Effect of pressure on the low-temperature reaction of ethylene with N2O4

Calorimetric monitoring of the autoclave reaction N₂O₄ + C₂H₄ at –85 to +10 °C under argon pressure 10–30 bar revealed that the exothermic chemical reaction started at temperatures above –52 °C at 10 bar, whereas an intensive exothermic reaction started at –85 °C and pressure of 30 bar. IR study showed that oligo/polynitroethylene was formed at 30 bar, while carbonyl and hydroxy compound as well as nitrate R–ONO₂ formation occurred upon processing at 10 bar.     

Microwave‐assisted polycondensation of 4‐octylaniline with dibromoarylene

The Pd‐catalyzed polycondensation of 4‐octylaniline with various dibromoarylenes was carried out under microwave heating. Microwave heating led to a decrease in the reaction time and an increase in the molecular weight of the polymers as compared to conventional heating. Microwave heating also allowed the catalyst loading to be reduced to 1 mol %, yielding polymerization results that were comparable to those under conventional heating and 5 mol % catalyst. Investigations regarding field‐effect transistors and organic photovoltaic cells using the obtained poly(arylamine) with azobenzene units revealed that increasing the molecular weight of the polymer led to improved device performance, including hole mobility and power conversion efficiency. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 536–542     

Preparation and Characterization of Activated Carbon from Microwave and Conventional Heated Almond Shells Using Phosphoric Acid Activation

Activated carbon production from almond shells using phosphoric acid activation agent was achieved by applying both conventional heating and microwave heating in succession. The morphology and surface properties of activated carbon were studied using thermogravimetric and differential gravimetric analysis, Fourier-transform infrared spectroscopy, scanning electron microscopy, and Brunauer–Emmett–Teller analysis. A surface area of 1128 m²/g was achieved by optimizing the microwave power (500?W), microwave application time (15?minutes), conventional heating time (45?minutes), conventional heating temperature (500?°C), and the phosphoric acid:sample ratio (0.7:1). An adsorption capacity of methylene blue of 148?mg/g and an iodine value of 791?mg/g was obtained for the prepared activated carbon.     

微波消解-氢化物发生-原子荧光光谱法测定7种中草药中砷

利用原子荧光光谱法测定7种驱虫类中草药中的砷.实验采用微波消解样品,以盐酸为测定介质,硫脲-抗坏血酸为预还原剂,硼氢化钾为氢化剂,用氢化物发生-原子荧光光谱法测定砷含量.砷含量在10-100ng/mL浓度范围内线性关系好(r2=0.9924).回收率为93.83%-110.94%之间.方法简便、快速、灵敏、准确,可用于中草药中砷的测定.     

Microwave-assisted, efficient and regioselective Pd-catalyzed C-phenylation of halopyrimidines

We herein report that flash heating microwave irradiation is a helpful tool in the formation of arylpyrimidines from the corresponding halopyrimidines. The palladium-catalyzed cross-coupling reactions of 2,4-di- and 2,4,5-trihalopyrimidines with phenylboronic acid under the above conditions are described. By use of the appropriate catalyst and the adequate halopyrimidine, good regioselectivity can be achieved in the 2-, 4-, or 5-positions of the heterocycle. In addition, we show that this methodology is ameneable for the stepwise preparation of mono-, di-, and triphenylpyrimidines.     

空心阴极灯激发的微波等离子体炬原子/离子荧光光谱研究--钙的原子/离子荧光光谱

用强短脉冲供电技术的空心阴极灯作激发源、微波等离子体炬作原子／离子化器，建立了原子／离子荧光光谱实验装置。详细研究了微波等离子体功率、观察高度、空心阴极灯电流等因素对原子／离子荧光信号强度的影响，测量了系统对Ca的原子／离子荧光光谱的检出限。     

Sub-Doppler and Doppler spectroscopy of DCN isotopomers in the terahertz region: ground and first excited bending states (v1v2v3)=(0 1 0)

The rotational spectra of the deuterium cyanide isotopic species DCN, D¹³CN, DC¹⁵N, and D¹³C¹⁵N were recorded in the vibrational ground and first excited bending state (v₂=1) up to 2 THz. The R-branch transitions from J=3←2 to J=13←12 were measured with sub-Doppler resolution. These very high resolution (∼70 kHz) and precise (±3-10 kHz) saturation dip measurements allowed for resolving the underlying hyperfine structure due to the ¹⁴N nucleus in DCN and D¹³CN for transitions as high as J=10←9. Additional high JR-branch (J=25←24 to J=28←27) transitions around 2 THz and direct l-type (ΔJ=0, J=19 to J=25) transitions from 66 to 118 GHz were recorded in Doppler-limited resolution. For the ground state of D¹³C¹⁵N, the J=1←0 transition was measured for the first time. The transition frequency accuracies for the other deuterated species were significantly improved. These new experimental data, together with the available infrared rovibrational data and previously measured direct l-type transitions, were subjected to a global least squares analysis for each isotopomer. This yielded precise sets of molecular constants for the ground and first excited vibrational states, including the nuclear quadrupole and magnetic spin-rotation coupling constants of the ¹⁴N nucleus for DCN and D¹³CN. The hyperfine structure due to the D, ¹³C, and ¹⁵N nuclei have not been resolved, but led to a broadening of the observed saturation dips.     

Efficient microwave induced direct α-halogenation of carbonyl compounds

A novel and direct method for the synthesis of α-halocarbonyl compounds using sequential treatment of carbonyl compounds with [hydroxy(tosyloxy)iodo]benzene followed by magnesium halides under solvent-free microwave irradiation conditions is described.     

The Analysis and Improving of the Microwave Exciter in the Lower Hybrid Wave System

When we carry out lower hybrid wave heating and current driving plasma experiment at tokamak, we need mega-watt order of microwave power. The microwave signal at frequency of 2450 MHz is generated by a microwave exciter. According to the experiment＇s demands, the microwave exciter must provide output power of 1.5～ 2. 5 W with stabilized frequency and amplitude tobe used as the klystron input. Being amplified by the klystron, the microwave signal is transmitted through the transmitting system to the antenna and is emitted into the HL-2A tokamak. So we can see that the microwave exciter＇s function is very important to the lower hybrid wave heating and current driving plasma experiment.     

Microwave-accelerated Claisen rearrangements of allyl tetronates and tetramates

[3,3]-Sigmatropic rearrangements of allyl tetronates and allyl tetramates to give 3-allyltetronic or -tetramic acids, respectively, proceed within 20-60 min under microwave irradiation (300 W, 130-190 °C). Consecutive (homo)sigmatropic [1,5] H-shifts such as oxa-ene reactions are promoted less effectively, which allows the isolation of Claisen intermediates of sigmatropic domino sequences, in contrast to conventional heating.