可重构制造系统重组过程中设备选择模型的研究

根据生产任务选择加工设备进行制造资源重组是实现可重构制造系统的关键问题之一，由于设备的选择涉及到多种因素，既有定量指标，又有定性指标，传统的依靠人工经验的方法显得力不从心。本文首先结合实际情况，提出了一套设备选择评价体系，通过对模糊判断矩阵采用最小对数二乘法确定各评价因素的权重系数，针对定性指标和定量指标采用不同的方法确定其性能指标值，通过模糊积分对评判指标进行综合评判，最后进行了实例研究。所提出的方法有效地简化了决策过程，为可重构制造系统设备选择提供了一套行之有效的方法。     

Robust Speed Control of a Low Damped Electromechanical System Based on CRONE Control: Application to a Four Mass Experimental Test Bench

Robust speed control of a low damped electromechanical system with backlash is studied, controlled load angular speed being not measured. The proposed control strategy combines a Luenberger observer (load angular speed and load torque disturbance estimations) and a robust CRONE controller. The observer provides estimation of the load angular speed and of the disturbance torque applied on the load. Through the computation of only three independent parameters (as many as a PID controller), the CRONE controller permits to ensure the robust speed control of the load in spite of plant parametric variations and speed observation errors. The proposed control strategy is applied to a four mass experimental test bench.     

Structure analytical methods for quantitative reference applications

The analytical methods mass spectrometry, UV/Vis, IR, Raman, Fluorometry, XRD, Mössbauer, and NMR used to elucidate chemical structure are evaluated regarding their capabilities to be used as primary analytical techniques in quantitative measurements, considering the criteria in the CCQM definition of primary methods. This includes a review of the respective measurement equations, the evaluation of the measurement uncertainty, and a discussion of evidence for the “highest metrological level”, as obtained from intercomparisons in contest with other methods. It is shown that only few methods fulfill the CCQM criteria. Quantitative NMR spectroscopy is one of them and may be considered as a potential primary method as recommended by CCQM because of being free of empirical factors in the uncertainty budget.     

The application of the measurement uncertainty concept to in-process control in pharmaceutical development

 Any analytical data is used to provide information about a sample. The "possible error" of the measurement can be of extreme importance in order to have complete information. The measurement uncertainty concept is a way to achieve quantitative information about this "possible error" using an estimation procedure. On the basis of the analytical result, the chemist makes a decision on the next step of the development process. If the uncertainty is unknown, the information is not complete; therefore this decision might be impossible. The major problem for the in-process control (IPC) procedure is that not only the repeatability but also the intermediate precision (which expresses the variations within laboratories related to different days, different analysts, different equipment, etc.) has to be good enough to make a decision. Unfortunately, the statistical information achieved from one single analytical run only gives information about the repeatability. This paper shows that the estimation of the measurement uncertainty for IPC is a way to solve the problem and gives the necessary information about the quality of the procedure. An example demonstrates that an estimate of uncertainty based on the standard deviations of an analytical method gives a value similar to one based on the standard deviations obtained from a control chart. Therefore, the estimation is both a very useful and also a very cost-effective tool. Though measurement uncertainty cannot replace validation in general, it is a viable alternative to validation for all methods that will never be used routinely. Received: 24 May 1996 Accepted: 10 August 1996     

New approach to calibrating conductivity meters in the low conductivity range

There is currently a major issue with the calibration of conductivity meters used for high purity water: the lack of availability of a reference material or reference methods for low conductivity ranges (conductivity below 1 S cm^–1 at 25.0 °C, resistivity >1 M cm at 25.0 °C). This paper describes the current status of conductivity measurements in high purity water. A new and improved approach, currently being investigated, should allow us to make the calibration of conductivity meters used for low conductivity ranges traceable to the SI.Milipore, Milli-Q and Elix are registered trademarks of Millipore Corporation.     

IMEP in support of the comparability of measurement results across the Romanian chemical metrology infrastructure

On the basis of quantitative chemical measurements many important decisions are made in support of legislation or in industrial processes or social aspects. For this reason it is important to improve the quality of chemical measurement results and thus make them comparable and acceptable everywhere. The measurement quality is important to enable an equivalent implementation of the European Union regulations and directives across an enlarged EU. In this context, the European Commission–Joint Research Centre–Institute for Reference Materials and Measurement (EC-JRC-IRMM) set up a programme to improve the scientific basis for metrology in chemistry (MiC) in EU candidate countries in the framework of EU enlargement. Several activities were initiated, such as training, fellowships, sponsoring of seminars, conferences and participation in interlaboratory comparisons. To disseminate measurement traceability, IRMM provides through its International Measurement Evaluation Programme (IMEP) an interlaboratory tool to enable the benchmarking of laboratory performance. IMEP emphasizes the metrological aspects of measurement results, such as traceability and measurement uncertainty. In this way it has become a publicly available European tool for MiC. The Romanian Bureau of Legal Metrology – National Institute of Metrology (BRML-INM) actively supports the participation of Romanian authorized and field laboratories in IMEP interlaboratory comparisons. This paper describes the interest of Romanian laboratories participating in this programme, the analytical and metrological problems that became relevant during these exercises and some actions for improvement. The results from Romanian laboratories participating in IMEP-12 (water), IMEP-16 (wine), IMEP-17 (human serum) and IMEP-20 (tuna fish) are presented. To conclude, the educational and training activities at national level organized jointly by the Romanian National Institute of Metrology (INM) and IRMM are also mentioned.     

Towards a new edition of the “Guide to the expression of uncertainty in measurement”

The “Guide to the expression of uncertainty in measurement” (GUM) is an extremely important document. It unifies methods for calculating measurement uncertainty and enables the consistent interpretation and comparison of measurement results, regardless of who obtained these measurements and where they were obtained. Since the document was published in 1995, it has been realised that its recommendations do not properly address an important class of measurements, namely, non-linear indirect measurements. This drawback prompted the initiation of the revision of the GUM in the Working Group 1 of the Joint Committee for Guides in Metrology, which commenced in October 2006. The upcoming revision of the GUM provides the metrological community with an opportunity to improve this important document, in particular, to reflect developments in metrology that have occurred since the first GUM publication in 1995. Thus, a discussion of the directions for this revision is important and timely. By identifying several shortcomings of the GUM and proposing directions for its improvement, we hope this article will contribute to this discussion. Papers published in this section do not necessarily reflect the opinion of the Editors, the Editorial Board and the Publisher.     

Traceability of (values carried by) reference materials

 Traceability is a property of the result of a measurement. Since values carried by (reference) materials must also have been obtained, of necessity, by measurement, the definition of traceability also applies to reference materials. It is extremely helpful to give the traceability (of the origin) of a reference material a separate name, i.e. 'trackability'. An analysis of the function of values carried by reference materials, shows that they can fulfill different functions, depending on the intended use. One of the functions located outside the traceability chain – and hence not very relevant for establishing traceability – is evaluating the approximate size of the uncertainty of the measurement of an unknown sample by performing a similar measurement on a reference material, used as a 'simulated sample'. Another function is located inside the traceability chain, where the reference material is used as an added 'internal standard'. Then, the value carried by the reference material is essential for establishing the traceability of the measured value of an unknown sample. In the latter application, the reference material acts as an 'amount standard' (the certified value for amount is used). Received: 11 November 1999 / Accepted: 24 February 2000     

Evaluation of bias voltage effect on diamond‐like carbon coating properties deposited on tungsten carbide cobalt

Diamond‐like carbon (DLC) coatings are getting new trends for cutting tool applications. In this research work, the DLC coatings were deposited on 15 × 15 × 5‐mm tungsten carbide cobalt substrates with variation of bias voltage from 0 to 500 V. The DLC films of 400 nm were deposited using filter cathode vacuum arc system, and 100‐nm chromium interlayer was deposited by sputtering. The optimized conditions for plasma pretreatment at different argon flow rates and deposition rates with bias variation were found. The effect of bias voltage on microstructure, tribology, adhesion, and mechanical properties were evaluated. The characterization techniques employed were field emission electron microscopy, Raman spectroscopy, wear test, SEM, scratch test, and nano‐indentation. The effect of substrate pretreatment on film adhesion was also evaluated. It was observed that etching rate increased with the increase in Ar flow rate while DLC deposition and sputtering rates decreased with increase in the bias voltage. The characterization suggests the DLC coatings deposited at 0 V bias as optimum condition because of showing the best results among all other conditions. Copyright © 2014 John Wiley & Sons, Ltd.     

利用三维虚拟技术突破物质结构教学*——从演示型工具到探索型工具的转变

针对物质结构教学的抽象性,开发了一套基于三维虚拟技术的物质结构教学软件,可对结构模型进行旋转、平移、缩放、切割、镜像、插入或删除原子(团)及启停预先设置的动画等操作,强大的交互功能不仅能对分子或晶体结构如构造异构、立体异构、晶体的堆积方式、晶胞的划分、配位数、晶体结构中的空隙及空间利用率等问题进行效果极佳的可视化教学,另一方面,通过对B₁₂与C₆₀分子空间构型转变的探究揭示数学构型的重要性,通过对六方晶胞占有原子个数的探究修正晶胞模型,通过对金属晶体的4种基本堆积方式成因的探究提出“半密置层”概念来完善紧密堆积规律等案例,展示出三维虚拟技术在微观结构探索发现方面的巨大潜力。