Chemical analysis of acidic silicon etch solutions: I. Titrimetric determination of HNO3, HF, and H2SiF6

The chemical etching of silicon using HF-HNO₃ mixtures is a widely used process in the processing of silicon wafers for microelectronic or photovoltaic applications. The control of the etch bath composition is the necessary condition for an effective bath utilization, for the replenishment of the consumed acids, and to maintain a certain etch rate. The present paper describes two methods for the total analysis of the individual etch bath constituents HF, HNO₃, and H₂SiF₆. Both methods start with an aqueous acid-base titration determining the total acid concentration and the concentration of H₂SiF₆. The first method is an acid-base titration using a 0.1 mol L⁻¹ methanolic solution of cyclohexylamine (CHA) as non-aqueous titrant to determine the content of nitric acid. Then, the amount of hydrofluoric acid is calculated from the difference between the total acid and nitric acid content. The second method is based on the determination of the total fluoride concentration using a fluoride ion-selective electrode (F-ISE). The content of hydrofluoric acid is obtained from the difference between the total fluoride content and the amount of fluoride bound as H₂SiF₆. The amount of nitric acid results finally calculated as difference to the total acid content.     

非水介质毛细管电泳电导检测舒血宁片中槲皮素含量

以甲醇：水＝70：30的体系为分离介质，柠檬酸－三（羟甲基）氨基甲烷（Citric acid-Tris)为支持电解质，使用电导检测，对槲皮素及其制剂舒血宁片进行了毛细管电泳分离检测，对电泳介质的种类、浓度、表观pH值以及操作电压和进样时间对分离的影响进行了研讨，并对分离检测机理进行了探讨。建立的测定槲皮素的方法的线性范围为：8．0－160．0mg/L；峰面积的RSD（n=6)为1．7％，检出限为1．0mg/L；样品加标回收率为92．8％－98．2％。     

Barium dichromate [BaCr2O7], a mild reagent for oxidation of alcohols to their corresponding carbonyls in non-aqueous polar aprotic media

Barium dichromate is used as a mild oxidizing agent for the selective conversion of primary and secondary alcohols to their corresponding aldehydes and ketones, respectively. Over-oxidation does not occur and primary alcohols undergo oxidation to the aldehyde. Primary and secondary benzylic alcohols are oxidized faster and more efficiently.     

Sample-stacking techniques in non-aqueous capillary electrophoresis

In sample-stacking techniques, the detection limit cannot be improved by simply increasing the length of the sample solution, because the individual electrophoretic parameters must be optimized. In an attempt to increase the amount of sample injected, as well as to focus them onto a small zone, two novel methods are proposed. One of these employs an "ultra-high conductivity zone", which was inserted between the sample zone and background solution to build an unequal conductivity gradient. The other employs a "low temperature bath". A portion of the capillary (near the junction between the sample solution and the background solution) was immersed in a low temperature bath, which served as a "pseudo-high-conductivity zone" due to the fact that conductivity would increases when the temperature is decreased. As a result, a large volume of sample injection can be achieved. Using 3,4-methylenedioxymethamphetamine as a model compound, the detection limit was determined to be 1.6 x 10(-6) M (S/N = 3) by means of normal non-aqueous capillary electrophoresis (NACE). This could be improved to 3.0 x 10(-8) M, 4.8 x 10(-9) M and 5.0 x 10(-9) M, respectively, when the normal stacking, ultra-high conductivity zone NACE-stacking and the low-temperature zone NACE-stacking methods were applied.     

Analysis of basic hair dyes by HPLC with on-line post-column photochemical derivatisation

Summary A reversed phase liquid chromatographic method is proposed for the analysis of basic hair dyes (raw materials and colourant formulations). The performance of the method was enhanced by introducing post-column on-line photochemical derivatisation in combination with a Diode Array Detector. On-line photoderivatisation provided an effective way of selectively transforming the analytes to compounds with different spectral properties. For each analyte two characteristic UV-Visible spectra (photoreactor on and off) were obtained with the same mobile phase and this information in combination with the chromatographic data (k' at pH 3.0 and 4.5) enabled the unambiguous identification of both commonly used, approved, and banned basic hair dyes. Additionally, this approach was found useful to improve the method sensitivity, allowing the determination of analytes present in low concentration (0.03%) in complex commercial formulations.This work constitutes part of the thesis for the Dottorato di Ricerche of Roberto Gotti.     

Non-aqueous capillary zone electrophoresis method for the analysis of paroxetine, tamoxifen, and their main metabolites in urine

The potential of non-aqueous capillary electrophoresis (NACE) was investigated for the simultaneous separation of paroxetine, tamoxifen, and their main metabolites. Baseline separation of the studied solutes was obtained on a  μm capillary using a non-aqueous buffer composed of 18 mM ammonium acetate and 1.1% acetic acid in 80:20 (v/v) methanol-acetonitrile, with a temperature and voltage of 22 °C and 15 kV, respectively. Clomipramine was used as internal standard. Aspects such as stability of the solutions, linearity, accuracy, precision and ruggedness were examined in order to validate the proposed method. Detection limits obtained for all the studied compounds ranged between 3.0 and 7.1 μg l⁻¹. The developed method is sensitive and robust and was used to determine paroxetine, tamoxifen, and their metabolites at clinically relevant levels in human urine. Before NACE determination, the samples were purified and enriched by means of an extraction-pre-concentration step with a pre-conditioned C₁₈ cartridge. Determination of these analytes in the urine of four females urines was demonstrated.     

Contactless conductivity detection of synthetic polymers in non-aqueous size-exclusion electrokinetic chromatography

A capacitively coupled contactless conductivity detection (CCD) system has been applied for the detection of neutral synthetic polymers in capillary size-exclusion electrokinetic chromatography (SEEC). Polystyrene standards, that were used as a model compounds, were separated on a capillary column packed with porous 10 microm silica particles with an electrokinetically driven mobile phase, and detected by CCD and UV detection simultaneously. Mass-calibration curves for polystyrene were constructed. Satisfactory results were obtained for the linearity, the run-to-run repeatability (<0.2% for the relative retention and <4% for the peak area) and the robustness of the detector. One of the major issues in this preliminary study was to investigate the origin of the peaks observed for the polystyrene standards. The effect of the molar mass of the polystyrenes on the sensitivity was small. Therefore, the signals obtained could not be explained as the result of an increased viscosity and a decreased solution conductivity of the solute zone. An alternative hypothesis is suggested, and recommendations for further research are given.     

Solvothermal synthesis and characterisation of La1−xAxMnO3 nanoparticles

The synthesis of La_1−xA_xMnO₃ (A=Ca, Sr, Ba) nanoparticles in nonaqueous solvents has been studied. For this solvothermal procedure benzyl alcohol and acetophenone were chosen as reaction media. After this treatment in mild conditions a precipitate was obtained, which, however, can be annealed to the crystalline perovskite structure. Our results show that acetophenone is more suited to obtain the clean pervoskite phase than benzyl alcohol.     

非水滴定法测定苯唑醇含量的研究

建立了农药中间体苯唑醇的分析方法，用指示剂法和电位法对苯唑醇进行了非水滴定的研究，测定结果与高效液相色谱(HPLC)法基本一致，相对标准偏差≤0．20％。     

Fluorescence derivatisation of amino acids in short and long-wavelengths

3-(Naphthalen-1-ylamino)propanoic acid was coupled to the amino group of the main and lateral chains of various amino acids in order to evaluate its applicability as a fluorescent derivatising reagent. The resulting amino acid derivatives are strongly fluorescent with a maximum emission of about 415 nm. Condensation of these derivatives with 5-ethylamino-4-methyl-2-nitrosophenol hydrochloride resulted in the corresponding blue benzo[a]phenoxazinium conjugates, also revealing strong fluorescence in ethanol and water at physiological pH and good quantum yields, but with emission wavelengths between 644 and 657 nm, which was preferable in biological assays.