Palladium-catalysed three component synthesis of α,β-unsaturated amidines and imidates

Palladium-catalysed three component coupling of an alkenylbromide, isonitrile and an amine or alkoxide/phenoxide affords α,β-unsaturated-amidines and -imidates.     

Magnetic properties of mechanically alloyed Co–Ti powder

An amorphous phase containing traces of non-transformed Co and Ti powders was obtained by mechanical alloying nominal compositions of Co₆₇Ti₃₃ and Co₅₀Ti₅₀ in a high-energy ball-mill. These alloys were prepared from elemental powders of Co and Ti. The heat treatment of Co₆₇Ti₃₃ at 573, 873 and 1173 K crystallized nanoparticles of Co₂Ti and Co₃Ti compounds, while the same treatments conducted on Co₅₀Ti₅₀ resulted in the formation of Co₂Ti and CoTi nanoparticles. The saturation magnetizations reached a maximum value in the amorphous state and they decreased when the temperatures of the heat treatment rose. Demagnetizing interparticle interaction effects were estimated through hysteresis loops and initial magnetization curves using the Fourier technique.     

Ring expansion of 5- to 6-member zirconacycles by carbenoid insertion

A wide range of carbenoids (1-lithio-1-halo species), including those with α-SiR₃, OEt, SPh, SO₂Ph, P(O)(OEt)₂, and CN substituents, insert into 5-member zirconacycles (saturated and unsaturated, mono- and bi-cyclic) to afford functionalized 6-member zirconacycles. 1-Lithio-1-haloalkenes insert to afford 6-member zirconacycles with an alkylidene substituent next to the metal. Unexpected double insertion of some carbenoids, and evidence for endocylic β-hydride transfer processes provide additional mechanistic interest.     

Photoluminescence of Ge(Si)/Si(0 0 1) self-assembled islands in the near infra-red wavelength range

The dependence of photoluminescence spectra of structures with GeSi/Si(0 0 1) self-assembled nanoislands on growth temperature has been investigated. It was shown that the redshift of the island-related photoluminescence peak with a decrease of the growth temperature is associated with suppression of Si diffusion in the islands and an increase of Ge content in them. For the first time a photoluminescence signal from SiGe islands was observed at energies much lower than the Ge band gap. The energy position of the island-related photoluminescence peak is well described by the model of optical transition, which is indirect in real space. The photoluminescence signal at 1.55 μm from GeSi/Si(0 0 1) self-assembled islands was obtained up to room temperature.     

Coexisting antiferromagnetism and ferromagnetism in mechanically alloyed Fe-rich Fe–Ni alloys: implications regarding the Fe–Ni phase diagram below 400°C

Fe–Ni alloys below the Invar region with compositions Fe_100−xNi_x (x=21, 24, and 27 at%) were prepared by high-energy ball milling technique (mechanical alloying). The as-milled samples, characterized by X-ray diffraction and Mössbauer spectroscopy, contain a mixture of (BCC) and γ (FCC) phases, whereas the samples annealed at 650°C for 0.5 h show a single γ (FCC) phase displaying a single line Mössbauer spectrum at room temperature (RT). At low temperature, the Mössbauer spectra of annealed Fe₇₆Ni₂₄ and Fe₇₃Ni₂₇ alloys show the existence of a magnetically split pattern together with a broad singlet, which are ascribed to a high-moment ferromagnetic Ni-rich phase and a low-moment Fe-rich phase, respectively. The Fe-rich phase in annealed Fe₇₆Ni₂₄ alloy, which is paramagnetic at RT, undergoes antiferromagnetic ordering at 40 K, estimated from the dramatic line broadening of its spectrum, giving rise to a small hyperfine field (e.g. 2 T at 6 K). The coexistence of these phases is attributed to phase segregation occurring in these alloys as a result of enhanced atomic diffusion. The stability of these alloys towards martensitic (FCC→BCC) transformation at low temperatures is discussed in connection with the Fe–Ni phase diagram below 400°C.     

Mechanical alloying of a thermoelectric alloy: Pb0.65Sn0.35Te

We report in this paper a study of the mechanical alloying (MA) process for the Pb_0.65Sn_0.35Te alloy. MA has been carried out in a high-energy planetary ball mill. The mechanism of formation has been studied from systematic analyses of mechanically alloyed powders using X-ray diffraction, differential scanning calorimetry and scanning electron microscopy. As it was already observed for the MA of PbTe, this synthesis is associated with an exothermic reaction between the elemental powders. The required time to reach an homogeneous phase Pb_0..65Sn_0.35Te is 31 h.     

A new and versatile Ugi/SNAr synthesis of fused 4,5-dihydrotetrazolo[1,5-a]quinoxalines

A combinatorial synthetic route yielding fused tetrazolo[1,5-a]quinoxalines is described. The use of 2-fluorophenylisocyanide in the Ugi-tetrazole reaction (tetrazole-U-4CR) followed by a nucleophilic aromatic substitution (S_NAr) affords the tricylic tetrazolo[1,5-a]quinoxaline moiety in good yields and with high diversity.     

熔融碳酸盐燃料电池阳极材料表面改性

选择铌作为合金化元素，通过氟化物熔盐电化学表面合金化的方法对熔融碳酸盐燃料电池阳极材料镍进行表面改性，改性后的阳极材料的耐蚀性能与电催化性能均得到明显的改善。     

Selenium in electrolytic manganese as a reference material for the quality control of aluminium melts

Electrolytic manganese is an important alloying element for aluminium and steel melts. It is mainly added to melts of aluminium in the holding furnace as tablets or minitablets (compressed compacts of manganese and aluminium powders). Selenium derivates are usually added during the production of electrolytic manganese, so some selenium is present in the alloys produced when electrolytic manganese is added to the aluminium furnace. Since the selenium contents of many alloys are of concern from health and environmental perspectives, their values should be provided. In this work, a laboratory reference material (LRM) based on electrolytic manganese was produced to assure our routine quality control method, where selenium is analysed by hydride generation followed by optical emission spectrometry with inductively coupled plasma (HG–ICP–OES). Therefore, the present paper describes in detail the preparation procedure for and the results from homogeneity and stability studies performed on electrolytic manganese LRM. For this purpose, a commercial electrolytic manganese lot was selected and the main factors involved in the preparation of the material (pretreatment step, homogenization, bottling and storage) were carefully studied and established in order to guarantee the long-term stability of the LRM. The results obtained showed that the LRM developed was a fit-for-purpose material for the quality control of the routine analysis of selenium.     

Preparation of Fe/B powders by mechanical alloying

Steels with a high boron content are valuable as a neutron shield in waste containers and as control absorbers in nuclear reactors. The purpose of this study was to obtain by mechanical alloying an iron powder with 50% boron (by weight) and then powder-metallurgy materials. The elementary powders were mixed in a high-energy mill for 36 h in an inert atmosphere. Samples were withdrawn at intervals, and the powder was characterized by differential thermal analysis, X-ray diffraction and electron microscopy. The Fe/B powders withdrawn at different intervals of milling were diluted with further additions of iron up to a final content of 10% boron. The mixtures were uniaxially compacted at 500 MPa; their green density was verified, and they were sintered in argon at 1150°C. Their physical properties (density and dimensional change) and bending strength were evaluated and microstructural studies and fracture tests were performed.