New interpretations of XPS spectra of nickel metal and oxides

A current interpretation of XPS spectra of Ni metal assumes that the main 6 eV satellite is due to a two hole c3d⁹4s² (c is a core hole) final state effect. We report REELS observation in AES at low voltages of losses (plasmons and inter-band transitions) corresponding to the satellite structures in Ni metal 2p spectra. The satellite near 6 eV is attributed to a predominant surface plasmon loss. A current interpretation of Ni 2p spectra of oxides and other compounds is based on charge transfer assignments of the main peak at 854.6 eV and the broad satellite centred at around 861 eV to the cd⁹L and the unscreened cd⁸ final-state configurations, respectively (L is a ligand hole). Multiplet splittings have been shown to be necessary for assignment of Fe 2p and Cr 2p spectral profiles and chemical states. The assignments of Ni 2p states are re-examined with intra-atomic multiplet envelopes applied to Ni(OH)₂, NiOOH and NiO spectra. It is shown that the free ion multiplet envelopes for Ni²⁺ and Ni³⁺ simulate the main line and satellite structures for Ni(OH)₂ and NiOOH. Fitting the NiO Ni 2p spectral profile is not as straightforward as the hydroxide and oxyhydroxide. It may involve contributions from inter-atomic, non-local electronic coupling and screening effects with multiplet structures significantly different from the free ions as found for MnO. A scheme for fitting these spectra using multiplet envelopes is proposed.     

The steady state growth rate of a recrystallization front in regions of heterogeneous dislocation density

The paper investigates whether a change from a homogeneous to an inhomogeneous dislocation distribution, assumed to be caused by a slight additional deformation, can lead to an increase of the recrystallization temperature of a deformed metal. In this case, the higher temperature would indicate a more stable deformation structure despite the increase of stored energy. The recrystallization temperature is related to the growth rate. Hence, the steady state velocity of a recrystallization front moving either parallel or vertically to the stripes of a simplified two-dimensional heterogeneous dislocation distribution of parallel sections of higher and lower dislocation densities is calculated. The results show that if a front growths through the high and low density sections in series an overall slower rate despite higher mean dislocation density is, indeed, possible. However, growing in the parallel arrangement always leads to a higher growth rate compared with the homogeneous case of slightly less stored energy. Since in a real structure the faster growth is likely to succeed, the recrystallization temperature observed will be lowered with additional deformation in accordance with experimental experience.     

Ultrasonic-assisted leaching of trace metals from sediments as a function of pH

The effects of ultrasonication on the leaching of trace metals form sediments as a function of pH have been investigated using atomic absorption spectrometry. Cu, Pb, Ni, Zn and Mn were leached from sediments by ultrasonic effect using phthalate buffers at pH values of 2.2-6.0. Parameters influencing leaching, such as leaching time, solution matrix, wet or dry sample and final pH were evaluated. Results from ultrasonic leaching experiments were comparable to those of conventional procedure. In addition, this ultrasonic-assisted leaching method reduces the time required for conventional method approximately from 12 h to 25 min. Depending on the metal and sample type, metal removal increased linearly or exponentially with decreasing pH. The accuracy of the method was tested by comparing obtained results with this of conventional method. The average relative standard deviation (R.S.D.) of ultrasonic-assisted leaching method (ULM) varied between 1.71 and 3.00% for N = 36, depending on the analyte. This technique shows promise for studying chemical and biological availability and uptake/release processes for metals in sediment and soil as a function of pH.     

Mineral content and botanical origin of Spanish honeys

Eleven elements (Zn, P, B, Mn, Mg, Cu, Ca, Ba, Sr, Na and K) were determined by inductively plasma coupled spectrometry in 40 honey samples from different places of Spain and four different botanical origins: Eucalyptus (Eucalyptus sp.), Heather (Erica sp.), Orange-blossom (Citrus sinensis) and Rosemary (Rosmarinus officinalis). K, Ca and P show the higher levels with average concentrations ranged between 434.1-1935 mg kg⁻¹ for K; 42.59-341.0 mg kg⁻¹ for Ca and 51.17-154.3 mg kg⁻¹ for P. Levels of Cu (0.531-2.117 mg kg⁻¹), Ba (0.106-1.264 mg kg⁻¹) and Sr (0.257-1.462 mg kg⁻¹) are the lowest in all honey samples. Zn (1.332-7.825 mg kg⁻¹), Mn (0.133-9.471 mg kg⁻¹), Mg (13.26-74.38 mg kg⁻¹) and Na (11.69-218.5 mg kg⁻¹) concentrations were found strongly dependent on the kind of botanical origin.Results were submitted to pattern recognition procedures, unsupervised methods such as cluster and principal components analysis and supervised learning methods like linear discriminant analysis in order to evaluate the existence of data patterns and the possibility of differentiation of Spanish honeys from different botanical origins according to their mineral content. Cluster analysis shows four clusters corresponding to the four botanical origins of honey and PCA explained 71% of the variance with the first two PC variables. The best-grouped honeys were those from heather; eucalyptus honeys formed a more dispersed group and finally orange-blossom and rosemary honeys formed a less distinguishable group.     

Thermodynamic parameters of liquid ternary Fe1−x(Ni5/6Cr1/6)x alloys

Summary Computer-aidedKnudsen cell mass spectrometry is used for thermodynamic investigations on liquid ternary Fe_1–x(Ni_5/6Cr_1/6)_x alloys. The thermodynamic excess properties have been determined by means of the Digital Intensity-Ratio (DIR) method. Liquid ternary Fe_1–x(Ni_5/6Cr_1/6)_x alloys are characterized by exothermic molar heats of mixingH ^E, negative molar excessGibbs energiesG ^E, and negative molar excess entropiesS ^E. At 1850 K, the minimumH ^E value is –3120 J/mol (42.3 at.% Fe), the minimumG ^E value is –2540 J/mol (30 at.% Fe), and the minimumS ^E value is –0.44 J/(mol K) (60 at.% Fe). At 1850 K, the thermodynamic activities of Fe show slight negative deviations from the ideal behaviour for alloys with a Fe-content of less than 75 at.%, and ideal behaviour for the Fe-rich alloys (x _Fe>0.75).

---

Thermodynamische Parameter flüssiger ternärer Fe_1–x(Ni_5/6Cr_1/6)_x-Legierungen

Zusammenfassung Die Thermodynamik flüssiger ternärer Fe_1–x(Ni_5/6Cr_1/6)_x-Legierungen wurde mit Hilfe der computerunterstützten Knudsenzellen-Massenspektrometrie studiert. Die thermodynamische Auswertung der experimentellen Untersuchungen erfolgte nach der digitalen Intensitätsverhältnismethode (DIR). Flüssige ternäre Fe_1–x(Ni_5/6Cr_1/6)_x-Legierungen zeigen exotherme molare MischungswärmenH ^E, negative molareGibbssche ZusatzenergienG ^E, und negative molare ZusatzentropienS ^E. Bei 1850 K sind die Minimumswerte fürH ^E –3120 J/mol (42.3 At.% Fe), fürG ^E –2540 J/mol (30 At.% Fe) und fürS ^E –0.44 J/(mol K) (60 At.% Fe). Bei 1850 K zeigen die thermodynamischen Aktivitäten von Fe bei Legierungen mit einem Fe-Gehalt von höchstens 75 At.% leichte negative Abweichungen vom idealen Verhalten, die Fe-reichsten Legierungen (x _Fe>0.75) verhalten sich hingegen nahezu ideal.

     

Determination of butyltins in environmental samples using sodium tetraethylborate derivatisation: characterisation and minimisation of interferences

Interferences affecting the determination of butyltin species by sodium tetraethylborate (STEB) derivatisation followed by purge-trap preconcentration were systematically studied using synthetic solutions, natural water samples and sediment extracts. Substances that did not cause interferences included most common cations (apart from those metal ions listed below), anions, metalloids and polar organic compounds. Natural organic matter (NOM) specifically interfered with tributyltin (TBT) due to a mechanism involving partitioning of the butyltin to the hydrophobic portions of the NOM. The metal ions Ag(I) (≥2 μM), Cd(II) (≥2 μM), Cu(II) (≥0.5 μM) interfered predominantly with the determination of monobutyltin (MBT) due to catalytic degradation of the STEB reagent. Pb(II) (≥14 μM) interfered with butyltin determination by an unknown mechanism. Other interferences to the purge-trap method were shown to occur in the presence of chelating agents (e.g. EDTA) or hydrophobic liquids such as diesel fuel. A mixture comprising methanol (MeOH), EDTA and Mn(II) was used to partially mask the effect of interfering NOM and metals. Spike recoveries (mean±S.D. of n=7 different samples) of MBT, dibutyltin (DBT) and TBT in contaminated natural water samples were improved from 70±36,90±11 and 91±24 to 102±10,98±3 and 98±4%, respectively. Spike recoveries (mean±S.D. of n=5 different samples) of MBT, DBT and TBT in aliquots of sediment extracts were improved from 86±17,79±18 and 59±32 to 97±6.2,103±3.6 and 103±5.0%, respectively. The ability to analyse larger aliquots of sediment extracts in the presence of the masking mixture improved the detection limit four-fold if MBT and DBT determination was required and 10-fold if only TBT determination was required.     

Local structure of core/shell nanocrystalline particles produced by surfactant-assisted ball milling of Fe powder in paraffin

Surfactant-assisted ball milling of the Fe powder in paraffin has been used for fabrication of core–shell nanocrystalline particles. The local atomic structure of the bulk and surface layers of the mechanically milled particles has been studied using X-ray absorption spectroscopic techniques with synchrotron radiation from the DORIS storage ring at DESY, Hamburg. Regardless of milling environment composition, the as-prepared powders were shown to be characterized by a significant drop in the EXAFS signal intensity and coordination numbers of the Fe–Fe pairs due to the formation of nanocrystalline state in the particles. It has been shown that an addition of perfluorononanoic acid as a surfactant has a more prominent effect on the structure of the shell layers. The effect is revealed as an appearance of light element atoms (O, F, C) in the local atomic environment of the Fe atoms due to formation of oxide, carbide and adsorbed structures of different types in the particle shell.     

Polymer-Mercury Coated Screen-Printed Sensors for Electrochemical Stripping Analysis of Heavy Metals

In the perspective of in-field stripping analysis of heavy metals, the use and disposal of toxic mercury solutions (necessary to plate a mercury film on a carbon electrode surface) presents a problem. The aim of this work was the development of mercury coated screen-printed electrodes previously prepared in the lab and ready to use in-field. Thus some commercially available polymers like Nafion®, Eastman Kodak AQ29®, and Methocel® were investigated as mercury entrapping systems for electrochemical stripping analysis of heavy metals. Screen-printed disposable cells with a silver pseudo-reference electrode, a graphite counter electrode, and a graphite working electrode were used. To modify the sensor, the polymer solution was cast onto the carbon working electrode surface. Detection limits of 0.8 and 1 μg/L were obtained for lead and cadmium respectively. Since Methocel® based electrodes showed the best performance, they were used for the analysis of real samples. The results were compared with those obtained using a classical thin mercury film electrode and ICP spectroscopy.

All the experiments reported here were performed in un-deareated solutions as required for in-field analysis.     

Rapid reduction of titanium dioxide nano-particles by reduction with a calcium reductant

Micro-, submicron-, and nano-scale titanium dioxide particles were reduced by reduction with a metallic calcium reductant in calcium chloride molten salt at 1173 K, and the reduction mechanism of the oxides by the calcium reductant was explored. These oxide particles, metallic calcium as a reducing agent, and calcium chloride as a molten salt were placed in a titanium crucible and heated under an argon atmosphere. Titanium dioxide was reduced to metallic titanium through a calcium titanate and lower titanium oxide, and the materials were sintered together to form a micro-porous titanium structure in molten salt at high temperature. The reduction rate of titanium dioxide was observed to increase with decreasing particle size; accordingly, the residual oxygen content in the reduced titanium decreases. The obtained micro-porous titanium appeared dark gray in color because of its low surface reflection. Micro-porous metallic titanium with a low oxygen content (0.42 wt%) and a large surface area (1.794 m² g⁻¹) can be successfully obtained by reduction under optimal conditions.     

Effect of bias voltage and electrodes size on the Pd conductance histograms

Conductance histograms of palladium nanocontacts in ultra high vacuum (UHV) were experimentally studied at room temperature using scanning tunneling microscope (STM). Our results show that the resolution of the pure Pd peaks, at 1.8 and around 3G₀, in the histograms, depends on the bias voltage and the electrodes size. The size of the electrodes should be as small as possible to achieve the higher extraction of hydrogen from them and therefore preventing the diffusion of H from the bulk to the nanocontacts during the conductance measurements, particularly at low bias voltage. This could explain why peaks have not been observed previously in the Pd histograms, using STM techniques in UHV.