基于MOF (Cu)@biochar气凝胶的制备及其在缓释氮肥上的应用

以羧甲基纤维素(CMC)、明胶和MOF(Cu)@biochar为原料,采用简单有效的冷冻干燥方法制备了(CMC/Gelatin/MOF(Cu)@biochar)杂化气凝胶,并用傅里叶变换红外光谱(FT-IR)、热重分析(TG)、X射线粉末衍射(XRD)、扫描电镜(SEM)和X射线光电子能谱(XPS)技术对其进行了表征;研究了MOF(Cu)@biochar含量、pH和不同的盐水溶液对杂化气凝胶溶胀行为的影响;以该气凝胶负载氯化铵,制备了一种新型缓释肥料(SRF),并研究了含2%(wt)SRF的沙性土壤的保水能力;SRF在土壤中第30天的累积释放率为79.4%;肥料在土壤中释放符合非Fickian扩散和阳离子交换的协同作用机理。     

Effect of absorbed pump power on the quality of output beam from monolithic microchip lasers

The dependence of the beam propagation factor (M ² parameter) with the absorbed pump power in the case of monolithic microchip laser under face-cooled configuration is extensively studied. Our investigations show that the M ₂ parameter is related to the absorbed pump power through two parameters (α and β) whose values depend on the laser material properties and laser configuration. We have shown that one parameter arises due to the oscillation of higher order modes in the microchip cavity and the other parameter accounts for the spherical aberration associated with the thermal lens induced by the pump beam. Such dependency of M ² parameter with the absorbed pump power is experimentally verified for a face-cooled monolithic microchip laser based on Nd³⁺ -doped GdVO₄ crystal and the values of α and β parameters were estimated from the experimentally measured data points.     

外FO-群

如果群 G 的所有真商群都是 FO-群,但是群 G 本身不是 FO-群,则称 G 为外 FO-群,本文将给出外 FO-群完全的结构描述．     

Detection of processed genetically modified food using CIM monolithic columns for DNA isolation

The availability of sufficient quantities of DNA of adequate quality is crucial in polymerase chain reaction (PCR)-based methods for genetically modified food detection. In this work, the suitability of anion-exchange CIM (Convective Interaction Media; BIA Separations, Ljubljana, Slovenia) monolithic columns for isolation of DNA from food was studied. Maize and its derivates corn meal and thermally pretreated corn meal were chosen as model food. Two commercially available CIM disk columns were tested: DEAE (diethylaminoethyl) and QA (quaternary amine). Preliminary separations were performed with standard solution of salmon DNA at different pH values and different NaCl concentrations in mobile phase. DEAE groups and pH 8 were chosen for further isolations of DNA from a complex matrix-food extract. The quality and quantity of isolated DNA were tested on agarose gel electrophoresis, with UV-scanning spectrophotometry, and by amplification with real-time PCR. DNA isolated in this way was of suitable quality for further PCR analyses. The described method is also applicable for DNA isolation from processed foods with decreased DNA content. Furthermore, it is more effective and less time-consuming in comparison with the existing proposed methods for isolation of DNA from plant-derived foods.     

Electrochemical Properties of Vanadium Oxide Aerogels and Aerogel Nanocomposites

The electrochemical properties of high surface area transition metal oxide aerogels are extremely interesting because aerogels serve to amplify surface effects. As a result, the electrochemical properties are dominated by surfaces rather than by bulk behavior. In the case of vanadium oxide aerogels this leads to extraordinary electrochemical properties, including an extremely high capacity for lithium and electrochemical responses that are both battery-like and capacitor-like. By exploiting sol-gel synthesis, it is possible to synthesize nanocomposite electrodes in which aerogels are in intimate contact with carbon nanotubes. The resulting nanocomposites exhibit superior electrochemical properties, especially at high discharge.     

Polymerised bicontinuous microemulsions as stationary phases for capillary electrochromatography

Summary Polymerisation of bicontinuous microemulsions yields porous monolithic structures with well defined pore sizes that are potentially suitable for use as stationary phases for capillary electrochromatography (CEC). A variety of pore sizes can be achieved by altering the composition of the microemulsion, which typically consists of butyl methacrylate (BMA) and ethylene glycol dimethacrylate (EGDMA) as the polymerisable oil phase. The aqueous phase consists of water, a surfactant (sodium dodecyl sulphate, SDS) and a co-surfactant (1-propanol). 2-acrylamido-2-methyl-1-propane sulfonic acid (AMPS) is also added to provide charges along the polymer backbone to allow electroosmotic flow (EOF) to occur. SEM analysis shows that in-situ polymerisation yields a monolithic structure with a porous topography. Investigations have shown that these monoliths are easy to prepare, robust and suitable for the separation of phthalates. They generate higher linear velocities than are achieved using the silica based HPLC packings normally used for CEC.     

The potential of serially coupled alkyl-bonded silica monolithic columns for high resolution separations of pharmaceutical compounds in biological fluids

Summary In this paper we investigate the potential of alkyl-bonded silica monolithic columns for the isolation and identification of drug-related components in biological fluids. Up to 6 columns have been connected in series to produce a chromatographic system with up to 40,000 plates. This high-resolution chromatography system has been coupled to both MS and NMR to enable efficient detection and characterisation of drug-related components in biological fluids. The use of six coupled columns has been shown to give enhanced resolution over a high quality silica particulate column packed with 3 μm material which exhibits the same back pressure. The effect of volume and mass load on the performance of monolithic columns for semi-preparative chromatography of biological fluids has also been investigated. In these studies it was possible to inject up to 100 mL of neat urine with no loss of chromatographic performance. Furthermore, upon re-testing, the columns showed similar chromatographic performance. Again several columns were serially connected, producing enhanced resolution in the semi-preparative mode.     

Chiral separation of 1,1'-bi-2-naphthol and its analogue on molecular imprinting monolithic columns by HPLC

Two molecular imprinting polymer (MIP) monolithic columns with (S)-(-)-1,1'-bi-2-naphthol and (R)-(+)-5,5',6,6',7,7',8,8'-octahydro-1,1'-bi-2-naphthol as the templating molecules, respectively, have been prepared by in situ polymerization using 4-vinylpyridine and ethylene dimethacrylate as functional monomer and cross-linker, respectively. The columns with good flow-through properties were obtained by changing the molar ratio of the functional monomer and the template molecule. The effects of mobile-phase composition on separation of enantiomers were systematically investigated. The results indicate that hydrophobic interaction in aqueous solution and hydrogen-bonding interaction in ACN between the enantiomers and polymers could play important roles in the retention and resolution. The effects of chromatographic conditions, such as flow rate, column temperature, sample loading, on the enantioseparation were also studied. Further, these two MIP columns show a cross-reactivity.     

Chiral separations by capillary electromigration techniques in nonaqueous media. II. Enantioselective nonaqueous capillary electrochromatography

A review on the advantages, peculiarities, and the potential of enantioselective capillary electrochromatography (CEC) in nonaqueous media is presented. Some fundamentals on CEC with particular focus on enantioselective CEC are discussed. The strategies, concepts, preferentially utilized chiral selectors and column technologies that have been utilized to succeed in highly efficient enantiomer separations by nonaqueous CEC are described thoroughly.     

Analysis of ecstasy with a monolithic reversed-phase column

Summary A new, rapid, and precise liquid chromatographic method has been developed for simultaneous identification and quantification of amphetamine,N-methyl-3,4-methylenedioxymetamphetamine,N-ethyl-3,4-methylenedioxymetamphetamine, andN-methyl-1-(3,4-methyl-enedioxyphenyl)-2-butanamine in the presence of other constituents. The compounds were separated on a monolithic column with a gradient prepared from acetonitrile and 20mm monobasic potassium buffer at a flow rate of 1.5 mL min⁻¹. Quantitation was performed with metoclopramide as internal standard. Use of different flow rates was investigated and enabled reduction of the separation time from 11 to 3.5 min for seven substances. The method was then applied to ten seized tablets to identify and quantify their active ingredients.