Two-phase flow instabilities in a silicon microchannels heat sink

Two-phase flow instabilities are highly undesirable in microchannels-based heat sinks as they can lead to temperature oscillations with high amplitudes, premature critical heat flux and mechanical vibrations. This work is an experimental study of boiling instabilities in a microchannel silicon heat sink with 40 parallel rectangular microchannels, having a length of 15 mm and a hydraulic diameter of 194 μm. A series of experiments have been carried out to investigate pressure and temperature oscillations during the flow boiling instabilities under uniform heating, using water as a cooling liquid. Thin nickel film thermometers, integrated on the back side of a heat sink with microchannels, were used in order to obtain a better insight related to temperature fluctuations caused by two-phase flow instabilities. Flow regime maps are presented for two inlet water temperatures, showing stable and unstable flow regimes. It was observed that boiling leads to asymmetrical flow distribution within microchannels that result in high temperature non-uniformity and the simultaneously existence of different flow regimes along the transverse direction. Two types of two-phase flow instabilities with appreciable pressure and temperature fluctuations were observed, that depended on the heat to mass flux ratio and inlet water temperature. These were high amplitude/low frequency and low amplitude/high frequency instabilities. High speed camera imaging, performed simultaneously with pressure and temperature measurements, showed that inlet/outlet pressure and the temperature fluctuations existed due to alternation between liquid/two-phase/vapour flows. It was also determined that the inlet water subcooling condition affects the magnitudes of the temperature oscillations in two-phase flow instabilities and flow distribution within the microchannels.     

Detection of methyl salicylate using polymer-filled chemicapacitors

Methyl salicylate (MeS) is used as a chemical warfare agent simulant to test chemical protective garments and other individual personal protective gear. The accurate and real-time detection of this analyte is advantageous for various testing regimes. This paper reports the results of MeS vapor exposures on polymer-filled capacitance-based sensors at temperatures ranging from 15 °C to 50 °C under dry and humid conditions. Multiple capacitors were arranged in an array on a silicon chip each having a different sorptive polymer. The sensors used parallel-plate electrode geometry to measure the dielectric permittivity changes of each polymer when exposed to water and MeS vapor. Of the four polymers tested against MeS, the optimal polymer displayed near or sub-parts-per-million detection limits at 35 °C (0–80%RH).     

Micro- and Nanosensors,Recent Developments and Features: A Minireview

Recent developments on micro and nanosensors are discussed. The nano- and micro magnitude orders are not only related to the entire active area of the electrode, but also to the sizes of the active substances/matrix of the electrodes' membrane. Nowadays, Nanowires are the trend in nanosensors technology that permit the integration of nanosensors in (bio)chips and in devices for in vivo analysis.     

Analytic and numerical modeling of the transient dynamics of a microcantilever sensor

Microcantilevers have recently emerged as sensor components that hold the promise for robust detection of biological, chemical, and other security-related threats. Consequently, there has been a growing need to develop accurate and sophisticated methods for predicting a microcantilever's transient response to an arbitrary spatio-temporal load. To model the spatio-temporal dynamics of the microcantilever, the nonhomogeneous beam equation, a fourth-order partial differential equation, is used. This Letter presents an innovative analytical solution of this equation, including damping and spatio-temporal shifts. This solution is compared to a numerical, stable finite-differences implementation. Excellent agreement is shown for two examples of forcing by shifted spatio-temporal loads, including a finite-width Gaussian pulse. The computer code implementation is also discussed.     

Determination of the Apparent Michaelis Constant of Glucose Oxidase Immobilized on a Microelectrode with Respect to Oxygen

We report determination of the apparent Michaelis constant of glucose oxidase (GOx) immobilized on a microelectrode with respect to oxygen. We used a GOx‐modified microelectrode as a probe for scanning electrochemical microscopy. We detected hydrogen peroxide generated by the enzyme reaction at the microelectrode under controlling the oxygen concentration using water electrolysis at an interdigitated array (IDA) electrode. The response depends on the oxygen concentration, which is regulated by the microelectrode position and the potential applied to the IDA electrode. We estimated the apparent Michaelis constant with respect to oxygen in this experimental condition to be about 0.28 mM.     

Electrochemical Sensor Design Using Coplanar and Elevated Interdigitated Array Electrodes. A Computational Study

The time dependent diffusion equation for an interdigitated array (IDA) of coplanar and elevated electrodes is solved numerically by extrapolation of the fully implicit method using a problem adapted space grid. The simulations are performed for IDA electrodes in generator‐collector mode. The influence of the electrode height and the height of the diffusion space on the sensitivity and the response time is investigated.     

Adhesives: a new class of polymer coatings for surface acoustic wave sensors for fast and reliable process control applications

Fast and reliable on-line detection of organic vapors for control of chemical processes is a challenging application for a new type of analytical instruments: sensor systems based on an array of differently selective chemical sensors. In this work we present the use of mass-sensitive polymer coated surface acoustic wave sensors (SAWs). The sensors were initially coated with a standard set of polymers consisting of a known composition. But this first approach could not meet all requirements. Therefore, a new class of commercially available polymer coating, namely adhesives, was developed. The coating procedure was optimized and the aging process of the adhesives was carefully investigated. As a result the selectivity for ambitious separation problems arising from similar polarity of the components of typical solvent mixtures could be remarkably increased. The system was then applied in a real testing environment application at a chemical plant: the fast on-line control of a preparative reversed phase process HPLC (RP-PHPLC). Data from this industrial application are shown.     

Nanomolar detection with high sensitivity microfluidic absorption cells manufactured in tinted PMMA for chemical analysis

We describe a novel, cost effective and simple technique for the manufacture of high sensitivity absorption cells for microfluidic analytical systems. The cells are made from tinted polymethyl methacrylate (PMMA) in which microfluidic channels are fabricated. Two windows (typically 250 μm thick, resulting in little optical power loss) are formed at either end of the channel through which light is coupled. Unwanted stray light from the emitter passes through a greater thickness of the tinted substrate (typically the length of the cell) and is preferentially absorbed. In effect, this creates a pin-hole configuration over the length of the absorption cell, providing improved performances (sensitivity, S/N ratios, baseline noise and limit of detection) when used as an absorption cell compared to clear substrates. The method is used to achieve a LOD of 20 nM with a colourimetric iron assay and a LOD of 0.22 milli-absorption units with a pH assay.