Immobilizing redox enzymes at mesoporous and nanostructured electrodes

Three key challenges are stimulating intensive research in the development of productive direct electron transfer mode enzyme electrodes: proper enzyme orientation, high enzyme loading, and full retention of enzyme activity. In this review, we summarize some significant advances that have been reported in the last years on the design of mesoporous and nanostructured electrodes as enzyme scaffolds and of innovative methodologies for wiring enzymes to electrodes. Particular attention is given to investigations on physical factors that determine a favorable enzyme immobilization, to provide rational guidelines for the design of productive enzymatic electrodes. Finally, some emerging trends focused on the spatial organization of either single enzymes or enzyme cascades are also briefly addressed.     

Electronic transport properties of bismuth nanobridges through silicon-nitride membranes

The electronic transport through nanostructured bismuth nanobridges has been investigated at low temperatures (T<2 K) and in magnetic fields B up to 8.5 T. The samples show reproducible resistance fluctuations as a function of B, superimposed on a large magnetoresistance of up to 50%. In addition, time-dependent resistance fluctuations in zero magnetic field demonstrate the presence of bistable scatterers in the constriction region of our samples, which are described by two-level systems. Their dynamics are shown to be sensitive to subtle modifications of the static scatterer configuration in their vicinity, which cannot be detected in the sample magnetofingerprint.     

Pulsed laser deposition of nanostructured Ag films

Ultra-thin (0.5-5 nm) films of Ag have been prepared by pulsed laser deposition in vacuum using a 26 ns KrF excimer laser at 1 J cm⁻². The deposition was controlled using a Langmuir ion probe and a quartz crystal thickness monitor. Transmission electron microscopy showed that the films are not continuous, but are structured on nanometer size scales. Optical absorption spectra showed the expected surface plasmon resonance feature, which shifted to longer wavelength and increased in strength as the equivalent film thickness was increased. It is shown that Maxwell Garnett effective medium theory can be used to calculate the main features of optical absorption spectra.     

The effect of oxidation on physical properties of porous silicon layers for optical applications

In order to understand the optical loss mechanisms in porous silicon based waveguides, structural and optical studies have been performed. Scanning and transmission electron microscopic observations of porous silicon layers are obtained before and after an oxidation process at high temperature in wet O₂. Pore size and shape of heavily p-type doped Si wafers are estimated and correlated to the optical properties of the material before and after oxidation. The refractive index was measured and compared to that determined by the Bruggeman model.     

The surface and materials science of tin oxide

The study of tin oxide is motivated by its applications as a solid state gas sensor material, oxidation catalyst, and transparent conductor. This review describes the physical and chemical properties that make tin oxide a suitable material for these purposes. The emphasis is on surface science studies of single crystal surfaces, but selected studies on powder and polycrystalline films are also incorporated in order to provide connecting points between surface science studies with the broader field of materials science of tin oxide. The key for understanding many aspects of SnO₂ surface properties is the dual valency of Sn. The dual valency facilitates a reversible transformation of the surface composition from stoichiometric surfaces with Sn⁴⁺ surface cations into a reduced surface with Sn²⁺ surface cations depending on the oxygen chemical potential of the system. Reduction of the surface modifies the surface electronic structure by formation of Sn 5s derived surface states that lie deep within the band gap and also cause a lowering of the work function. The gas sensing mechanism appears, however, only to be indirectly influenced by the surface composition of SnO₂. Critical for triggering a gas response are not the lattice oxygen concentration but chemisorbed (or ionosorbed) oxygen and other molecules with a net electric charge. Band bending induced by charged molecules cause the increase or decrease in surface conductivity responsible for the gas response signal. In most applications tin oxide is modified by additives to either increase the charge carrier concentration by donor atoms, or to increase the gas sensitivity or the catalytic activity by metal additives. Some of the basic concepts by which additives modify the gas sensing and catalytic properties of SnO₂ are discussed and the few surface science studies of doped SnO₂ are reviewed. Epitaxial SnO₂ films may facilitate the surface science studies of doped films in the future. To this end film growth on titania, alumina, and Pt(1 1 1) is reviewed. Thin films on alumina also make promising test systems for probing gas sensing behavior. Molecular adsorption and reaction studies on SnO₂ surfaces have been hampered by the challenges of preparing well-characterized surfaces. Nevertheless some experimental and theoretical studies have been performed and are reviewed. Of particular interest in these studies was the influence of the surface composition on its chemical properties. Finally, the variety of recently synthesized tin oxide nanoscopic materials is summarized.     

Chemically Sensitive Field‐Effect Transistors and Chemiresistors: New Materials and Device Structures

Electronic sensor technology remains of widespread and intense interest. There are compelling needs to detect chemical species ranging from small molecules dispersed in the gas phase to complex biopolymers in aqueous solution. This review describes some recent advances in three main areas: chemically sensitive resistors (chemiresistors, CRs) including inorganic and organic based devices, field effect transistors (FETs) with semiconducting layers and/or gates with chemical sensitivity, and sensors based on the differential conductivity of nanotubes and nanowires. Results reported in the last two to three years are emphasized, highlighting some current trends in the development of sensors for applications such as diagnostics, process monitoring, and security.     

Nanostructured ZrO2 and Zr‐C‐N Coatings from Chemical Vapor Deposition of Metal‐Organic Precursors

Nanocrystalline zirconium carbonitride (Zr‐C‐N) and zirconium oxide (ZrO₂) films were deposited by chemical vapor deposition (CVD) of zirconium‐tetrakis‐diethylamide (Zr(NEt₂)₄) and ‐tert‐butyloxide (Zr(OBu^t)₄), respectively. The films were deposited on iron substrates and characterized by scanning electron microscopy (SEM), X‐ray diffraction (XRD) and X‐ray photoelectron spectroscopy (XPS). The Zr‐C‐N films show blue, golden brown or bronze colours, with colour stability depending upon the precursor composition (pure metal amide or mixed with Et₂NH). The deposition temperature showed no pronounced effect on the granular morphology of the Zr‐C‐N films. The XRD data of the films correspond to the formation of carbonitride phase whereas the XPS analyses revealed a strong surface oxidation and incorporation of oxygen in the film. The films deposited using a mixture of Zr(NEt₂)₄ and Et₂NH showed higher N content, better adhesion and scratch resistance when compared to films obtained from the CVD of pure Zr(NEt₂)₄. Subject to the precursor composition and deposition temperature (550‐750 °C), the microhardness values of Zr‐C‐N films were found to be in the range 2.11‐5.65 GPa. For ZrO₂ films, morphology and phase composition strongly depend on the deposition temperature. The CVD deposits obtained at 350 °C show tetragonal ZrO₂ to be the only crystalline phase. Upon increasing the deposition temperature to 450 °C, a mixture of tetragonal and monoclinic modifications was formed with morphology made up of interwoven elongated grains. At higher temperatures (550 and 650 °C), pure monoclinic phase was obtained with facetted grains and developed texture.     

Thermoresponsive nanostructured poly(N-isopropylacrylamide) hydrogels made via inverse microemulsion polymerization

The synthesis of nanostructured poly(N-isopropylacrylamide) (polyNIPA) hydrogels by a two-stage polymerization process is reported here. The process involves the synthesis of slightly crosslinked polyNIPA nanoparticles by inverse (w/o) microemulsion polymerization; then, these particles are dried, cleaned and dispersed in an aqueous solution of NIPA and a crosslinking agent (N,N-methylene-bis-acrylamide or NMBA) and polymerized to produce the nanostructured hydrogels. Their swelling and de-swelling kinetics, volume phase transition temperatures (T _VPT) and mechanical properties at the equilibrium swollen state are investigated as a function of the weight ratio of polyNIPA particles to monomer (NIPA). The nanostructured gels exhibit larger equilibrium water uptake, faster swelling and de-swelling rates and similar T _VPT than those of the conventional ones; moreover, the elastic and Young moduli are larger than those of the conventional hydrogels at similar swelling ratios. The fast swelling and de-swelling kinetics are explained in terms of the controlled inhomogeneities introduced by the method of synthesis.     

Boron-iron nanochains for selective electrocatalytic reduction of nitrate

The electrocatalysis of nitrate reduction reaction(NRR) has been considered to be a promising nitrate removal technology.Developing a highly effective iron-based electrocatalyst is an essential challenge for NRR.Herein,boron-iron nanochains(B-Fe NCs) as efficient NRR catalysts were prepared via a facile lowcost and scalable method.The Fe/B ratio of the B-Fe NCs-x can be elaborately adjusted to optimize the NRR catalytic performance.Due to the electron transfer from boron to metal,the metal-metal bonds are weakened and the electron density near the metal atom centers are rearranged,which are favor of the conversion from NO_3~-into N_2.Moreover,the well-crosslinked chain-like architectures benefit the mass/electron transport to boost the exposure of abundant catalytic active sites.Laboratory experiments demonstrated that the optimized B-Fe NCs catalyst exhibits superior intrinsic electrocatalytic NRR activity of high nitrate conversion(～80%),ultrahigh nitrogen selectivity(～99%) and excellent long-term reactivity in the mixed electrolyte system(0.02 mol/L NaCl and 0.02 mol/L Na_2 SO_4 mixed electrolyte),and the electrocatalytic activity of the material shows poor performance at low chloride ion concentration(Nitrate conversion of ～61 % and nitrogen selectivity of ～57% in 0.005 mol/L NaCl and 0.035 mol/L Na_2 SO_4 mixed electrolyte).This study provides a broad application prospect for further exploring the highefficiency and low-cost iron-based functional nanostructures for electrocatalytic nitrate reduction.     

Microwave Irradiation for Accelerating Synthesis of New Chiral Nanostructured Poly(amide-imide)s Having a Thiazole Pendant Group

Microwave irradiation was used to accelerate the polycondensation of a new thiazole-containing diamine with several chiral diacids. Polymerization reactions were carried out in molten tetrabutylammonium bromide as a green molten salt medium and triphenyl phosphite as the homogenizer. A series of new compounds were characterized by Fourier transform-infrared spectroscopy, nuclear magnetic resonance spectroscopy, and elemental analysis techniques. The polymeric samples showed high thermal stability with decomposition temperature being above 360°C; they were in a nanoscale size and were assembled uniformly and randomly in a sponge-like morphology.