One-pot synthesis of an ionic half-sandwich complex of neodymium. Application to isoprene polymerisation catalysis

The reaction of one equivalent of Nd(BH₄)₃(THF)₃ with an half equivalent of dialkylmagnesium in the presence of a stoichiometric amount of pentamethylcyclopentadiene cleanly affords a new kind of half-sandwich of neodymium that is stable toward comproportionation. This strategy can be advantageously applied to generate in situ catalysts allowing the controlled polymerisation of isoprene.     

Ein neuer Strukturtyp mit flächenverknüpften BaO6-Oktaedern: Ba6Nd2Al4O15

Summary A compound Ba₆Nd₂Al₄O₁₅ with a new structure-type was prepared by solid state reaction. It crystallizes with hexagonal symmetry, space group C _6v ⁴ – P 6₃mc;a=11.5696;c=6.9662 Å;z=2. Ba₆Nd₂Al₄O₁₅ has a dominating Ba/O-framework with incorporated AlO₆-octahedra and AlO₄-tetrahedra. A main feature of the structure are face connected BaO₆-octahedra. One of the point positions of the heavy atoms is occupied statistically by Ba²⁺ and Nd³⁺.

     

Et2NH2[Nd(S2CNEt2)4]的晶体结构和生成反应焓变

在干燥氮气气氛下,以无水乙醇为溶剂,制备了低水合氯化钕与二乙氨基荒酸二乙铵(D-DDC)配合物,确定其组成为Et2NH2[Nd(S2CNEt2)4].单晶结构分析表明,配合物中4个二乙氨基荒酸根各通过2个硫原子与钕离子成键形成八配位十二面体阴离子,并与二乙铵阳离子形成缔合型分子.晶体属单斜晶系,空间群P21/n,a=1.37517(14)nm,b=2.1146(2)nm,c=1.44641(15)nm,β=102.028(2)°,Z=4.用微量热法测定了298.15K下水合氯化钕和D-DDC在无水乙醇中的溶解焓及二乙氨基荒酸钕液相生成反应焓变分别为(-17.89±0.096),(50.280±0.151)和(-10.116±0.065)kJ/mol,求得固相生成反应焓变.     

Solvent effect in cis-1,4 polymerization of 1,3-butadiene by a catalyst based on neodymium

In this work a laboratory polymerization scale process was studied for the production of polybutadiene with high content of cis-1,4 repeating units. A Ziegler-Natta catalytic system based on neodymium versatate (catalyst), diisobutylaluminium hydride (cocatalyst) and tert-butyl chloride (chlorinating agent) was used. The influence of solvent nature (pure grade) and possible contaminants (electron donors) in a recovered solvent from a butadiene-styrene anionic polymerization industrial plant on the stereoselectivity and catalytic activity, molecular weight and molecular weight distribution of the resultant polybutadienes was studied. The polymers were characterized by infrared spectroscopy and size exclusion chromatography. Polybutadienes with cis-1,4 units content in the range of 99-98% were produced. The polymers weight-average molecular weight, , varied from 2.23 × 10⁵ to 4.47 × 10⁵ and the molecular weight distribution, MWD, from 3.1 to 5.1.     

Biolabeling with nanoparticles based on Y2O3: Nd and luminescence detection in the near-infrared

Neodymium based fluorescence presents several advantages in comparison to conventional rare earth or enzyme-substrate based fluorescence emitting sources (e.g.Tb, HRP) . Based on this fact we have herein explored a Nd-based fluoroimmunoassay. We efficiently detected the presence of an oxidized low-density lipoprotein (oxLDL) in human plasma a well-known marker for cardiovascular diseases, which causes around 30% of deaths worldwide. Conventional fluoroimmunoassay uses time-resolved luminescence techniques, with detection in the visible range, to eliminate the fluorescence background from the biological specimens. By using an immunoassay based on functionalized Y₂O₃:Nd³⁺ nanoparticles, where the excitation and emission processes in the Nd³⁺ ion occur in the near-infrared (NIR) region, we have succeeded in eliminating the interferences from the biological fluorescence background, avoiding the use of time-resolved techniques. This yields higher emission intensity from the Nd³⁺-nanolabels and efficient detection of anti-oxidized low-density lipoproteins (anti-oxLDL) by Y₂O₃:Nd³⁺-antibody-antigen conjugation, leading to a novel biolabeling method.     

Structural,optical and dielectric relaxor properties of neodymium doped cubic perovskite (Ba1−xNd2x/3)(Zr0.3Ti0.7)O3

Neodymium doped Barium Zirconate Titanate (Ba_1−xNd_2x/3)(Zr_0.3Ti_0.7)O₃ (x = 0.00, 0.02, 0.04, 0.06, 0.08, 0.10) ceramics were prepared using the solid state reaction route. Structural characterizations of the materials were done by using X-ray diffraction and Raman spectroscopy. XRD study suggested that all the compositions were of single phase cubic perovskite structure with space group Pm-3m while Raman spectra revealed that the replacement of the Ba²⁺ ions by Nd³⁺ ions significantly reduced the intensity of the Raman active modes and shifted them towards higher energy side. Room temperature optical property was analyzed by photoluminescence spectroscopy, which confirmed formation of shallow defects in the band gap. Photoluminescence property was attributed to the presence of polar [TiO₆] distorted clusters in the globally cubic matrix. As a result PL emission spectra of these materials were found to belong to violet–blue regions. Microstructural study of sintered pellets revealed that the grain sizes increase with increase in doping concentration. The temperature dependence of the dielectric properties was investigated in the frequency range 1 kHz to 1 MHz. The broadening in the dielectric constant peak around the phase transition temperature and shifting of the temperature maximum towards higher temperatures with increase in frequency indicated a relaxor type of behavior.     

ICP-MS法测定鼠脊髓液中超痕量镧、铈、镨和钕

采用ＮＨＯ３＋ＨＣｌＯ４混合酸溶样,感耦等离子体－质谱（ＩＣＰ－ＭＳ）直接测定鼠脊髓液中Ｌａ、Ｃｅ、Ｐｒ和Ｎｄ,对等离子体质谱测定条件进行了最佳化选择。选用铼（Ｒｅ）内标可补偿基体影响和仪器漂移。方法检出限为７．６－２０．３ｎｇ／Ｌ,加标试验回收率为９４％－１０２％,相对标准偏差（ＲＳＤ）为２．１％－３．７％。     

The spectrum of Nd in rare earth orthoaluminates. The trigonal to orthorhombic transition study of the level

Some structural and spectroscopic features of rare earth orthoaluminates are examined.The trigonal→ orthorhombic transition is studied in a series of Nd_xSm_1−xAlO₃ compounds. The evolution of the crystal structure is followed by X-ray analysis and optical absorption. The free ion and crystal field parameters of Nd³⁺ (4f³ configuration) are determined in LuAlO₃:Nd³⁺.The anomaly of the calculated splitting of the levels is slight, but well characterized in NdAlO₃. The spin correlated crystal field and orbitally correlated crystal field models are tested as well as an empirical correction which was proposed earlier.     

Syntheses and Crystal Structures of Potassium–Lanthanoid(III) Complexes with the 1,2‐Benzenedisulfonate Ligand

The complexes [K(H₂O)₂LnL₂] (Ln = La or Nd; L = 1,2‐benzenedisulfonate) and [K(H₂O)Yb(H₂O)₄L₂] were initially isolated fortuitously from attempts to prepare the corresponding Ln₂L₃ complexes from Ln₂O₃ and H₂L in water. Indeed the bulk products from these reactions have the composition Ln₂L₃. Subsequently, deliberate syntheses by reacting equimolar amounts of Ln₂L₃ with K₂L in water gave the complexes in good yield. X‐ray crystal structures of [K(H₂O)₂LnL₂] (Ln = La or Nd) showed the complexes to be isostructural with a two dimensional polymeric network structure in which LnL₂ units are linked into chains crosslinked by potassium ions. Each Ln is nine coordinate with solely sulfonate oxygen donor atoms. Between adjacent lanthanoid ions there are three different types of sulfonate bridges and two examples of each. Most noteworthy is highly unsymmetrical bridging through μ‐η²‐sulfonate oxygen atoms. Consequently, one Ln–O bond is ca. 0.5 Å longer than the other eight. Potassium is nine‐coordinate with seven sulfonate oxygen atoms and two aqua ligands, and surprisingly <K–O(sulfonate)> is much longer than <K–O(H₂O)>. Pairs of potassium ions are linked by two μ‐η²‐sulfonate oxygen atoms, which are unsymmetrically bridging. The structure of [K(H₂O)Yb(H₂O)₄L₂] comprises discrete tetranuclear units containing two independent ytterbium ions, each coordinated by four water molecules and two chelating (via seven membered rings) disulfonate ligands, and two potassium ions, each coordinated by six sulfonate oxygen atoms and a water molecule. For each potassium, four of the coordinated sulfonate oxygen atoms are from sulfonate ligands bonded to one ytterbium atom and two from sulfonate ligands attached to the other ytterbium atom. In contrast to the Nd and La complexes, <K–O(sulfonate)> is shorter than <K–O(H₂O)>.     

Capillary electrophoresis coupled with in‐column fiber‐optic laser‐induced fluorescence detection for the rapid separation of neodymium

In this study, in‐column fiber‐optic (ICFO) laser‐induced fluorescence (LIF) detection technique is coupled with capillary electrophoresis (CE) for the rapid separation of neodymium for the first time. The effects of buffer concentration, buffer pH, and separation voltage on the CE behaviors, including electrophoretic efficiency and detection sensitivity, are investigated in detail. Under the optimal condition determined in this study (15 mM borate buffer, pH 10.50, separation voltage 24 kV), neodymium could be separated effectively from the neighboring lanthanides (praseodymium and samarium) within several minutes, and the limit of detection for neodymium is estimated to be at the ppt level. The ICFO‐LIF‐CE system assembled in this study exhibits unique performance characteristics such as low cost and flexibility. Meanwhile, the separation efficiency and detection sensitivity of the assembled CE system are comparable to or somewhat better than those obtained in the previous traditional CE systems, indicating the potential of the assembled CE system for practical applications in the fields of spent nuclear fuel analysis, nuclear waste disposal/treatment, and nuclear forensics.