Refractive index of standard oils as a function of wavelength and temperature

The refractive indices (n) of eight standard oils from Physikalisch Technische Bundesanstalt, Germany were determined with an accuracy of ±1×10⁻⁴ by using Abbe Refractometer. The measurements were performed at temperature 20°C in the spectral range 0.4–0.7 μm. The experimental data were fitted to the simple Cauchy dispersion formula and the results were found to be consistent within the limits of experimental error. In all cases, the refractive index decreased monotonically with increasing wavelength. The refractive indices (n) of these oils have been measured as a function of the temperature t (20°C up to 50°C) at λ=0.589 μm and were found to have linear temperature dependencies. The refractive indices of the studied oils and the uncertainty in their values are calculated at λ=0.589. The Lorentz–Lorenz (L–L) formula has been tested and it was found to be valid with a maximum deviation of 0.4% and was used to calculate the molecular polarizability θ.     

Characterization of Metallo Bis(terpyridine) Diblock Polymers by Nonaqueous Capillary Zone Electrophoresis

A method of nonaqueous capillary zone electrophoresis (CZE) has been developed to characterize block (co)polymers of poly(ethylene oxide) and poly(styrene) containing metallo bis(terpyridine) complexes as bridging units. Specific CZE separation conditions had to be applied, with barium perchlorate dissolved in N-methylformamide (NMF) as background electrolyte and OV-1701-OH deactivated capillaries. For detection UV absorption was measured at a wavelength of 316 nm. Metallo diblock polymers with molecular weights up to 30,000 Da could be analyzed by the proposed nonaqueous CZE method. Experiments performed with polymeric compounds containing Fe, Ni or Ru as central metal ions showed that their electrophoretic mobilities were independent of the type of metal ion. Therefore, the data on the size of the polymeric compounds could be obtained using just one set of calibration standards. Polydispersities of the samples calculated from the experimental results were in correlation with the polydispersities of the polymers used in the synthesis of the metallo diblock polymers. Several polymeric samples contained metallo mono(terpyridine) complexes as impurities. These by-products could be separated from the main product. With symmetrical diblock polymers only one by-product was detected, while with an asymmetric diblock polymer two types of mono-complexes were found. The amount of the mono-complexes present as impurities was dependent on the type of central metal ion (Ni > Fe >> Ru).     

Studies on pre-hump and main fractions of cellulose-2,5-acetate in acetone

Technical cellulose-2.5-acetates (CA 2.5) were characterized regarding their carbohydrate composition in comparison to the raw material. The association of the CA 2.5 samples in acetone was studied by size exclusion chromatography (SEC) using various acetone grades and styrene divinylbenzene copolymer columns. In HPLC grade acetone with and without addition of 1% water up to three different pre-humps eluted in front of the main fraction of the polymer. The evaluation of the main peak by light scattering measurements resulted in high molar masses indicating that for these technical CA 2.5 samples even the main fraction is not dissolved without association. No pre-humps or association phenomena were observed after addition of 1 ppm LiBr to HPLC grade acetone or with p.a. grade acetone. In addition pre-hump enriched and pre-hump free fractions were isolated by fractionated precipitation. The carbohydrate composition of these fractions was determined and correlated with their association pattern in SEC investigations.     

Calculation of cyclodextrin-mediated enantiomer ratio shifting of racem norgestrel in aqueous solutions

Enantioselective solubility of rac-norgestrel was found in the presence of γ-cyclodextrin or hydroxypropyl-γ-cyclodextrin. In both cases the efficacious enantiomer was dissolved in greater extent. Calculating the molar absorptivity and molar ellipticity spectra of the γ- and hydroxypropyl-γ-cyclodextrin aqueous complexes, a simple and rapid direct circular dichroism (CD) spectrometric method was obtained for the determination of the enantiomer ratio in aqueous solutions.     

Molar extinction coefficients of solutions of some organic compounds

Molar extinction coefficients of aqueous solutions of some organic compounds, viz. formamide (CH₃NO),N-methylformamide (C₂H₅NO),NN-dimethylformamide (C₃H₇NO),NN-dimethylacetamide (C₄H₉NO), 1,4-dioxane (C₄H₈O₂₄), succinimide (C₄H₅NO₂) and solutions of acetamide (C₂H₅NO) and benzoic acid (C₇H₆O₂) in 1,4-dioxane (C₄H₈O₂) have been determined by narrow beam γ-ray transmission method at 81, 356, 511, 662, 1173 and 1332 keV. The experimental values of mass attenuation coefficients of these compounds have been used to calculate effective atomic numbers and electron densities. The additivity rule earlier used for aqueous solution has been extended to non-aqueous (1,4-dioxane) solutions.     

反相液体色谱中饱和醇保留行为的研究 Ⅰ.低碳醇保留行为与溶质分子结构的关系

本文从吸附-疏溶剂理论出发,根据热力学平衡观点,导出了一定固定相和流动相时,描述溶质保留行为与其分子结构关系的理论模型,并用之预测了饱和醇的保留值,获满意结果。从而表明本模型不但能用于同系物,而且亦可用于同分异构体及立体异构体保留行为的预测。     

Molar mass distributions by gradient liquid chromatography: predicting and tailoring selectivity

Interactive liquid chromatography (iLC) for polymer analysis is usually applied to the characterisation of distributions other than molar mass. In particular, its use for the determination of chemical-composition, functionality-type and tacticity distributions has been demonstrated. The application of iLC for the determination of molar mass distributions (MMDs), however, has not yet been fully explored. An expanded version of the reversed-phase liquid chromatography model has been developed to describe and predict how the retention behaviour of polydisperse polystyrene samples changes with molar mass. The relationship between molar mass and the parameters of the model has been investigated in some detail and non-linear correlations were found. From the model and the relationships between the model parameters and molar mass, calibration curves (retention time versus molar mass) were constructed to predict changes in chromatographic selectivity across a given molar mass range. These calibration curves were compared to experimentally obtained curves and, in most cases, excellent agreement was found. The dramatic enhancement in selectivity that can be obtained with iLC in comparison to size-exclusion chromatography (SEC) was illustrated by measuring matrix-assisted laser desorption ionisation (MALDI) MS spectra of fractions collected during a gradient-LC separation. In the low-molar mass range, essentially monodisperse fractions were obtained. Calibration curves, predicted by the model and validated experimentally using narrow-dispersity standards and MALDI-MS spectra of fractions, were used to determine the molar mass distribution of some narrowly distributed polystyrene samples. Molar mass distributions for such standards were found to be somewhat lower than the values reported by the manufacturers. The results also deviated from those obtained by MALDI-MS.     

Excess enthalpies of ethylbenzene + alkane systems at 25°C. An interpretation in terms of the Prigogine-Flory-Patterson model

The molar excess enthalpies for the ethylbenzene + n-decane and ethylbenzene + n-tetradecane systems have been measured at 25°C over the complete concentration range. These results and others from the literature for alkanes + ethylbenzene, and alkanes + toluene have been discussed in terms of the Prigogine-Flory-Patterson theory.     

NaCl(或KCl)-CH3OH-H2O体系的摩尔电导

CHaOH－HzO体系具有非常特殊的性质，同时在工业生产及临床治疗方面有着十分广泛的应用，文献中有大量地从不同角度就这类体系进行研究的报道．然而，就N3CI及KCI－CH30H－H20体系的电导研究而言，文献中仅有关干KCI－CH30H－H20（间隔20％CH30H）的部分研究工作．作为全面、系     

Refractive Indices, Densities and Excess Molar Volumes of Monoalcohols + Water

The refractive index, n _D , and density, ρ, of binary mixtures of monoalcohols + water, have been measured at a temperature of 298.15,K and atmospheric pressure. The variation of the refractive indices of these solutions has also been determined with temperature in the range T = (278.15 to 338.15) K and atmospheric pressure. A comparative study has been made of the refractive indices obtained experimentally and those calculated by means of the Lorentz-Lorenz [Theory of Electrons, Dover Phoenix (1952)] and Gladstone-Dale relations [Trans. R. Soc. London 148:887–902 (1858)]; in all cases, the Gladstone–Dale equation was seen to afford values similar to those obtained experimentally. Calculations have been made of the excess molar volumes, V ^E, and the molar refraction deviations, ΔR, of these mixtures and the differences between the experimental values for refractive index and those obtained by means of the Gladstone–Dale equation. Values of V ^E were compared with others in the literature. In all cases the V ^E values were negative, and in all cases, except in the methanol + water, ΔR showed a maximum for x = 0.8.