Thermal analysis of renal stones

The chemical composition of 200 renal stones, collected from Taxila, Rawalpindi and Islamabad regions in Pakistan, was determined by thermogravimetric (TG) and differential thermal analysis (DTA) techniques. The thermal curves show weight losses at various temperatures indicating dehydration and decomposition phenomena of renal stones. Results were compared with qualitative data obtained by IR analysis which confirmed the chemical composition of various stones in the solid state. The thermal curves helped in the differentiation of various kinds of water held by stones and their chemical composition was obtained by weight loss during pyrolysis. It was found that 26.5% of the stones were pure whewellite, 3% weddellite, 13% uric acid anhydrous, 7.5% struvite, 2.5% ammonium acid urate, 0.5% cystine and 47% stones had mixed composition. In the mixed state the most frequent combinations were those of calcium oxalate with uric acid (14.5%) and with phosphates (27.5%).

---

Zusammenfassung Mittels TG und DTA wurde die chemische Zusammensetzung von 200 Nierensteinen untersucht, die in den Gebieten Taxila, Rawalpindi und Islamabad in Indien gesammelt wurden. Die Thermogramme zeigen Masseverluste bei verschiedenen Temperaturen, die auf Dehydratation und Zersetzung der Nierensteine hinweisen. Die Ergebnisse wurden mit den qualitativen Resultaten aus der IR-Analyse verglichen, welche die chemische Zusammensetzung der verschiedenen Steine im festen Zustand bekräftigte. Die Thermogramme halfen bei der Unterscheidung von verschieden gebundenem Wasser, ihre chemische Zusammensetzung wurde durch Gewichtsverlust bei der Pyrolyse bestimmt. Man fand, daß 26.5 % der Steine aus reinem Whewellit bestanden, 3 % aus Weddellit, 13 % aus anhydrierter Harnsäure, 7.5 % aus Struvit, 2.5 % aus Ammmoniumhydrogenurat, 0.5 % aus Cystin und 47 % der Steine hatten eine gemischte Zusammensetzung. Die häufigsten Kombinationen der Mischzusammensetzungen waren Calciumoxalat mit Harnsäure (14.5 %) und mit Phosphaten (27.5 %).

     

Thermal decomposition of struvite

Struvite (NH₄MgPO₄·6H₂O) is a mineral often found in urinary tracts and kidneys. Thermal decomposition using slow low heating shows that the 'kidney' stone can be decomposed at temperatures below 40°C. At this temperature both ammonia and water are evolved. If more rapid heating is employed the decomposition occurs at around 80°C. The implication of this work rests with the use of low slow heat for the decomposition of the kidney stones. This revised version was published online in July 2006 with corrections to the Cover Date.     

X射线衍射法在泌尿系结石研究中的应用

泌尿系结石是一种世界范围的常见病、多发病。准确分析尿石的化学成分和物相,有助于了解泌尿系结石的形成机制。X射线衍射法(XRD)是进行泌尿系结石研究的最重要方法之一,用作定性分析时具有可靠性,用作定量分析时具有准确性,且检测简便迅速、灵敏度高、多组分和多晶态可一次性检测。文章综述了XRD在泌尿系结石定性和定量分析中的应用以及XRD与质子激发X射线发射光谱(PIXE)、X射线光电子能谱(XPS)和原子力显微镜(AFM)等联合分析尿石的研究进展。     

Speciation of functional groups formed on the surface of ammoxidised carbonaceous materials by XPS method

X-ray photoelectron spectroscopy (XPS) has been used to investigate the fate of nitrogen functional groups present in carbonaceous materials obtained from European plum (Prunus domestica) stones and modified by ammonia-air mixture at 250 or 300 °C. Peaks have been found in the XPS patterns, corresponding to different nitrogen functional forms i.e. pyrrolic, pyridinic, pyridone, amine and chemisorbed nitrogen oxides. It has been found that the distribution of nitrogen functional forms changes as a result of the modification processes.     

Sunlight curable hybrid organic–inorganic methacrylic‐based coatings: analysis of the cure mechanism and functional properties

An experimental ultraviolet (UV) polymerizable hybrid organic–inorganic protective coating, mainly intended for the surface protection of porous calcareous stone substrates, has been recently proposed and patented. The hybrid product evidenced an extraordinary hydrophobicity character, able to guarantee a high protection of the stone against water actions, as well as a high traspirability. Furthermore, it is able to equal the performance of commercial available coatings, with the important adjunctive advantage to be free solvent. The application of this product involves the use of a “dual curing” treatment, necessary to harden the coating applied on the substrate, representing this latter a technological limit. The dual curing treatment consists of 6 hr of exposure to a UV‐lamp plus 1 hr at 140°C in oven. In order to avoid this procedure, not easy to realize in situ, two different modifications of the composition of the hybrid product are proposed in this paper. The first one allows the photopolymerization of the hybrid coating only by sunlight exposure. The second one, even though requiring a UV exposure to photo‐polymerize the coating, does not need the subsequent thermal treatment at 140°C. Several experimental characterizations were performed on the newly developed hybrid products, in order to select an optimal composition for the formulations. The selected innovative products were, finally, applied on a calcareous stone substrate, typical of Apulia Region (Pietra Leccese, PL). Both coatings exhibit excellent water‐repellent action and a slight variation of the natural stone color. Copyright © 2014 John Wiley & Sons, Ltd.     

Evaluation of an activated carbon from olive stones used as an adsorbent for heavy metal removal from aqueous phases

The performance of a microporous activated carbon prepared chemically from olive stones for removing Cu(II), Cd(II) and Pb(II) from single and binary aqueous solutions was investigated via the batch technique. The activated carbon sample was characterized using N₂ adsorption–desorption isotherms, SEM, XRD, FTIR, and Boehm titration. The effect of initial pH and contact time were studied. Adsorption kinetic rates were found to be fast and kinetic experimental data fitted very well the pseudo-second-order equation. The adsorption isotherms fit the Redlich–Peterson model very well and maximum adsorption amounts of single metal ions solutions follow the trend Pb(II) > Cd(II) > Cu(II). The adsorption behavior of binary solution systems shows a relatively high affinity to Cu(II) at the activated carbon surface of the mixture with Cd(II) or Pb(II). An antagonistic competitive adsorption phenomenon was observed. Desorption experiments indicated that about 59.5% of Cu(II) and 23% of Cd(II) were desorbed using a diluted sulfuric acid solution.     

A study of primary nucleation of calcium oxalate monohydrate: I‐Effect of supersaturation

There are various organic and inorganic constituents in kidney stones. Among them, calcium oxalate monohydrate (COM) is the primary inorganic constituent of kidney stones. However, the mechanisms of formation of kidney stones are not well understood. In this regard, a basic study is carried out for better understanding of nucleation, crystal growth and/or aggregation of formed COM crystals. The primary nucleation of calcium oxalate monohydrate is studied at the laboratory scale using turbidity measurements. Calcium chloride and potassium oxalate solutions are mixed and then added to a Turbidimeter tube for continuous recording of turbidity. Induction time (time to induce formation of detectable crystals) is estimated from time‐turbidity graphs. The effect of some urinary species, such as oxalate and calcium, on nucleation and crystallization characteristics of COM is determined by particle size distribution analysis, measuring weight of crystals and calculation of relative supersaturation. The classical nucleation theory is applied at high supersaturation ratios (SR) ranging from 1.6 to 2.2. The results indicate that nucleation rate increases with increasing supersaturation ratio from 0.81 × 10²⁸ nuclei/cm³.sec at 1.6 SR, to 18.02 × 10²⁸ nuclei/cm³.sec at 2.2 SR. On the other hand, free energy change and radius of critical nucleus are decreased as supersaturation ratio is increased. The nucleation rates are higher than those reported in literature. Such discrepancy is discussed on the bases of differences in experimental techniques. (© 2004 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

TOF‐SIMS study of cystine and cholesterol stones

Two different human stones, cystine and cholesterol from the kidney and gall bladder, were examined by time‐of‐flight secondary ion mass spectrometry using Ga⁺ primary ions as bombarding particles. The mass spectra of kidney stone were compared with those measured for the standard compounds, cystine and cysteine. Similar spectra were obtained for the stone and cystine. The most important identification was based on the existence of the protonated molecules [M + H]⁺ and deprotonated molecules [M‐H]^‐. The presence of cystine salt was also revealed in the stone through the sodiated cystine [M + Na]⁺ and the associated fragments, which might be due to the patient treatment history. In the gallstone, the deprotonated molecules [M‐H]⁺ of cholesterol along with relatively intense characteristic fragments [M‐OH]⁺ were detected. Copyright © 2012 John Wiley & Sons, Ltd.     

Natural radioactivity in marble stones- Jordan

Natural radioactivity has been measured in marble stone samples collected from Dabaa'h, Ajloun and Azrak areas using a gamma spectroscopy technique. The measured ²²⁶Ra activities in the stones collected from Dabaa'h quarries varied from 264.9 Bq kg⁻¹ to 369.5 Bq kg⁻¹. In samples from Ajloun and Azrak the maximum values of ²²⁶Ra were 28.3 Bq kg⁻¹ and 23.41 Bq kg⁻¹, respectively. The measured values of ²³²Th were less than 17.89 Bq kg⁻¹. The average values of the radium equivalent activities as well as external and internal hazard indices were also calculated. It was observed that for marble stones from Dabaa'h area, estimated average value of the external hazard index is 0.873 and that of internal hazard index is 1.71.     

Liquid chromatographic determination of dimethadione and trimethadione in human serum on octadecyl treated microporous glass columns

Summary The liquid chromatographic determination of trimethadione (TMO) and its methabolite, dimethadione (DMO) were studied by high-performance liquid chromatography (HPLC) on octadecyl-modified microporous glasses, prepared with toluene solution containing octadecyl-dimethylchlorosilane, using two types of microporous glass with various mean pore diameters and/or specific surface areas. Using acetonitrile-water mixtures as eluents, TMO and DMO in human serum were separated on the glasses studied, but with different degrees of resolution. In this present study, we report the development of a rapid and selective HPLC method for the simultaneous analysis of TMO and DMO in human serum.