS induced by temperature and phase transition. We found that the layered texture, mostly aligned along the surface can be seen for SEBS‐A1 ranging from room temperature to 230 °C, though the image contrast reduced by an increase of temperature. SEBS‐A3 showed sphere domains at room temperature and also remains the structure at a critical temperature. The phase separated structure disappeared almost completely above ODT temperature, which was confirmed by the rheologial criteria. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 955–965, 2009     

Surfactant-free coating of thiols on gold nanoparticles using sonochemistry: A study of competing processes

A method for the surfactant-free coating of gold nanoparticles with thiols using sonochemistry is presented. The gold nanoparticles were prepared by a modified Zsigmondy method, affording good control over the particle-size distribution, and the thiol coating was performed by the sonication of a biphasic system consisting of a nanoparticle suspension in water and thiols in toluene. The effects of two important reaction parameters on the particle morphology, viz. sonication time and thiol concentration, were investigated in detail using transmission electron microscopy. The effect of the thiol chain length was also studied. We show that the morphology of the coated particles is determined through a competition between two opposing effects: particle fusion, due to the sonication conditions, and digestive ripening, due to the action of the thiols. Additionally, we illustrate the utility of our technique for various applications, including surface-enhanced Raman scattering from bound molecules, and further functionalization using a thiol-exchange reaction. Our technique paves the way for an efficient synthesis of thiol-coated AuNPs of different shapes and sizes, suitable for a range of diverse applications.     

Dynamics and order-disorder transitions in bidisperse diblock copolymer blends

We employ the dynamic extension of self-consistent field theory (DSCFT) to study dynamics and order-disorder transitions (ODT) in AB diblock copolymer binary mixtures of two different monodisperse chain lengths by imitating the dynamic storage modulus G′ corresponding to any given morphology in the oscillatory shear measurements. The different polydispersity index (PDI) is introduced by binary blending AB diblock copolymers with variations in chain lengths and chain number fractions. The simulation results show that the increase of polydispersity in the minority or symmetric block introduces a decrease in the segregation strength at the ODT, (χN)_ODT, whereas the increase of polydispersity in the majority block results in a decrease, then increase and final decrease again in (χN)_ODT. To the best of our knowledge, our DSCFT simulations, for the first time, predict an increase in (χN)_ODT with the PDI in the majority block, which produces the experimental results. The simulations by previous SCFT, which generally speaking, is capable of describing equilibrium morphologies, however, contradict the experimental data. The polydispersity acquired by properly tuning the chain lengths and number fractions of binary diblock copolymer blends should be a convenient and efficient way to control the microphase separation strength at the ODT.     

Investigating asymptotic suction boundary layers using a one-dimensional stochastic turbulence model

The turbulent asymptotic suction boundary layer is studied using a one-dimensional turbulence (ODT) model. ODT is a fully resolved, unsteady stochastic simulation technique. While flow properties reside on a one-dimensional domain, turbulent advection is represented using mapping events whose occurrences are governed by a random process. Due to its reduced spatial dimensionality, ODT achieves major cost reductions compared to three-dimensional (3D) simulations. A comparison to recent direct numerical simulation (DNS) data at moderate Reynolds number (Re = u_∞ / v₀ = 333, where u_∞ and v₀ are the free stream and suction velocity, respectively) suggests that the ODT model is capable of reproducing several velocity statistics, i.e. mean velocity and turbulent kinetic energy budgets, while peak turbulent stresses are under-estimated by ODT. Variation of the Reynolds number in the range Re ∈ [333,400,500,1000] shows that ODT can reproduce various trends observed as a result of increased suction in turbulent asymptotic suction boundary layers, i.e. the reduction of Reynolds stresses and enhanced skin friction. While up to Re = 500 our results can be directly compared to recent LES data, the simulation at Re = 1000 is currently not feasible through full 3D simulations, hence ODT may assist the design of future DNS or LES simulations at larger Reynolds numbers.     

Dynamic mechanical relaxation behavior of block copolymers at high temperatures

We carried out dynamic mechanical measurements to investigate three different examples of block copolymers: styrene–isoprene diblock copolymers and styrene–butadiene–styrene and styrene–(styrene butadiene)–styrene triblock copolymers. Isochronal and isothermal measurements of the real and imaginary parts of the complex shear modulus were performed over wide ranges of temperature and frequency. The measurements showed the presence of an additional relaxation process appearing at temperatures higher than those of the glass relaxation of the polystyrene phase, which has been misinterpreted by some authors as an order–disorder transition. The frequency dependence revealed that this process was a relaxation process and did not belong to a first‐order transition. Moreover, the influence of crosslinking via dicumylperoxide was measured, and we constructed complete master curves to confirm the presence of two relaxation processes. The high‐temperature relaxation process was strongly suppressed by crosslinking. Therefore, it was possible to detect the glass relaxation process of the polystyrene phase in a precise manner. The results were compared with those of homopolymers. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2198–2206, 2001