从核磁共振氢谱推导的重质油氢碳原子摩尔比计算式

通过对炼油厂的催化油浆、重催油浆和催化重焦蜡油核磁共振氢谱中质子归属和重质油结构的假设，推导出计算这3种重质油的氢碳原子摩尔比计算式；结果表明，氢碳原子摩尔比的计算值与实测值非常接近，平均误差仅为3．1％。     

MALDI-TOF MS对难溶聚芳酰胺PA6T的分析表征

选用五种样品试剂三氟乙酸、四氢呋喃、甲酸、乙腈、60%乙腈/5%三氟乙酸和两种不同的制样方法,采用基质辅助激光解吸电离飞行时间质谱(MALDI-TOF MS)表征难溶性聚合物聚对苯二甲酸己二酰胺(PA6T)的结构和分子量。发现以60%乙腈/5%三氟乙酸为样品试剂所得谱图的分子质量范围和信噪比最大,且溶剂法一步点样优于无溶剂法制样。获得了离子液体中合成产物PA6T的链结构,表明其主链为线性,未发现环状聚合物的存在,存在三种端基结构聚合体： 两端均为氨基或羧基、或一端为氨基另一端为羧基。采用MALDI-TOF MS和SEC两种方法对比测量了PA6T的平均分子量和分子量分布指数,表明MALDI-OF MS测得的平均分子量低于SEC法,分子量分布指数也低于SEC法,这是由于MS处理数据时忽略了低分子量部分,且高分子量部分因难以离子化而无法得到引起的。对于难溶的聚芳酰胺类聚合物的结构和分子量及其分布表征,MALDI-TOF MS仍不失为一个好方法。     

Measurement principles for traceability in chemical analysis

 By the definition of the mole as a base unit for amount-of-substance measures within the International System of Units (SI), chemists can make chemical measurements in full compliance with established metrological principles. Since the mole requires exact knowledge of the chemical entity, which is often neither available nor of practical relevance to the purpose of the measurement, the SI units of mass or length (for volume) are unavoidable in the expression of results of many chemical measurements. Science, technology, and trade depend upon a huge and ever increasing number and variety of chemical determinations to quantify material composition and quality. Thus, international harmonization in the assessments of processes, procedures, and results is highly desirable and clearly cost effective. The authors, with relevant experience and responsibilities in Europe and America, have found some consensus in the interpretation of the metrological principles for chemical measurements, but believe open discussion should precede wide implementation by chemical communities. In fostering this dialogue, this paper shows, for instance, that more precise interpretation of the definitions for "traceability," "calibration," and "validation" is needed for present-day chemical measurements. Problems that face scientists in making measurements do not all vanish just by adherence to the SI. However, such compliance can improve communication among chemists and metrologists. Received: 30 June 1995 Accepted: 30 June 1995     

Microwave-assisted extraction of high-molecular-weight hemicelluloses from spruce wood

Microwave-assisted extraction (MAE) at atmospheric pressure has been demonstrated as an efficient technology for the extraction of polymeric hemicelluloses from spruce sawdust. This technology was shown to be more efficient than conventional extraction. MAE leads to a high solubilization of wood and a selective extraction of hemicellulose polymers with high molecular weights. To optimize MAE, different treatment powers (125–573 W) of presoaked spruce sawdust in water and 1 M sodium hydroxide solution for a period of 60 min were tested. The yield of hemicellulose extraction increased with the microwave power in both mediums, but with a clear advantage for presoaked samples in basic medium. The characterization of extracted hemicelluloses has shown high extraction selectivity depending on the medium of impregnation of sawdust before MAE: High-molecular-mass acetylated galactoglucomannans (M_w ∼ 41 kDa) were isolated after presoaking in water and higher molecular mass arabinoglucoronoxylans (M_w ∼ 66 kDa) in basic medium.     

COMPLEXATION BEHAVIOR OF POLY(ACRYLIC ACID) AND POLY(ETHYLENE OXIDE) IN WATER AND WATER-METHANOL

To investigate the effects of solvent type and temperature on the interpolymer complexation via hydrogen bonding, a study was made on the complex system of poly(acrylic acid) (PAA) and poly(ethylene oxide) (PEO) in two kinds of solvent systems, pure water and water-MeOH (30 wt%) mixed solvent, at various temperatures using the Ubbelohde viscometer, pH-meter, and UV spectrophotometer. The repeating unit mole ratio at the most optimum complexation as confirmed by the reduced viscosity measurement was shifted from [PEO]/[PAA] ≈ 1.25:1 to 1.5:1 by the addition of methanol to water. From the UV measurement, the deviation from the “isosbestic point” (where the absorbance of the solution remains constant) has presented another evidence for the solvent effect on complexation. In addition, the analysis of the changes in thermodynamic properties upon complexation as well as the fraction of carboxyls associated with PEO oxygens and the complex stability constant as estimated by potentiometric titration at several temperatures reveals that the complex formation in mixed solvent became more unfavorable compared to that in pure solvent at high temperatures above 30°C. This could be explained by considering that in water the hydrophobic interaction as well as the hydrogen bonding may greatly contribute to the stabilization of the polymer complex formed, while in water-methanol the main stabilizing force would be the hydrogen bonding alone.     

自掺杂改性Bi_4O_5X_2(X=Br,I)异质结催化剂的合成及在油田废液处理上的应用

通过调控原料中五水硝酸铋和卤源的比例制备了自掺杂改性Bi_4O_5X_2(X=Br, I)光催化材料,Bi_4O_5X_2(X=Br,I)光催化性能得到明显提升.分别用X射线衍射仪分析催化剂的晶体结构、环境扫描电子显微镜观测催化剂的形貌、紫外可见漫反射分光光度仪测试催化剂的光吸收性能、 ST-MP-9全自动比表面积测试仪测试催化剂的比表面积.通过测定光降解油田污染物丙烯酰胺的吸光度值和化学需氧量(COD)值的变化研究了催化剂的催化活性.结果表明,经过5 h的紫外可见光光降解反应,Bi_4O_5Br_2-Bi2.6降解丙烯酰胺的性能最好,降解率达到58.2%、 COD值降低87.1%.     

红外光谱法测定固相微萃取新型吸附质中单体的摩尔比

以丙烯酸丁酯和苯乙烯为单体 ,过氧化苯甲酰为引发剂 (用量为wt 0 3% ) ,醋酸丁酯和甲苯作混合溶剂 ,溶剂用量与单体混合物的体积相同 ,采用溶液聚合的方法合成了一种新型固相微萃取吸附质 (苯乙烯 丙烯酸丁酯共聚物 )。以朗伯 比耳定律为依据 ,通过一系列的推导过程 ,得出了共聚物中两种官能团的吸收值比与共聚物中两种单体摩尔比的线性关系式A1 /A2 =kn1 /n2 。采用红外光谱法测定聚合物中两种官能团的吸收值比 ,再通过外标曲线法确定了共聚物中两种官能团的吸收值比 (y)与共聚物中两种单体的摩尔比 (x)的线性回归方程 y =0 136 2 0 0 84 1x。方法的精密度RSD(% ) =2 4 6 4 ,方法的回收率为 92 89%～10 3 94 %。红外光谱法测定作为固相微萃取新型吸附质的苯乙烯与丙烯酸丁酯共聚物中单体的摩尔比是一种快速准确的分析方法     

水系锂离子电池负极聚硫代苯醌的合成与电化学性能

通过硫化聚合的方法,以四氯苯醌(TCQ)为单体合成了聚硫代苯醌(PBQS)材料。本文改变S的加入量,探讨了不同摩尔比的S和Na₂S对PBQS电极电化学性能的影响。当S和Na₂S摩尔比为0.4时,形成两个氯原子被硫取代的PBQS-0.4稳定结构。PBQS-0.4电极放电比容量达到140 mAh·g^-1以上,显现出良好的循环稳定性和优异的倍率性能。而当S和Na₂S摩尔比降至0.25时,氯取代不完全、聚合程度不高; S和Na₂S摩尔比增至0.7 : 1时,聚合物中可能形成了不稳定的累积S-S键;上述两方面都导致电极性能明显下降。     

Rank annihilation factor analysis for spectrophotometric study of complex formation equilibria

The use rank annihilation factor analysis (RAFA) for spectrophotometric studies of complex formation equilibria are proposed. One-step complex formation and two successive and mononuclear complex formation systems studied successfully by proposed methods. When the complex stability constant acts as an optimizing object, and simply combined with the pure spectrum of ligand, the rank of original data matrix can be reduced by one by annihilating the information of the ligand from the original data matrix. The residual standard deviation (R.S.D.) of the residual matrix after bilinearization of the background matrix is regarded as the evaluation function. The performance of the method has been evaluated by using synthetic data. For two-step successive complex formation systems, the effects of noise level and equilibrium constants K₁ and K₂ on output of algorithm are investigated. The applicability of method for resolving the two-step successive complex formation systems with full spectral overlapping of two complex species also is shown. Spectrophotometric studies of murexide-calcium, dithiazone-nickel and methyl thymol blue (MTB)-copper are used as experimental model systems with different complexation stoichiometries and spectral overlapping of involved components.