Extraction chromatography of cobalt and some other metals an silica treated with a mixture of Aliquat 336 and nitroso-R-salt

Summary It was found that cobalt is strongly retained on silica treated with a mixture of Aliquat 336 and nitroso-R-salt and can be separated by column extraction chromatography from cadmium, lead, zinc, mangan, nickel, copper and iron (III) which were eluted with 0.05M solution of perchloric acid. Cobalt was quantitatively eluted with 1 M perchloric acid and subsequently determined by atomic absorption spectrophotometry Cobalt was also concentrated from very dilute aqueous solutions by frontal analysis on small columns packed with the same sorbent, eluted together with a stationary phase with methanol and subsequently determined spectrophotometrically at 466nm; in this way a 500 fold concentration of cobalt was achieved permitting the determination of cobalt at the ppb level.     

Determination of trace amounts of mercury(II) in water samples using a novel kinetic catalytic ligand substitution reaction of hexacyanoruthenate(II)

A simple, sensitive, selective and rapid kinetic catalytic method has been developed for the determination of Hg(II) ions at micro-level. This method is based on the catalytic effect of Hg(II) ion on the rate of substitution of cyanide in hexacyanoruthenate(II) with nitroso-R-salt (NRS) in aqueous medium and provides good accuracy and precision. The concentration of Hg(II) catalyst varied from 4.0 to 10.0 × 10⁻⁶ M and the progress of reaction was followed spectrophotometrically at 525 nm (λ_max of purple-red complex [Ru(CN)₅NRS]³⁻,  = 3.1 × 10³ M⁻¹ s⁻¹) under the optimized reaction conditions; 8.75 × 10⁻⁵ M [Ru(CN)₆⁴⁻], 3.50 × 10⁻⁴ M [nitroso-R-salt], pH 7.00 ± 0.02, ionic strength, I = 0.1 M (KCl), temp 45.0 ± 0.1 °C. The linear calibration curves, i.e. calibration equations between the absorbance at fixed times (t = 15, 20 and 25 min) versus concentration of Hg(II) ions were established under the optimized experimental conditions. The detection limit was found to be 1.0 × 10⁻⁷ M of Hg(II). The effect of various foreign ions on the proposed method has also been studied and discussed. The method has been applied to the determination of mercury(II) in aqueous solutions.     

Trace determination of thiosulphate and thioglycolic acid using novel inhibitory kinetic spectrophotometric method

Sulphur containing compounds such as sodium thiosulphate (STS) and thioglycolic acid (TGA) inhibit the rate of cyanide substitution by nitroso-R-salt (NRS) in hexacyanoruthenate(II) catalysed by Hg(II) ions due to their strong binding tendencies with Hg(II) catalyst. This inhibitory effect of sodium thiosulphate and thioglycolic acid is used as the basis for their determination at micro levels. The reaction was followed spectrophotometrically at 525 nm (λ_max of [Ru(CN)₅NRS]³⁻ complex) under optimised reaction conditions at 8.75 × 10^− 5 M [Ru(CN)₆⁴⁻], 3.50 × 10^− 4 M [NRS], pH 7.00 ± 0.02, ionic strength (µ) 0.1 M (KCl) and temp 45.0 ±0.1 °C. The modified mechanistic scheme is proposed to understand the inhibition caused by sulphur containing compounds (STS and TGA) on Hg(II) catalysed substitution of cyanide by NRS in [Ru(CN)₆]⁴⁻. The range of analytical concentration of inhibitor depends upon two factors; the amount of Hg(II) catalyst present in the indicator reaction and the stability of the Hg(II)-inhibitor complex under consideration. Under optimum conditions STS and TGA have been determined in the range of 0.98-7.0 × 10^− 6 M and 0.30-7.0 × 10^− 6 M. The detection limits for STS and TGA were found to be 3.0 × 10^− 7 M and 1.0 × 10^− 7 M respectively.