Phase transition of polycarbonate in blends with liquid crystal

Phase transition temperatures of polycarbonate film consisting of micron-sized liquid crystalline droplets were investigated using differential scanning calorimetry (DSC) and thermo-optical analysis (TOA) methods. Both a decrease in (T _g ) and (T _m ) of the polycarbonate with an increase of liquid crystal (LC) content in the sample were observed. The decrease ofT _g is related to the plastifying effect of a low molecular weight LC substance remaining soluble in the polycarbonate matrix. A fraction of the liquid crystal contained in the droplets was estimated on the basis of theT _g decrease.     

化学衍生辅助液相色谱-串联质谱测定枇杷膏中的齐墩果酸和熊果酸

建立了一种液相色谱-串联质谱(LC-MS/MS)同时测定齐墩果酸和熊果酸含量的分析方法,利用衍生化试剂N,N-二甲基乙二胺(DMED)和d4-N,N-二甲基乙二胺(d4-DMED)分别衍生样品和标准工作溶液中的目标分析物,并将标准工作液的衍生产物作为稳定同位素内标。该方法线性关系良好,相关系数均0.99;齐墩果酸和熊果酸的检出限(S/N=3)分别为0.92 ng/L和1.06 ng/L,加标回收率分别为98.7%~102.7%和97.2%~105.0%。该方法简单、快速、准确,可满足枇杷膏中齐墩果酸和熊果酸高灵敏度检测的需求。     

Oxidative addition of different electrophiles with rhodium(I) carbonyl complexes of unsymmetrical phosphine–phosphine monoselenide ligands

Dimeric chlorobridge complex [Rh(CO)₂Cl]₂ reacts with two equivalents of a series of unsymmetrical phosphine–phosphine monoselenide ligands, Ph₂P(CH₂)_nP(Se)Ph₂ {n = 1( a ), 2( b ), 3( c ), 4( d )}to form chelate complex [Rh(CO)Cl(P∩Se)] ( 1a ) {P∩Se = η²‐(P,Se) coordinated} and non‐chelate complexes [Rh(CO)₂Cl(P～Se)] ( 1b–d ) {P～Se = η¹‐(P) coordinated}. The complexes 1 undergo oxidative addition reactions with different electrophiles such as CH₃I, C₂H₅I, C₆H₅CH₂Cl and I₂ to produce Rh(III) complexes of the type [Rh(COR)ClX(P∩Se)] {where R = ? C₂H₅ ( 2a ), X = I; R = ? CH₂C₆H₅ ( 3a ), X = Cl}, [Rh(CO)ClI₂(P∩Se)] ( 4a ), [Rh(CO)(COCH₃)ClI(P～Se)] ( 5b–d ), [Rh(CO)(COH₅)ClI‐(P～Se)] ( 6b–d ), [Rh(CO)(COCH₂C₆H₅)Cl₂(P～Se)] ( 7b–d ) and [Rh(CO)ClI₂(P～Se)] ( 8b–d ). The kinetic study of the oxidative addition (OA) reactions of the complexes 1 with CH₃I and C₂H₅I reveals a single stage kinetics. The rate of OA of the complexes varies with the length of the ligand backbone and follows the order 1a > 1b > 1c > 1d . The CH₃I reacts with the different complexes at a rate 10–100 times faster than the C₂H₅I. The catalytic activity of complexes 1b–d for carbonylation of methanol is evaluated and a higher turnover number (TON) is obtained compared with that of the well‐known commercial species [Rh(CO)₂I₂]^?. Copyright © 2006 John Wiley & Sons, Ltd.     

Enzyme sensor for the electrochemical detection of the marine toxin okadaic acid

An enzyme sensor for the electrochemical detection of the marine toxin okadaic acid (OA) has been developed. The strategy was based on the inhibition of immobilised protein phosphatase (PP2A) by this toxin and the electrochemical measurement of the enzyme activity by the use of appropriate enzyme substrates, electrochemically active after dephosphorylation by the enzyme. Colorimetric inhibition assays have demonstrated the PP2A from human red blood cells to be more sensitive and to provide a wider linear range than the one produced by genetic engineering. Catechyl monophosphate (CMP) and p-aminophenyl phosphate (p-APP) have been tested as enzyme substrates, the former providing higher electrochemical currents at convenient working potentials (+450 mV vs. Ag/AgCl). Biosensors with 19.1 and 5.0 U of immobilised enzyme have been applied to the OA detection. Whereas the 19.1-U biosensor has provided higher electrochemical currents and more reliable determinations, the 5.0-U one has attained a lower 50% inhibition coefficient (IC₅₀) value (22.19 in front of 154.84 μg L⁻¹) and a larger working range (2.69-171.87 in front of 42.97-171.87 μg L⁻¹). The analysis of toxicogenic dinoflagellate extracts with both biosensors and the comparison with the colorimetric assay and liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) have demonstrated the applicability of the developed electrochemical devices as screening biotools for the assessment of the toxicity of a sample.     

Analysis of questioned documents: A review

During the last years (2000–2014), many publications concerning the forensic analysis of questioned documents have been published, and new techniques and methodologies are nowadays employed to overcome forensic caseworks. This article reviews a comprehensive collection of the works focused on this issue, including dating studies, the analysis of inks from pens and printers, the analysis of paper, the analysis of other samples related to questioned documents and studies on intersecting lines. These sections highlight the most relevant analytical studies by a wide range of analytical techniques. Separation and spectrometric techniques are critically discussed and compared, emphasizing the advantages and disadvantages of each one. Finally, concluding remarks on the research published are included.     

Fabrication and characterizations of a polymer hybrid OA/MA/St-TiO2

A nano-hybrid composite of octadecyl acrylate/maleic anhydride/styrene (OA/MA/St) encapsulating nano-TiO₂ with an average particle size of 30-60 nm was fabricated based on chemical modification of nanotitania. The polymer hybrid OA/MA/St-TiO₂ and nano-TiO₂ were characterized by infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), static contact angle (CA) as well as transmission electron microscopy (TEM). FT-IR spectra and TGA results suggest that the copolymer OA/MA/St adheres on the surface of nano-TiO₂ through physical adsorption and chemical bonding. The calculated reacted OH surface density is about 0.6 OH/nm², and the modification efficiency is approximately 27.28%. In addition, when the molar ratio of OA/MA/St is 7:2:1, the hybrid shows the strongest hydrophobicity, and its static contact angle reaches as high as 146°. TEM image of the hybrid OA/MA/St-TiO₂ reveals that the modified particles have good dispersibility and compatibility with n-hexane.     

Investigation of the optical absorption dose response of LiF:Mg,Ti (TLD-100) and the role of V centers in F center (5.08 eV) bleaching

The optical absorption (OA) dose response of irradiated LiF:Mg,Ti has been measured over the dose range from 100 Gy to 1.4 M Gy. Measurements at high dose indicate that the 4.0 eV band is actually a composite band at 3.84 eV and 4.3 eV. Bleaching experiments at 5.08 eV (F band) support the participation of V₃ centers in the relaxation mechanisms following the bleach. The results are interpreted in the framework of a spatially correlated trapping center/luminescent center giving rise to composite peak 5 in the glow curve.     

Recent developments in manufacturing emulsions and particulate products using membranes

Membrane emulsification (ME) is a relatively new technique for the highly controlled production of particulates. This review focuses on the recent developments in this area, ranging from the production of simple oil-in-water (O/W) or water-in-oil (W/O) emulsions to multiple emulsions of different types, solid-in-oil-in-water (S/O/W) dispersions, coherent solids (silica particles, solid lipid microspheres, solder metal powder) and structured solids (solid lipid microcarriers, gel microbeads, polymeric microspheres, core-shell microcapsules and hollow polymeric microparticles). Other emerging technologies that extend the capabilities into different membrane materials and operation methods (such as rotating membranes, repeated membrane extrusion of coarsely pre-emulsified feeds) are introduced. The results of experimental work carried out by cited researchers in the field together with those of the current authors are presented in a tabular form in a rigorous and systematic manner. These demonstrate a wide range of products that can be manufactured using different membrane approaches. Opportunities for creation of new and novel entities are highlighted for low throughput applications (medical diagnostics, healthcare) and for large-scale productions (consumer and personal products).     

Effect of chelating agent on the oxidation rate of PCP in the magnetite/H2O2 system at neutral pH

The complex [Rh(CO)₂Cl]₂ reacts with two molar equivalent of pyridine carboxylic acids ligands Py-2-COOH(a), Py-3-COOH(b) and Py-4-COOH(c) to yield rhodium(I) dicarbonyl chelate complex [Rh(CO)₂(L^/)](1a) {L^/ = η²-(N,O) coordinated Py-2-COO⁻(a^/)} and non-chelate complexes [Rh(CO)₂ClL^//](1b,c) {L^// = η¹-(N) coordinated Py-3-COOH(b), Py-4-COOH(c)}. The complexes 1 undergo oxidative addition (OA) reactions with different electrophiles such as CH₃I, C₂H₅I, C₆H₅CH₂Cl and I₂ to give penta coordinated Rh(III) complexes of the types [Rh(CO)(CORⁿ)XL^/], {n = 1,2,3; R¹ = CH₃(2a); R² = C₂H₅(3a); X = I and R³ = CH₂C₆H₅ (4a); X = Cl}, [Rh(CO)I₂L^/](5a), [Rh(CO)(CORⁿ)ClXL^//] {R¹ = CH₃(6b,c); R² = C₂H₅(7b,c); X = I and R³ = CH₂C₆H₅ (8b,c); X = Cl} and [Rh(CO)ClI₂L^//](9b,c). The complexes have been characterized by elemental analysis, IR and ¹H NMR spectroscopy. Kinetic data for the reaction of 1a–b with CH₃I indicate a first order reaction. The catalytic activity of 1a–c for the carbonylation of methanol to acetic acid and its ester is evaluated and a higher turn over number (TON = 810–1094) is obtained compared with that of the well-known commercial species [Rh(CO)₂I₂]⁻ (TON = 653) at mild reaction conditions (temperature 130 ± 5 °C, pressure 35 ± 5 bar).